Cons-n-Stuff/Solder-Plate
1
0
Fork 0
mirror of https://github.com/arwidcool/Solder-Plate.git synced 2025-02-26 06:48:27 +01:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' of https://github.com/arwidcool/Solder-Plate

Browse Source
This commit is contained in:
-help 2024-02-14 12:53:04 +02:00
commit 0f3d4a2d65
1 changed files with 2 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
README.md
View File

@ -19,7 +19,7 @@ This repository contains the source code and design files for a Solder Plate Con
- 3 indicator LED's. They work for both menu and REFLOW profiles (blinking while on the current stage and solid once the profile stage is complete).
- Buzzer for complete notification
- Buck- Converter for input voltage, allowing up to 24V in
- 24V+ rated input voltage stage components allowing theoretically up to 24V to be used (not yet tested)
- 24V+ rated input voltage stage components allowing up to 24V to be used (Depending on powersupply trip option the "max" pwm needs to be lowered to not trip power suppply safety)
- Optional fan for cooling stage (not yet installed)
= Included are files for a case and a guard for the detachable plate terminal guard.
@ -65,8 +65,6 @@ JCM from the Discord explained the process pretty good:
- Configure the flasher options for your Arduino Nano and flash it
- Connect D6 of your Arduino Nano over the 4.7kOhm resistor to the UPDI pin of the board and 5V to 5V and GND to 0V
- Add the MegaCoreX hardware package to the Ardunio IDE (see https://github.com/MCUdude/MegaCoreX#how-to-install)
- Install the Adafruit_GFX, Adafruit_SSD1306, DallasTemperature and Debounce2 libraries with the Library Manager (you might not need all of them depending on which firmware you plan to use)
- Download and open the ino you want to upload to the ATMEGA4809 (https://github.com/DerSpatz/PCB-reflow-solder-heat-plate/blob/main/Firmware/pcb_reflow_fw/pcb_reflow_fw.ino)
- Select the options for the programmer **(Board: ATmega4809, Clock: Internal 16 MHz, BOD: 2.6V or 2.7V, EEPROM: retained, Pinout: 48 pin standard, Reset pin: Reset, Bootloader:Optiboot:Uart0(Defualt pins))** and select the port of your Ardunio Nano as Port
- Make sure the programmer selected is SerialUPDI or JTAG2UPDI
- Select Burn Bootloader and see if it runs through
@ -146,7 +144,7 @@ To open a PlatformIO project in VSCode with the PlatformIO extension, follow the
### Usage
Power On: Connect the controller with a 12V 5A(Tested working) or 24V 5A PSU (Untested)
Power On: Connect the controller with a 12V 5A(Tested working) or 24V 5A PSU (Tested working with max PWM maybe reduced)
Set Profile: Navigate the menu and choose the desired reflow profile
Start Soldering: Place your PCB and components on the hotplate and start the profile