Taiko-Input/QT-APP/README_EN.md

# Host Computer
    QT, WIN64
    The host computer software is used to configure the parameters of the sampling microcontroller.

[中文版](./README.md)

[Home](../)


## Instructions

![Screenshot](./img/img.png  "Screenshot")
Screenshot  

### Software Interface

- A-Taiko sensor channel sequence configuration
- B-Input configuration-Trigger threshold (triggering is done in hardware, no obvious effect in software configuration)
- C-Input configuration-Multiplication factor (configure this when a certain sensor is exceptionally sensitive or insensitive, C for reset)
- D-Output time configuration, H for hold time when pressing, L for hold time when releasing, no response to other inputs during hold time
- E-Shielding configuration (used to calculate crosstalk caused by the physical structure of the taiko)
- F-Shielding configuration-Single response (selecting this will trigger only one sensor each time)
- G-Shielding configuration-Calculate rounds (set to 0 to disable calculation, directly trigger according to the fastest speed)
- H-Some default parameters (for Taiko Force and arcade taiko)
- I-Serial port selection
- J-Select the parameter group on the upload board
- K-Upload parameter button
- L-Download parameter button (this step does not store data, data will be lost when the microcontroller is reset)
- M-Save parameter button
- N-Software status

### Configuration Process

- 1 Select the serial port, click upload, and the status will be displayed as `Success` (used to determine if the connection is successful)
- 2 Reset the preset parameters according to your needs or upload old parameters
    - For modifications based on the old parameters, select `Load Saved`, and then press the upload parameter button
    - For modifications based on the default configuration, click the desired default configuration button (the two default configurations only differ in taiko mapping)
- 3 After making modifications, click the download parameter button and confirm if the parameters are reasonable on the taiko
- 4 Click the save parameter button


## Other Instructions
- When using single taiko hardware, the parameters for the second taiko are meaningless
- Default configurations may have issues; you can make fine adjustments based on the default parameters to suit your taiko
- The sensor wire sequence of the taiko can be remapped through this APP.
update md 2023-07-06 11:27:45 +02:00			`# Host Computer`
			`QT, WIN64`
			`The host computer software is used to configure the parameters of the sampling microcontroller.`

update md 2023-07-08 12:47:28 +02:00			`[中文版](./README.md)`
update md 2023-07-06 11:27:45 +02:00
			`[Home](../)`


			`## Instructions`

			`![Screenshot](./img/img.png "Screenshot")`
			`Screenshot`

			`### Software Interface`

update md 2023-07-22 22:17:27 +02:00			`- A-Taiko sensor channel sequence configuration`
update md 2023-07-06 11:27:45 +02:00			`- B-Input configuration-Trigger threshold (triggering is done in hardware, no obvious effect in software configuration)`
			`- C-Input configuration-Multiplication factor (configure this when a certain sensor is exceptionally sensitive or insensitive, C for reset)`
			`- D-Output time configuration, H for hold time when pressing, L for hold time when releasing, no response to other inputs during hold time`
update md 2023-07-22 22:17:27 +02:00			`- E-Shielding configuration (used to calculate crosstalk caused by the physical structure of the taiko)`
update md 2023-07-06 11:27:45 +02:00			`- F-Shielding configuration-Single response (selecting this will trigger only one sensor each time)`
			`- G-Shielding configuration-Calculate rounds (set to 0 to disable calculation, directly trigger according to the fastest speed)`
update md 2023-07-22 22:17:27 +02:00			`- H-Some default parameters (for Taiko Force and arcade taiko)`
update md 2023-07-06 11:27:45 +02:00			`- I-Serial port selection`
			`- J-Select the parameter group on the upload board`
			`- K-Upload parameter button`
			`- L-Download parameter button (this step does not store data, data will be lost when the microcontroller is reset)`
			`- M-Save parameter button`
			`- N-Software status`

			`### Configuration Process`

			- 1 Select the serial port, click upload, and the status will be displayed as `Success` (used to determine if the connection is successful)
			`- 2 Reset the preset parameters according to your needs or upload old parameters`
			- For modifications based on the old parameters, select `Load Saved`, and then press the upload parameter button
update md 2023-07-22 22:17:27 +02:00			`- For modifications based on the default configuration, click the desired default configuration button (the two default configurations only differ in taiko mapping)`
update 2023-07-29 18:03:35 +02:00			`- 3 After making modifications, click the download parameter button and confirm if the parameters are reasonable on the taiko`
			`- 4 Click the save parameter button`
update md 2023-07-06 11:27:45 +02:00

			`## Other Instructions`
update md 2023-07-22 22:17:27 +02:00			`- When using single taiko hardware, the parameters for the second taiko are meaningless`
			`- Default configurations may have issues; you can make fine adjustments based on the default parameters to suit your taiko`
			`- The sensor wire sequence of the taiko can be remapped through this APP.`