Initial commit

This commit is contained in:
AnalogDragon 2023-04-19 20:18:28 +08:00
commit d85bfb19f5
1198 changed files with 779954 additions and 0 deletions

2
.gitattributes vendored Normal file
View File

@ -0,0 +1,2 @@
# Auto detect text files and perform LF normalization
* text=auto

40
HW/.gitignore vendored Normal file
View File

@ -0,0 +1,40 @@
# For PCBs designed using KiCad: http://www.kicad-pcb.org/
# Format documentation: http://kicad-pcb.org/help/file-formats/
*.step
*.stp
*.wrl
# Temporary files
*.000
*.bak
*.bck
*.kicad_pcb-bak
*.sch-bak
*~
_autosave-*
*.tmp
*-cache.lib
*-rescue.lib
*-save.pro
*-save.kicad_pcb
fp-info-cache
# Netlist files (exported from Eeschema)
*.net
# Autorouter files (exported from Pcbnew)
*.dsn
*.ses
# Exported Fabrication files
*.gbr
*.drl
*.prl
*.kicad_prl
*.zip
# Exported BOM files
*.xml
*.csv
*.html

21
HW/README.md Normal file
View File

@ -0,0 +1,21 @@
# Taiko Input 硬件
Taiko Input 硬件
分为双鼓与单鼓硬件,双鼓设计用于街机
### 双鼓硬件
[硬件工程](./taiko-io/)
[原理图]
### 单鼓硬件
[硬件工程](./taiko-io-mini/)
[原理图]
## 前端原理
采用了与SIF Board相同的设计
<center>图注</center>
模拟前端主要是将鼓传感器的脉冲信号放大后积分,使信号明显可采样,然后进行了半波整流。处理后的信号直接输入给了采样单片机。

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

243
HW/taiko-io/new_io-all.pos Normal file
View File

@ -0,0 +1,243 @@
### Footprint positions - created on Wed Mar 15 14:21:56 2023 ###
### Printed by KiCad version (7.0.0)
## Unit = mm, Angle = deg.
## Side : All
# Ref Val Package PosX PosY Rot Side
C1 2.2nF/50V C_0603_1608Metric 38.9890 -42.4180 0.0000 top
C2 2.2nF/50V C_0603_1608Metric 38.9890 -44.1960 0.0000 top
C3 2.2nF/50V C_0603_1608Metric 38.9890 -60.1980 0.0000 top
C4 2.2nF/50V C_0603_1608Metric 38.9890 -61.9760 0.0000 top
C5 4.7uF/16V C_0603_1608Metric 52.3240 -37.0840 -90.0000 top
C6 4.7uF/16V C_0603_1608Metric 52.3240 -49.5300 90.0000 top
C7 4.7uF/16V C_0603_1608Metric 52.3240 -54.8640 -90.0000 top
C8 4.7uF/16V C_0603_1608Metric 52.3240 -67.3100 90.0000 top
C9 2.2nF/50V C_0603_1608Metric 38.9890 -77.9780 0.0000 top
C10 2.2nF/50V C_0603_1608Metric 38.9890 -79.7560 0.0000 top
C11 2.2nF/50V C_0603_1608Metric 38.9890 -95.7580 0.0000 top
C12 2.2nF/50V C_0603_1608Metric 38.9890 -97.5360 0.0000 top
C13 4.7uF/16V C_0603_1608Metric 52.3240 -72.6440 -90.0000 top
C14 4.7uF/16V C_0603_1608Metric 52.3240 -85.0900 90.0000 top
C15 4.7uF/16V C_0603_1608Metric 52.3240 -90.4240 -90.0000 top
C16 4.7uF/16V C_0603_1608Metric 52.3240 -102.8700 90.0000 top
C17 100nF/50V C_0603_1608Metric 42.9260 -43.3070 0.0000 top
C18 100nF/50V C_0603_1608Metric 55.1180 -43.3070 0.0000 top
C19 100nF/50V C_0603_1608Metric 42.9260 -61.0870 0.0000 top
C20 100nF/50V C_0603_1608Metric 55.1180 -61.0870 0.0000 top
C21 100nF/50V C_0603_1608Metric 42.9260 -78.8670 0.0000 top
C22 100nF/50V C_0603_1608Metric 55.1180 -78.8670 0.0000 top
C23 100nF/50V C_0603_1608Metric 42.9260 -96.6470 0.0000 top
C24 100nF/50V C_0603_1608Metric 55.1180 -96.6470 0.0000 top
C25 10nF/50V C_0603_1608Metric 57.9120 -64.1350 90.0000 top
C26 10nF/50V C_0603_1608Metric 57.9120 -99.6950 90.0000 top
C27 10nF/50V C_0603_1608Metric 57.9120 -58.0390 -90.0000 top
C28 10nF/50V C_0603_1608Metric 57.9120 -93.5990 -90.0000 top
C29 10nF/50V C_0603_1608Metric 57.9120 -46.3550 90.0000 top
C30 10nF/50V C_0603_1608Metric 57.9120 -81.9150 90.0000 top
C31 10nF/50V C_0603_1608Metric 57.9120 -40.2590 -90.0000 top
C32 10nF/50V C_0603_1608Metric 57.9120 -75.8190 -90.0000 top
C33 10uF/16V C_0603_1608Metric 73.9140 -39.3700 0.0000 top
C34 22uF/6.3V C_0603_1608Metric 73.9140 -34.0360 180.0000 top
C35 1uF/25V C_0402_1005Metric 68.4530 -37.0840 90.0000 top
C36 100nF/50V C_0402_1005Metric 67.3100 -37.0840 90.0000 top
C37 100nF/50V C_0402_1005Metric 66.1670 -37.0840 90.0000 top
C38 100nF/50V C_0402_1005Metric 64.3890 -37.0840 90.0000 top
C39 1uF/25V C_0402_1005Metric 68.7070 -100.7110 90.0000 top
C40 100nF/50V C_0402_1005Metric 67.4370 -100.7110 -90.0000 top
C41 100nF/50V C_0402_1005Metric 66.2940 -100.7110 -90.0000 top
C42 10uF/16V C_0603_1608Metric 73.1520 -98.0440 180.0000 top
C43 22uF/6.3V C_0603_1608Metric 70.3580 -100.7110 90.0000 top
C44 100nF/50V C_0603_1608Metric 83.0870 -81.6610 0.0000 top
C45 100nF/50V C_0603_1608Metric 83.0870 -80.0100 0.0000 top
C46 100nF/50V C_0603_1608Metric 83.0870 -78.3590 0.0000 top
C47 100nF/50V C_0603_1608Metric 83.0870 -76.7080 0.0000 top
C48 100nF/50V C_0603_1608Metric 83.0870 -96.2660 0.0000 top
C49 100nF/50V C_0603_1608Metric 83.0870 -94.6150 0.0000 top
C50 100nF/50V C_0603_1608Metric 83.0870 -92.9640 0.0000 top
C51 100nF/50V C_0603_1608Metric 83.0870 -91.3130 0.0000 top
C52 100nF/50V C_0402_1005Metric 70.9930 -80.1370 -90.0000 top
C53 1nF/50V C_0402_1005Metric 70.9930 -92.7100 90.0000 top
C54 1nF/50V C_0402_1005Metric 72.2630 -92.7100 90.0000 top
C55 100nF/50V C_0402_1005Metric 74.2950 -31.8770 180.0000 top
C56 10uF/16V C_0603_1608Metric 53.9750 -112.9030 90.0000 top
C57 10uF/16V C_0603_1608Metric 53.9750 -109.8550 90.0000 top
C58 100nF/50V C_0603_1608Metric 52.3240 -112.9030 90.0000 top
C59 100nF/50V C_0603_1608Metric 52.3240 -109.8550 90.0000 top
C60 4.7uF/16V C_0603_1608Metric 48.5140 -113.5380 0.0000 top
C61 220uF/10V CP_Radial_D6.3mm_P2.50mm 62.6110 -107.6960 90.0000 top
C62 10uF/16V C_0603_1608Metric 68.1990 -105.6640 0.0000 top
C63 10uF/16V C_0603_1608Metric 71.6280 -32.1310 180.0000 top
D1 BAT54S SOT-23 38.9890 -39.7510 0.0000 top
D2 BAT54S SOT-23 38.9890 -46.8630 0.0000 top
D3 BAT54S SOT-23 38.9890 -57.5310 0.0000 top
D4 BAT54S SOT-23 38.9890 -64.6430 0.0000 top
D5 1N4148WS SOD_323_1 48.7680 -36.5760 -90.0000 top
D6 1N4148WS SOD_323_1 48.7680 -50.0380 90.0000 top
D7 1N4148WS SOD_323_1 48.7680 -54.3560 -90.0000 top
D8 1N4148WS SOD_323_1 48.7680 -67.8180 90.0000 top
D9 1N4148WS SOD_323_1 54.9910 -39.7510 180.0000 top
D10 1N4148WS SOD_323_1 54.9910 -46.8630 180.0000 top
D11 1N4148WS SOD_323_1 54.9910 -57.5310 180.0000 top
D12 1N4148WS SOD_323_1 54.9910 -64.6430 180.0000 top
D13 BAT54S SOT-23 38.9890 -75.3110 0.0000 top
D14 BAT54S SOT-23 38.9890 -82.4230 0.0000 top
D15 BAT54S SOT-23 38.9890 -93.0910 0.0000 top
D16 BAT54S SOT-23 38.9890 -100.2030 0.0000 top
D17 1N4148WS SOD_323_1 48.7680 -72.1360 -90.0000 top
D18 1N4148WS SOD_323_1 48.7680 -85.5980 90.0000 top
D19 1N4148WS SOD_323_1 48.7680 -89.9160 -90.0000 top
D20 1N4148WS SOD_323_1 48.7680 -103.3780 90.0000 top
D21 1N4148WS SOD_323_1 54.9910 -75.3110 180.0000 top
D22 1N4148WS SOD_323_1 54.9910 -82.4230 180.0000 top
D23 1N4148WS SOD_323_1 54.9910 -93.0910 180.0000 top
D24 1N4148WS SOD_323_1 54.9910 -100.2030 180.0000 top
D25 1N5819WS SOD_323_1 78.1812 -39.0144 0.0000 top
D26 1N5819WS SOD_323_1 78.1812 -36.9824 0.0000 top
D28 D_TVS SOD_523_1 73.4060 -106.9340 90.0000 top
D29 D_TVS SOD_523_1 71.3740 -106.9340 90.0000 top
D32 BLUE_LED LED_0603_1608Metric 96.2405 -29.2100 180.0000 top
D33 RED_LED LED_0603_1608Metric 96.2405 -30.8610 180.0000 top
D34 RED_LED LED_0603_1608Metric 96.2405 -32.5120 180.0000 top
D35 BLUE_LED LED_0603_1608Metric 96.2405 -34.1630 180.0000 top
D36 BLUE_LED LED_0603_1608Metric 96.2405 -36.1950 180.0000 top
D37 RED_LED LED_0603_1608Metric 96.2405 -37.8460 180.0000 top
D38 RED_LED LED_0603_1608Metric 96.2405 -39.4970 180.0000 top
D39 BLUE_LED LED_0603_1608Metric 96.2405 -41.1480 180.0000 top
D40 BLUE_LED LED_0603_1608Metric 96.2660 -43.3070 180.0000 top
D41 RED_LED LED_0603_1608Metric 96.2660 -44.9580 180.0000 top
D42 RED_LED LED_0603_1608Metric 96.2660 -46.6090 180.0000 top
D43 BLUE_LED LED_0603_1608Metric 96.2660 -48.2600 180.0000 top
F1 0.5A/30V Fuse_0805_2012Metric 68.3260 -107.6960 180.0000 top
J1 Conn_02x08_Odd_Even IDC-Header_2x08-1MP_P2.54mm_Latch6.5mm_Vertical 32.7330 -78.8900 180.0000 top
J2 Conn_02x04_Odd_Even IDC-Header_2x04_P2.54mm_Vertical 32.7525 -41.8100 180.0000 top
J3 Conn_02x04_Odd_Even IDC-Header_2x04_P2.54mm_Vertical 32.7525 -105.8100 180.0000 top
J4 Conn_01x04 PinSocket_1x04_P2.00mm_Vertical 83.3440 -24.3840 90.0000 top
J5 Conn_01x04 PinSocket_1x04_P2.00mm_Vertical 83.3440 -27.5590 90.0000 top
J6 Conn_01x02 PinHeader_1x02_P2.54mm_Vertical 77.3430 -107.1930 180.0000 top
J7 Conn_02x08_Odd_Even IDC-Header_2x08-1MP_P2.54mm_Latch6.5mm_Vertical 88.6750 -77.5970 0.0000 top
J8 Conn_02x20_Odd_Even B40B-XADSS-N-A 100.0560 -79.1200 90.0000 top
J9 USB_C_Receptacle_USB2.0 USB_C_Receptacle_HRO_TYPE-C-31-M-12 70.9930 -116.5860 0.0000 top
J10 USB_C_Receptacle_USB2.0 USB_C_Receptacle_HRO_TYPE-C-31-M-12 71.0000 -23.4430 180.0000 top
J11 Conn_02x18_Odd_Even B36B-XADSS-N-A 94.9760 -81.6270 90.0000 top
JP1 Jumper_2_Open JP_0603 62.9920 -28.8290 -90.0000 top
JP2 Jumper_2_Open JP_0603 61.3410 -28.8290 -90.0000 top
JP3 Jumper_2_Open JP_0603 59.6900 -28.8290 -90.0000 top
JP4 Jumper_2_Open JP_0603 58.0390 -28.8290 -90.0000 top
R1 1M R_0603_1608Metric 42.9260 -41.5290 0.0000 top
R2 1M R_0603_1608Metric 42.9260 -45.0850 0.0000 top
R3 1M R_0603_1608Metric 42.9260 -59.3090 0.0000 top
R4 1M R_0603_1608Metric 42.9260 -62.8650 0.0000 top
R5 3.3K R_0603_1608Metric 42.9260 -39.7510 0.0000 top
R6 3.3K R_0603_1608Metric 42.9260 -46.8630 0.0000 top
R7 3.3K R_0603_1608Metric 42.9260 -57.5310 0.0000 top
R8 3.3K R_0603_1608Metric 42.9260 -64.6430 0.0000 top
R9 200K R_0603_1608Metric 42.9260 -37.8460 0.0000 top
R10 NC R_0603_1608Metric 42.9260 -36.1950 0.0000 top
R11 200K R_0603_1608Metric 42.9260 -48.7680 0.0000 top
R12 NC R_0603_1608Metric 42.9260 -50.4190 0.0000 top
R13 200K R_0603_1608Metric 42.9260 -55.6260 0.0000 top
R14 NC R_0603_1608Metric 42.9260 -53.9750 0.0000 top
R15 200K R_0603_1608Metric 42.9260 -66.5480 0.0000 top
R16 NC R_0603_1608Metric 42.9260 -68.1990 0.0000 top
R17 100K R_0603_1608Metric 46.1010 -37.8460 0.0000 top
R18 0R R_0603_1608Metric 46.1010 -36.1950 0.0000 top
R19 100K R_0603_1608Metric 46.1010 -48.7680 0.0000 top
R20 0R R_0603_1608Metric 46.1010 -50.4190 0.0000 top
R21 100K R_0603_1608Metric 46.1010 -55.6260 0.0000 top
R22 0R R_0603_1608Metric 46.1010 -53.9750 0.0000 top
R23 100K R_0603_1608Metric 46.1010 -66.5480 0.0000 top
R24 0R R_0603_1608Metric 46.1010 -68.1990 0.0000 top
R25 47R R_0603_1608Metric 50.6730 -37.0840 -90.0000 top
R26 47R R_0603_1608Metric 50.6730 -49.5300 90.0000 top
R27 47R R_0603_1608Metric 50.6730 -54.8640 -90.0000 top
R28 47R R_0603_1608Metric 50.6730 -67.3100 90.0000 top
R29 4.7K R_0603_1608Metric 53.9750 -37.0840 -90.0000 top
R30 4.7K R_0603_1608Metric 53.9750 -49.5300 90.0000 top
R31 4.7K R_0603_1608Metric 53.9750 -54.8640 -90.0000 top
R32 4.7K R_0603_1608Metric 53.9750 -67.3100 90.0000 top
R33 10K R_0603_1608Metric 55.1180 -41.6560 180.0000 top
R34 10K R_0603_1608Metric 55.1180 -44.9580 180.0000 top
R35 10K R_0603_1608Metric 55.1180 -59.4360 180.0000 top
R36 10K R_0603_1608Metric 55.1180 -62.7380 180.0000 top
R37 1M R_0603_1608Metric 42.9260 -77.0890 0.0000 top
R38 1M R_0603_1608Metric 42.9260 -80.6450 0.0000 top
R39 1M R_0603_1608Metric 42.9260 -94.8690 0.0000 top
R40 1M R_0603_1608Metric 42.9260 -98.4250 0.0000 top
R41 3.3K R_0603_1608Metric 42.9260 -75.3110 0.0000 top
R42 3.3K R_0603_1608Metric 42.9260 -82.4230 0.0000 top
R43 3.3K R_0603_1608Metric 42.9260 -93.0910 0.0000 top
R44 3.3K R_0603_1608Metric 42.9260 -100.2030 0.0000 top
R45 200K R_0603_1608Metric 42.9260 -73.4060 0.0000 top
R46 NC R_0603_1608Metric 42.9260 -71.7550 0.0000 top
R47 200K R_0603_1608Metric 42.9260 -84.3280 0.0000 top
R48 NC R_0603_1608Metric 42.9260 -85.9790 0.0000 top
R49 200K R_0603_1608Metric 42.9260 -91.1860 0.0000 top
R50 NC R_0603_1608Metric 42.9260 -89.5350 0.0000 top
R51 200K R_0603_1608Metric 42.9260 -102.1080 0.0000 top
R52 NC R_0603_1608Metric 42.9260 -103.7590 0.0000 top
R53 100K R_0603_1608Metric 46.1010 -73.4060 0.0000 top
R54 0R R_0603_1608Metric 46.1010 -71.7550 0.0000 top
R55 100K R_0603_1608Metric 46.1010 -84.3280 0.0000 top
R56 0R R_0603_1608Metric 46.1010 -85.9790 0.0000 top
R57 100K R_0603_1608Metric 46.1010 -91.1860 0.0000 top
R58 0R R_0603_1608Metric 46.1010 -89.5350 0.0000 top
R59 100K R_0603_1608Metric 46.1010 -102.1080 0.0000 top
R60 0R R_0603_1608Metric 46.1010 -103.7590 0.0000 top
R61 47R R_0603_1608Metric 50.6730 -72.6440 -90.0000 top
R62 47R R_0603_1608Metric 50.6730 -85.0900 90.0000 top
R63 47R R_0603_1608Metric 50.6730 -90.4240 -90.0000 top
R64 47R R_0603_1608Metric 50.6730 -102.8700 90.0000 top
R65 4.7K R_0603_1608Metric 53.9750 -72.6440 -90.0000 top
R66 4.7K R_0603_1608Metric 53.9750 -85.0900 90.0000 top
R67 4.7K R_0603_1608Metric 53.9750 -90.4240 -90.0000 top
R68 4.7K R_0603_1608Metric 53.9750 -102.8700 90.0000 top
R69 10K R_0603_1608Metric 55.1180 -77.2160 180.0000 top
R70 10K R_0603_1608Metric 55.1180 -80.5180 180.0000 top
R71 10K R_0603_1608Metric 55.1180 -94.9960 180.0000 top
R72 10K R_0603_1608Metric 55.1180 -98.2980 180.0000 top
R73 10K C_0402_1005Metric 74.8030 -106.4260 90.0000 top
R74 10K C_0402_1005Metric 78.6130 -80.1370 90.0000 top
R75 10K C_0402_1005Metric 72.2630 -80.1370 90.0000 top
R76 0R R_0603_1608Metric 64.0080 -84.7090 90.0000 top
R77 NC R_0603_1608Metric 62.3570 -84.7090 90.0000 top
R78 5K1 R_0603_1608Metric 79.8830 -112.7760 -90.0000 top
R79 5K1 R_0603_1608Metric 78.2320 -112.7760 -90.0000 top
R80 5K1 R_0603_1608Metric 78.7400 -27.1780 90.0000 top
R81 5K1 R_0603_1608Metric 80.5180 -27.1780 90.0000 top
R82 1K R_0603_1608Metric 55.6260 -37.0840 90.0000 top
R83 1K R_0603_1608Metric 55.6260 -49.5300 -90.0000 top
R84 1K R_0603_1608Metric 55.6260 -54.8640 90.0000 top
R85 1K R_0603_1608Metric 55.6260 -67.3100 -90.0000 top
R86 1K R_0603_1608Metric 55.6260 -72.6440 90.0000 top
R87 1K R_0603_1608Metric 55.6260 -85.0900 -90.0000 top
R88 1K R_0603_1608Metric 55.6260 -90.4240 90.0000 top
R89 1K R_0603_1608Metric 55.6260 -102.8700 -90.0000 top
R90 1K R_0603_1608Metric 57.9120 -37.0840 -90.0000 top
R91 1K R_0603_1608Metric 57.9120 -49.5300 90.0000 top
R92 1K R_0603_1608Metric 57.9120 -54.8640 -90.0000 top
R93 1K R_0603_1608Metric 57.9120 -67.3100 90.0000 top
R94 1K R_0603_1608Metric 57.9120 -72.6440 -90.0000 top
R95 1K R_0603_1608Metric 57.9120 -85.0900 90.0000 top
R96 1K R_0603_1608Metric 57.9120 -90.4240 -90.0000 top
R97 1K R_0603_1608Metric 57.9120 -102.8700 90.0000 top
RN5 4.7K R_Array_Convex_4x0603 83.0870 -73.9140 180.0000 top
RN6 4.7K R_Array_Convex_4x0603 83.0870 -99.0600 180.0000 top
RN7 100R R_Array_Convex_4x0603 83.0870 -84.4550 180.0000 top
RN8 100R R_Array_Convex_4x0603 83.0870 -88.5190 180.0000 top
RN9 4.7K R_Array_Convex_4x0603 87.0060 -38.9890 0.0000 top
RN10 4.7K R_Array_Convex_4x0603 86.9950 -43.0530 0.0000 top
RN11 4.7K R_Array_Convex_4x0603 86.9950 -47.1170 0.0000 top
SW1 SW_DIP_x04 SW_DIP_SPSTx04_Slide_Copal_CHS-04B_W7.62mm_P1.27mm 60.4520 -28.8290 -90.0000 top
U1 TL084 SOIC-14_3.9x8.7mm_P1.27mm 49.0220 -43.3070 0.0000 top
U2 TL084 SOIC-14_3.9x8.7mm_P1.27mm 49.0220 -61.0870 0.0000 top
U3 TL084 SOIC-14_3.9x8.7mm_P1.27mm 49.0220 -78.8670 0.0000 top
U4 TL084 SOIC-14_3.9x8.7mm_P1.27mm 49.0220 -96.6470 0.0000 top
U5 STM32G030C LQFP-48_7x7mm_P0.5mm 66.1670 -45.8470 -90.0000 top
U6 XC6206P332MR SOT-23 73.9140 -36.7030 180.0000 top
U7 CH552T SSOP-20_4.4x6.5mm_P0.65mm 64.2620 -94.7420 -90.0000 top
U8 74HC165 SOIC-16_3.9x9.9mm_P1.27mm 75.4380 -86.4870 90.0000 top
U9 CH340N SOIC-8_3.9x4.9mm_P1.27mm 79.8830 -33.1470 180.0000 top
U10 SRV05-4 SOT-23-6 75.4380 -93.3379 -90.0000 top
U11 SRV05-4 SOT-23-6 75.4380 -79.6290 90.0000 top
U12 SGM3204 SOT-23-6 49.0220 -110.8710 180.0000 top
U13 XC6206P332MR SOT-23 73.1520 -100.7110 0.0000 top
## End

105253
HW/taiko-io/new_io.kicad_pcb Normal file

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,534 @@
{
"board": {
"3dviewports": [],
"design_settings": {
"defaults": {
"board_outline_line_width": 0.09999999999999999,
"copper_line_width": 0.19999999999999998,
"copper_text_italic": false,
"copper_text_size_h": 1.5,
"copper_text_size_v": 1.5,
"copper_text_thickness": 0.3,
"copper_text_upright": false,
"courtyard_line_width": 0.049999999999999996,
"dimension_precision": 4,
"dimension_units": 3,
"dimensions": {
"arrow_length": 1270000,
"extension_offset": 500000,
"keep_text_aligned": true,
"suppress_zeroes": false,
"text_position": 0,
"units_format": 1
},
"fab_line_width": 0.09999999999999999,
"fab_text_italic": false,
"fab_text_size_h": 1.0,
"fab_text_size_v": 1.0,
"fab_text_thickness": 0.15,
"fab_text_upright": false,
"other_line_width": 0.15,
"other_text_italic": false,
"other_text_size_h": 1.0,
"other_text_size_v": 1.0,
"other_text_thickness": 0.15,
"other_text_upright": false,
"pads": {
"drill": 0.762,
"height": 1.524,
"width": 1.524
},
"silk_line_width": 0.15,
"silk_text_italic": false,
"silk_text_size_h": 1.0,
"silk_text_size_v": 1.0,
"silk_text_thickness": 0.15,
"silk_text_upright": false,
"zones": {
"45_degree_only": false,
"min_clearance": 0.1905
}
},
"diff_pair_dimensions": [
{
"gap": 0.0,
"via_gap": 0.0,
"width": 0.0
}
],
"drc_exclusions": [],
"meta": {
"version": 2
},
"rule_severities": {
"annular_width": "error",
"clearance": "error",
"connection_width": "warning",
"copper_edge_clearance": "error",
"copper_sliver": "warning",
"courtyards_overlap": "error",
"diff_pair_gap_out_of_range": "error",
"diff_pair_uncoupled_length_too_long": "error",
"drill_out_of_range": "error",
"duplicate_footprints": "warning",
"extra_footprint": "warning",
"footprint": "error",
"footprint_type_mismatch": "error",
"hole_clearance": "error",
"hole_near_hole": "error",
"invalid_outline": "error",
"isolated_copper": "warning",
"item_on_disabled_layer": "error",
"items_not_allowed": "error",
"length_out_of_range": "error",
"lib_footprint_issues": "warning",
"lib_footprint_mismatch": "ignore",
"malformed_courtyard": "error",
"microvia_drill_out_of_range": "error",
"missing_courtyard": "ignore",
"missing_footprint": "warning",
"net_conflict": "warning",
"npth_inside_courtyard": "ignore",
"padstack": "error",
"pth_inside_courtyard": "ignore",
"shorting_items": "error",
"silk_edge_clearance": "ignore",
"silk_over_copper": "ignore",
"silk_overlap": "ignore",
"skew_out_of_range": "error",
"solder_mask_bridge": "error",
"starved_thermal": "error",
"text_height": "warning",
"text_thickness": "warning",
"through_hole_pad_without_hole": "error",
"too_many_vias": "error",
"track_dangling": "warning",
"track_width": "error",
"tracks_crossing": "error",
"unconnected_items": "error",
"unresolved_variable": "error",
"via_dangling": "warning",
"zones_intersect": "error"
},
"rules": {
"allow_blind_buried_vias": false,
"allow_microvias": false,
"max_error": 0.005,
"min_clearance": 0.0,
"min_connection": 0.0,
"min_copper_edge_clearance": 0.0,
"min_hole_clearance": 0.25,
"min_hole_to_hole": 0.25,
"min_microvia_diameter": 0.19999999999999998,
"min_microvia_drill": 0.09999999999999999,
"min_resolved_spokes": 2,
"min_silk_clearance": 0.0,
"min_text_height": 0.7999999999999999,
"min_text_thickness": 0.08,
"min_through_hole_diameter": 0.3,
"min_track_width": 0.19999999999999998,
"min_via_annular_width": 0.049999999999999996,
"min_via_diameter": 0.39999999999999997,
"solder_mask_clearance": 0.0,
"solder_mask_min_width": 0.0,
"solder_mask_to_copper_clearance": 0.0,
"use_height_for_length_calcs": true
},
"teardrop_options": [
{
"td_allow_use_two_tracks": true,
"td_curve_segcount": 5,
"td_on_pad_in_zone": false,
"td_onpadsmd": true,
"td_onroundshapesonly": false,
"td_ontrackend": false,
"td_onviapad": true
}
],
"teardrop_parameters": [
{
"td_curve_segcount": 0,
"td_height_ratio": 1.0,
"td_length_ratio": 0.5,
"td_maxheight": 2.0,
"td_maxlen": 1.0,
"td_target_name": "td_round_shape",
"td_width_to_size_filter_ratio": 0.9
},
{
"td_curve_segcount": 0,
"td_height_ratio": 1.0,
"td_length_ratio": 0.5,
"td_maxheight": 2.0,
"td_maxlen": 1.0,
"td_target_name": "td_rect_shape",
"td_width_to_size_filter_ratio": 0.9
},
{
"td_curve_segcount": 0,
"td_height_ratio": 1.0,
"td_length_ratio": 0.5,
"td_maxheight": 2.0,
"td_maxlen": 1.0,
"td_target_name": "td_track_end",
"td_width_to_size_filter_ratio": 0.9
}
],
"track_widths": [
0.0,
0.254,
0.381,
0.508,
0.762,
1.016,
1.27
],
"via_dimensions": [
{
"diameter": 0.0,
"drill": 0.0
},
{
"diameter": 0.6096,
"drill": 0.3048
},
{
"diameter": 0.8128,
"drill": 0.4064
}
],
"zones_allow_external_fillets": false,
"zones_use_no_outline": true
},
"layer_presets": [],
"viewports": []
},
"boards": [],
"cvpcb": {
"equivalence_files": []
},
"erc": {
"erc_exclusions": [],
"meta": {
"version": 0
},
"pin_map": [
[
0,
0,
0,
0,
0,
0,
1,
0,
0,
0,
0,
2
],
[
0,
2,
0,
1,
0,
0,
1,
0,
2,
2,
2,
2
],
[
0,
0,
0,
0,
0,
0,
1,
0,
1,
0,
1,
2
],
[
0,
1,
0,
0,
0,
0,
1,
1,
2,
1,
1,
2
],
[
0,
0,
0,
0,
0,
0,
1,
0,
0,
0,
0,
2
],
[
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
2
],
[
1,
1,
1,
1,
1,
0,
1,
1,
1,
1,
1,
2
],
[
0,
0,
0,
1,
0,
0,
1,
0,
0,
0,
0,
2
],
[
0,
2,
1,
2,
0,
0,
1,
0,
2,
2,
2,
2
],
[
0,
2,
0,
1,
0,
0,
1,
0,
2,
0,
0,
2
],
[
0,
2,
1,
1,
0,
0,
1,
0,
2,
0,
0,
2
],
[
2,
2,
2,
2,
2,
2,
2,
2,
2,
2,
2,
2
]
],
"rule_severities": {
"bus_definition_conflict": "error",
"bus_entry_needed": "error",
"bus_to_bus_conflict": "error",
"bus_to_net_conflict": "error",
"conflicting_netclasses": "error",
"different_unit_footprint": "error",
"different_unit_net": "error",
"duplicate_reference": "error",
"duplicate_sheet_names": "error",
"endpoint_off_grid": "warning",
"extra_units": "error",
"global_label_dangling": "warning",
"hier_label_mismatch": "error",
"label_dangling": "error",
"lib_symbol_issues": "warning",
"missing_bidi_pin": "warning",
"missing_input_pin": "warning",
"missing_power_pin": "error",
"missing_unit": "warning",
"multiple_net_names": "warning",
"net_not_bus_member": "warning",
"no_connect_connected": "warning",
"no_connect_dangling": "warning",
"pin_not_connected": "error",
"pin_not_driven": "error",
"pin_to_pin": "warning",
"power_pin_not_driven": "ignore",
"similar_labels": "warning",
"simulation_model_issue": "error",
"unannotated": "error",
"unit_value_mismatch": "error",
"unresolved_variable": "error",
"wire_dangling": "error"
}
},
"libraries": {
"pinned_footprint_libs": [],
"pinned_symbol_libs": []
},
"meta": {
"filename": "new_io.kicad_pro",
"version": 1
},
"net_settings": {
"classes": [
{
"bus_width": 12,
"clearance": 0.1778,
"diff_pair_gap": 0.25,
"diff_pair_via_gap": 0.25,
"diff_pair_width": 0.2,
"line_style": 0,
"microvia_diameter": 0.3,
"microvia_drill": 0.1,
"name": "Default",
"pcb_color": "rgba(0, 0, 0, 0.000)",
"schematic_color": "rgba(0, 0, 0, 0.000)",
"track_width": 0.254,
"via_diameter": 0.6096,
"via_drill": 0.3048,
"wire_width": 6
}
],
"meta": {
"version": 3
},
"net_colors": null,
"netclass_assignments": null,
"netclass_patterns": []
},
"pcbnew": {
"last_paths": {
"gencad": "",
"idf": "",
"netlist": "",
"specctra_dsn": "",
"step": "",
"vrml": ""
},
"page_layout_descr_file": ""
},
"schematic": {
"annotate_start_num": 0,
"drawing": {
"dashed_lines_dash_length_ratio": 12.0,
"dashed_lines_gap_length_ratio": 3.0,
"default_line_thickness": 6.0,
"default_text_size": 50.0,
"field_names": [],
"intersheets_ref_own_page": false,
"intersheets_ref_prefix": "",
"intersheets_ref_short": false,
"intersheets_ref_show": false,
"intersheets_ref_suffix": "",
"junction_size_choice": 3,
"label_size_ratio": 0.375,
"pin_symbol_size": 25.0,
"text_offset_ratio": 0.15
},
"legacy_lib_dir": "",
"legacy_lib_list": [],
"meta": {
"version": 1
},
"net_format_name": "",
"ngspice": {
"fix_include_paths": true,
"fix_passive_vals": false,
"meta": {
"version": 0
},
"model_mode": 0,
"workbook_filename": ""
},
"page_layout_descr_file": "",
"plot_directory": "",
"spice_adjust_passive_values": false,
"spice_current_sheet_as_root": false,
"spice_external_command": "spice \"%I\"",
"spice_model_current_sheet_as_root": true,
"spice_save_all_currents": false,
"spice_save_all_voltages": false,
"subpart_first_id": 65,
"subpart_id_separator": 0
},
"sheets": [
[
"a6aa5d11-2e46-4aee-ad99-9b7d46a989c1",
""
],
[
"9756da76-9072-42c4-9684-c484c3c1a68e",
"frontend"
],
[
"8c28bde5-632b-4f6a-a03f-bbd7b805253a",
"interface"
],
[
"59322ffe-8759-4986-b2b5-dae42374a58a",
"smapling"
],
[
"0acd3522-6a68-4f9a-ae0a-d0189b3bb895",
"usb mcu"
]
],
"text_variables": {}
}

View File

@ -0,0 +1,851 @@
(kicad_sch (version 20230121) (generator eeschema)
(uuid a6aa5d11-2e46-4aee-ad99-9b7d46a989c1)
(paper "A4")
(lib_symbols
)
(junction (at 114.3 38.1) (diameter 0) (color 0 0 0 0)
(uuid 273588b8-6d27-4eb5-9b1c-cebad119db23)
)
(junction (at 124.46 48.26) (diameter 0) (color 0 0 0 0)
(uuid 32d53876-4f70-45ab-8bf0-faccf109f555)
)
(junction (at 127 50.8) (diameter 0) (color 0 0 0 0)
(uuid 4f9d26a3-c62e-4a2c-8e4b-b3995207738c)
)
(junction (at 132.08 55.88) (diameter 0) (color 0 0 0 0)
(uuid 5f1b8d9b-156c-4a6c-afba-b75d0ef6c40a)
)
(junction (at 119.38 43.18) (diameter 0) (color 0 0 0 0)
(uuid 6356853c-0e06-4d4a-9b3e-d0ed5d598ab3)
)
(junction (at 116.84 40.64) (diameter 0) (color 0 0 0 0)
(uuid 9a6f8108-8020-4fe9-b556-142e1d5547d6)
)
(junction (at 121.92 45.72) (diameter 0) (color 0 0 0 0)
(uuid dfbb69d5-2454-4032-b1a5-08a3aa941b5d)
)
(junction (at 129.54 53.34) (diameter 0) (color 0 0 0 0)
(uuid fbfd863c-a85a-478f-b15e-f37961a5beb9)
)
(wire (pts (xy 81.28 40.64) (xy 86.36 40.64))
(stroke (width 0) (type default))
(uuid 020378ce-73ff-4975-811f-fea3307e4bc4)
)
(wire (pts (xy 52.07 45.72) (xy 57.15 45.72))
(stroke (width 0) (type default))
(uuid 026925b2-bbfa-4dd0-93b5-ad7ec6836f3b)
)
(wire (pts (xy 181.61 128.27) (xy 52.07 128.27))
(stroke (width 0) (type default))
(uuid 027d829d-8f05-4622-aef3-8c5f462cc13e)
)
(wire (pts (xy 129.54 53.34) (xy 134.62 53.34))
(stroke (width 0) (type default))
(uuid 0c0717c7-8ba9-44ee-9816-8d46f1477f4f)
)
(wire (pts (xy 129.54 53.34) (xy 129.54 93.98))
(stroke (width 0) (type default))
(uuid 0da18e49-f073-4237-b755-c1417edb69bb)
)
(wire (pts (xy 52.07 50.8) (xy 57.15 50.8))
(stroke (width 0) (type default))
(uuid 1663962b-a001-4203-9b6d-917ea15f7350)
)
(wire (pts (xy 179.07 48.26) (xy 162.56 48.26))
(stroke (width 0) (type default))
(uuid 1a6e4907-adeb-4034-ae37-a20dfad043d1)
)
(wire (pts (xy 81.28 38.1) (xy 86.36 38.1))
(stroke (width 0) (type default))
(uuid 246d71d4-2a23-49ee-8291-b6db49527216)
)
(wire (pts (xy 52.07 91.44) (xy 127 91.44))
(stroke (width 0) (type default))
(uuid 2cba17a4-e2a6-43b4-b726-160f7e8bf7fd)
)
(wire (pts (xy 52.07 43.18) (xy 57.15 43.18))
(stroke (width 0) (type default))
(uuid 2cf1de0d-63c9-4208-8a80-f67adca0ecd2)
)
(wire (pts (xy 111.76 43.18) (xy 119.38 43.18))
(stroke (width 0) (type default))
(uuid 2f215445-d3fb-43a6-b9ad-1212b43ee252)
)
(wire (pts (xy 52.07 68.58) (xy 95.25 68.58))
(stroke (width 0) (type default))
(uuid 31143b18-765b-4e9d-aa48-002040218960)
)
(wire (pts (xy 81.28 45.72) (xy 86.36 45.72))
(stroke (width 0) (type default))
(uuid 34253dd4-7751-4a13-b137-e2a0b470a6e6)
)
(wire (pts (xy 153.67 107.95) (xy 52.07 107.95))
(stroke (width 0) (type default))
(uuid 37722ab9-5bb7-410c-b388-6270f7deedad)
)
(wire (pts (xy 100.33 35.56) (xy 100.33 27.94))
(stroke (width 0) (type default))
(uuid 3a6b5641-75e1-4b08-8ca0-1dac1e472638)
)
(wire (pts (xy 52.07 115.57) (xy 168.91 115.57))
(stroke (width 0) (type default))
(uuid 3b741d3a-0c8c-4b0a-84ee-eb5685963110)
)
(wire (pts (xy 151.13 58.42) (xy 151.13 105.41))
(stroke (width 0) (type default))
(uuid 3bf857d2-5fb9-4fc6-92f5-b05d58da6f49)
)
(wire (pts (xy 52.07 63.5) (xy 143.51 63.5))
(stroke (width 0) (type default))
(uuid 3e891bb5-575d-4335-b1f2-283f82b6ffa1)
)
(wire (pts (xy 148.59 102.87) (xy 52.07 102.87))
(stroke (width 0) (type default))
(uuid 4296cc50-45d2-49be-84b1-2b10a6dcdfc3)
)
(wire (pts (xy 184.15 53.34) (xy 162.56 53.34))
(stroke (width 0) (type default))
(uuid 43c99c0b-7bb7-4b61-bf61-381a831edb4d)
)
(wire (pts (xy 52.07 71.12) (xy 97.79 71.12))
(stroke (width 0) (type default))
(uuid 44c6880d-f059-461a-9f28-341a892cac93)
)
(wire (pts (xy 132.08 96.52) (xy 132.08 55.88))
(stroke (width 0) (type default))
(uuid 45d702c1-7cd5-4e6c-9ae7-8dd7d33abb92)
)
(wire (pts (xy 181.61 50.8) (xy 181.61 128.27))
(stroke (width 0) (type default))
(uuid 46403b5c-1bba-4b37-8c57-38f253e5f0c2)
)
(wire (pts (xy 52.07 55.88) (xy 57.15 55.88))
(stroke (width 0) (type default))
(uuid 46958d95-e0d9-4c43-9b20-22a217e12185)
)
(wire (pts (xy 111.76 48.26) (xy 124.46 48.26))
(stroke (width 0) (type default))
(uuid 47a96ec5-4c75-4a5c-b907-84efeab1dd8a)
)
(wire (pts (xy 52.07 88.9) (xy 124.46 88.9))
(stroke (width 0) (type default))
(uuid 4913b3e4-c66d-48a2-891f-4f5a59d462da)
)
(wire (pts (xy 173.99 43.18) (xy 162.56 43.18))
(stroke (width 0) (type default))
(uuid 4b0da5b9-49b1-4ae8-bad8-1b7fff22f8da)
)
(wire (pts (xy 116.84 40.64) (xy 134.62 40.64))
(stroke (width 0) (type default))
(uuid 4dc5433c-e471-4412-9dd3-2f1440c0885d)
)
(wire (pts (xy 81.28 50.8) (xy 86.36 50.8))
(stroke (width 0) (type default))
(uuid 4f08b257-7e71-4d86-896a-2f896f473c24)
)
(wire (pts (xy 52.07 40.64) (xy 57.15 40.64))
(stroke (width 0) (type default))
(uuid 4f5fd58b-5d6a-49e7-808f-7955b3f21c30)
)
(wire (pts (xy 168.91 38.1) (xy 162.56 38.1))
(stroke (width 0) (type default))
(uuid 51d3951c-9b77-46be-bf10-51dbf8e4a6df)
)
(wire (pts (xy 81.28 55.88) (xy 86.36 55.88))
(stroke (width 0) (type default))
(uuid 53f5056e-9c98-4757-8302-bf85dd92a71f)
)
(wire (pts (xy 81.28 43.18) (xy 86.36 43.18))
(stroke (width 0) (type default))
(uuid 57b665d1-cb77-4e48-8059-2a6455c0d103)
)
(wire (pts (xy 52.07 130.81) (xy 184.15 130.81))
(stroke (width 0) (type default))
(uuid 61954140-9aa8-4476-807e-5c37fb1b4ae1)
)
(wire (pts (xy 184.15 130.81) (xy 184.15 53.34))
(stroke (width 0) (type default))
(uuid 65b70e19-56b4-47bb-add5-ff2ac522ea2d)
)
(wire (pts (xy 186.69 55.88) (xy 186.69 133.35))
(stroke (width 0) (type default))
(uuid 68398cc8-592b-4859-9bec-f65c04ed7c56)
)
(wire (pts (xy 81.28 53.34) (xy 86.36 53.34))
(stroke (width 0) (type default))
(uuid 6a3dfa27-87ca-47ff-ae65-b7364e31da6a)
)
(wire (pts (xy 152.4 27.94) (xy 152.4 35.56))
(stroke (width 0) (type default))
(uuid 6e8d2858-7c3d-4b13-94a6-db6f1aafa328)
)
(wire (pts (xy 171.45 40.64) (xy 171.45 118.11))
(stroke (width 0) (type default))
(uuid 6e9a3642-e5e1-42b2-8d19-b4d0e1c8870b)
)
(wire (pts (xy 111.76 50.8) (xy 127 50.8))
(stroke (width 0) (type default))
(uuid 6f325c82-8405-4084-a64c-ad2d321f1739)
)
(wire (pts (xy 52.07 120.65) (xy 173.99 120.65))
(stroke (width 0) (type default))
(uuid 7033328b-c0cf-484a-a8d3-6faa488dce5b)
)
(wire (pts (xy 52.07 66.04) (xy 146.05 66.04))
(stroke (width 0) (type default))
(uuid 709e3c68-9e08-4c4c-b28b-d7efc880a215)
)
(wire (pts (xy 186.69 133.35) (xy 52.07 133.35))
(stroke (width 0) (type default))
(uuid 71717f96-a092-419d-87c5-f9674cea11b3)
)
(wire (pts (xy 173.99 120.65) (xy 173.99 43.18))
(stroke (width 0) (type default))
(uuid 755c1e0f-0b4c-4473-bebb-95d1eaad45d2)
)
(wire (pts (xy 102.87 35.56) (xy 102.87 30.48))
(stroke (width 0) (type default))
(uuid 7647fa8c-43a2-4ee2-a056-4093697a0f10)
)
(wire (pts (xy 162.56 50.8) (xy 181.61 50.8))
(stroke (width 0) (type default))
(uuid 765ecaf3-ecad-43a6-9a89-32ea733e4b6d)
)
(wire (pts (xy 121.92 86.36) (xy 121.92 45.72))
(stroke (width 0) (type default))
(uuid 7c8db778-fcaa-4d44-9870-1d708cae90c6)
)
(wire (pts (xy 52.07 125.73) (xy 179.07 125.73))
(stroke (width 0) (type default))
(uuid 7ccfc864-8553-4c69-b242-993c824f7a09)
)
(wire (pts (xy 168.91 115.57) (xy 168.91 38.1))
(stroke (width 0) (type default))
(uuid 7db5e570-5e73-457a-9497-a40c721be3bb)
)
(wire (pts (xy 151.13 105.41) (xy 52.07 105.41))
(stroke (width 0) (type default))
(uuid 80f5e008-a589-446b-b6a3-c55a94f30c1a)
)
(wire (pts (xy 162.56 40.64) (xy 171.45 40.64))
(stroke (width 0) (type default))
(uuid 86c7334a-bf5f-4e4f-94b2-eba1a2aab67e)
)
(wire (pts (xy 143.51 58.42) (xy 143.51 63.5))
(stroke (width 0) (type default))
(uuid 8acc28fd-8dbf-4133-a001-97f86851727b)
)
(wire (pts (xy 52.07 86.36) (xy 121.92 86.36))
(stroke (width 0) (type default))
(uuid 8b7ee522-093a-4c76-a54a-ae20c284842c)
)
(wire (pts (xy 52.07 93.98) (xy 129.54 93.98))
(stroke (width 0) (type default))
(uuid 8f9e9180-c14a-41b4-bebd-2ab5508ef446)
)
(wire (pts (xy 124.46 48.26) (xy 134.62 48.26))
(stroke (width 0) (type default))
(uuid 90b70166-43f2-4a72-8279-eaa963b2ecb1)
)
(wire (pts (xy 52.07 81.28) (xy 116.84 81.28))
(stroke (width 0) (type default))
(uuid 91012a7b-95bb-43ef-b026-c71edf7de798)
)
(wire (pts (xy 52.07 118.11) (xy 171.45 118.11))
(stroke (width 0) (type default))
(uuid 911e29e0-86aa-4c54-a842-71c7e0783eea)
)
(wire (pts (xy 102.87 30.48) (xy 149.86 30.48))
(stroke (width 0) (type default))
(uuid 9128752e-e918-4831-b8f0-789a794b4a72)
)
(wire (pts (xy 52.07 83.82) (xy 119.38 83.82))
(stroke (width 0) (type default))
(uuid 926fb359-6aac-42f9-833b-9ebf1e6af396)
)
(wire (pts (xy 111.76 40.64) (xy 116.84 40.64))
(stroke (width 0) (type default))
(uuid 94e172b2-1ff6-4036-b8cb-3d3b55fd2c97)
)
(wire (pts (xy 127 50.8) (xy 134.62 50.8))
(stroke (width 0) (type default))
(uuid 97b34cbb-7586-49b8-a41f-7ca3497f0928)
)
(wire (pts (xy 52.07 38.1) (xy 57.15 38.1))
(stroke (width 0) (type default))
(uuid 97ec201c-c5a5-4fa2-83dd-a2fdf713c07b)
)
(wire (pts (xy 162.56 45.72) (xy 176.53 45.72))
(stroke (width 0) (type default))
(uuid 98837ad7-2a6d-4fd6-b131-192af3116d84)
)
(wire (pts (xy 176.53 123.19) (xy 52.07 123.19))
(stroke (width 0) (type default))
(uuid 98a1f4b3-7f42-4857-9a88-198426dd3fb6)
)
(wire (pts (xy 114.3 38.1) (xy 134.62 38.1))
(stroke (width 0) (type default))
(uuid 9997e77b-775e-4d4d-b7a7-6c82b6d88704)
)
(wire (pts (xy 111.76 38.1) (xy 114.3 38.1))
(stroke (width 0) (type default))
(uuid a40b32d2-4e53-4a34-9571-11f8477bed02)
)
(wire (pts (xy 52.07 53.34) (xy 57.15 53.34))
(stroke (width 0) (type default))
(uuid a89d4576-ec20-46c7-9254-1fc932cf24a8)
)
(wire (pts (xy 95.25 58.42) (xy 95.25 68.58))
(stroke (width 0) (type default))
(uuid a98a95d3-116e-43fe-9742-593d8b8ea781)
)
(wire (pts (xy 121.92 45.72) (xy 134.62 45.72))
(stroke (width 0) (type default))
(uuid aa69fb69-51b3-4a63-84c0-7ccfaed23dab)
)
(wire (pts (xy 132.08 55.88) (xy 134.62 55.88))
(stroke (width 0) (type default))
(uuid aec5ffdc-4ac1-46e4-aaab-99558957c1cb)
)
(wire (pts (xy 176.53 45.72) (xy 176.53 123.19))
(stroke (width 0) (type default))
(uuid b219107d-076f-4937-a4e5-5cc4f25e223d)
)
(wire (pts (xy 116.84 81.28) (xy 116.84 40.64))
(stroke (width 0) (type default))
(uuid b45eb404-cb7d-4b33-8671-3f858139fcc4)
)
(wire (pts (xy 52.07 78.74) (xy 114.3 78.74))
(stroke (width 0) (type default))
(uuid b6176568-ad90-4616-b6e0-2aeab2fb0283)
)
(wire (pts (xy 127 91.44) (xy 127 50.8))
(stroke (width 0) (type default))
(uuid bc9669fe-b914-4321-bdc9-017a2b6b6032)
)
(wire (pts (xy 111.76 45.72) (xy 121.92 45.72))
(stroke (width 0) (type default))
(uuid bf4ab202-9124-43f7-b32a-77a6a6829ab8)
)
(wire (pts (xy 124.46 88.9) (xy 124.46 48.26))
(stroke (width 0) (type default))
(uuid c43c2d41-63cf-43ec-b5ac-8ec4a077ca95)
)
(wire (pts (xy 146.05 58.42) (xy 146.05 66.04))
(stroke (width 0) (type default))
(uuid c4d02230-ba8d-4367-a6ea-0085c2e797f7)
)
(wire (pts (xy 97.79 58.42) (xy 97.79 71.12))
(stroke (width 0) (type default))
(uuid c8c02ebd-4682-4e0f-a33a-34a0dda03b60)
)
(wire (pts (xy 111.76 55.88) (xy 132.08 55.88))
(stroke (width 0) (type default))
(uuid ccd3e8f8-fd19-45fb-abb5-10b3e65fd122)
)
(wire (pts (xy 114.3 78.74) (xy 114.3 38.1))
(stroke (width 0) (type default))
(uuid cfc15ae8-2116-4f85-9d53-51992fb28a3f)
)
(wire (pts (xy 101.6 100.33) (xy 52.07 100.33))
(stroke (width 0) (type default))
(uuid dbd33cdd-836a-4f6b-86d5-87ae9967c864)
)
(wire (pts (xy 179.07 125.73) (xy 179.07 48.26))
(stroke (width 0) (type default))
(uuid e545fbb4-45ef-4d09-b01e-63540efd7747)
)
(wire (pts (xy 100.33 27.94) (xy 152.4 27.94))
(stroke (width 0) (type default))
(uuid e5ef2e1f-87f6-426b-8df5-b3cbeb036947)
)
(wire (pts (xy 81.28 48.26) (xy 86.36 48.26))
(stroke (width 0) (type default))
(uuid e76c8f82-4217-4ea8-8d48-822751438e13)
)
(wire (pts (xy 52.07 96.52) (xy 132.08 96.52))
(stroke (width 0) (type default))
(uuid e9decad4-e946-4d85-ad30-db8bbbdf71a7)
)
(wire (pts (xy 149.86 30.48) (xy 149.86 35.56))
(stroke (width 0) (type default))
(uuid ebcf8900-7116-45df-9988-ac50e39745e6)
)
(wire (pts (xy 119.38 83.82) (xy 119.38 43.18))
(stroke (width 0) (type default))
(uuid ec3af6a8-7096-4e46-9ded-967dc637a7f2)
)
(wire (pts (xy 162.56 55.88) (xy 186.69 55.88))
(stroke (width 0) (type default))
(uuid f01fdc39-5de5-443a-b2f8-eb67d2674aa5)
)
(wire (pts (xy 119.38 43.18) (xy 134.62 43.18))
(stroke (width 0) (type default))
(uuid f1eb024d-e7f7-4ceb-a867-5bbee58bccbe)
)
(wire (pts (xy 153.67 58.42) (xy 153.67 107.95))
(stroke (width 0) (type default))
(uuid f311f8f5-483b-430d-bf87-625e2c9ae6ea)
)
(wire (pts (xy 52.07 48.26) (xy 57.15 48.26))
(stroke (width 0) (type default))
(uuid f5ba42fb-549e-4b57-b45f-a083d525c752)
)
(wire (pts (xy 148.59 58.42) (xy 148.59 102.87))
(stroke (width 0) (type default))
(uuid f708a443-11ef-494c-8374-d57cb916598d)
)
(wire (pts (xy 101.6 58.42) (xy 101.6 100.33))
(stroke (width 0) (type default))
(uuid f8834582-db32-4256-96b9-74f35d3c1cf9)
)
(wire (pts (xy 111.76 53.34) (xy 129.54 53.34))
(stroke (width 0) (type default))
(uuid fbb397c3-223b-4d4f-b008-6ab4d2474431)
)
(sheet (at 134.62 35.56) (size 27.94 22.86)
(stroke (width 0.1524) (type solid))
(fill (color 240 240 240 1.0000))
(uuid 0acd3522-6a68-4f9a-ae0a-d0189b3bb895)
(property "Sheetname" "usb mcu" (at 134.62 35.56 0)
(effects (font (size 1.27 1.27)) (justify left bottom))
)
(property "Sheetfile" "usb_mcu.kicad_sch" (at 134.62 59.0046 0)
(effects (font (size 1.27 1.27)) (justify left top) hide)
)
(pin "IN1" input (at 134.62 38.1 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 2b87e51c-1772-4278-bf56-9f0131eeb9be)
)
(pin "IN2" input (at 134.62 40.64 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 3f173942-bda7-4409-95dd-e2b6bb9ab7ab)
)
(pin "IN3" input (at 134.62 43.18 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 819f165d-65fb-4ec0-8081-a640f570f65d)
)
(pin "IN4" input (at 134.62 45.72 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid b20d563b-f2be-4861-8001-826ed0469b9f)
)
(pin "IN5" input (at 134.62 48.26 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid f56f5a09-4a69-45e4-bc92-0247c66b8392)
)
(pin "IN6" input (at 134.62 50.8 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 979d3417-0a35-48e5-85c0-48efe0ce2b58)
)
(pin "IN7" input (at 134.62 53.34 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 273746ce-450b-445e-8700-d734ef14d04a)
)
(pin "IN8" input (at 134.62 55.88 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 5c45d5f7-2a23-4409-bd31-ed86d865d6dd)
)
(pin "DIN1" input (at 162.56 38.1 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 6c2ce73c-b45f-4ebc-b43a-a12dbf9e2998)
)
(pin "DIN8" input (at 162.56 55.88 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 75098abc-1e70-45fc-886b-77b10e0dbb75)
)
(pin "DIN7" input (at 162.56 53.34 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 23d10448-fe0b-4111-b490-60d570fdd529)
)
(pin "DIN5" input (at 162.56 48.26 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 25293715-a5b7-4079-9cb0-f7401bd583bf)
)
(pin "DIN3" input (at 162.56 43.18 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid a59ee6db-9ccb-4837-bb0a-8004699dfbbb)
)
(pin "DIN2" input (at 162.56 40.64 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid f1598b97-74c1-4e5b-aca1-71473ebeda43)
)
(pin "DIN6" input (at 162.56 50.8 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid e86a7eb1-9cb3-43c7-9ff0-e07b538f7e22)
)
(pin "DIN4" input (at 162.56 45.72 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 2f3bdfc0-7200-4839-b3ee-e44e16e12911)
)
(pin "USB_DP" bidirectional (at 143.51 58.42 270)
(effects (font (size 1.27 1.27)) (justify left))
(uuid dd01946c-7be1-4bdb-b550-93130ea5764b)
)
(pin "USB_DN" bidirectional (at 146.05 58.42 270)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 100b9a5e-159a-444f-9aec-a43ba2f5e162)
)
(pin "STA1" output (at 148.59 58.42 270)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 9115bd13-8d4a-4f0f-ab99-dcd5a50af59d)
)
(pin "STA2" output (at 151.13 58.42 270)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 6a88cdd9-2e14-4a45-a644-ac3e24f0f991)
)
(pin "RXD" input (at 149.86 35.56 90)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 5c79088c-b561-433a-a767-97b12f7d2b64)
)
(pin "TXD" output (at 152.4 35.56 90)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 49906ce5-dd16-4ed7-95f6-ec616afb6b99)
)
(pin "STA3" output (at 153.67 58.42 270)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 6cbe1e16-1cee-40d2-a2ae-362ef47d5bed)
)
(instances
(project "new_io"
(path "/a6aa5d11-2e46-4aee-ad99-9b7d46a989c1" (page "5"))
)
)
)
(sheet (at 86.36 35.56) (size 25.4 22.86)
(stroke (width 0.1524) (type solid))
(fill (color 240 240 240 1.0000))
(uuid 59322ffe-8759-4986-b2b5-dae42374a58a)
(property "Sheetname" "smapling" (at 86.36 35.56 0)
(effects (font (size 1.27 1.27)) (justify left bottom))
)
(property "Sheetfile" "smapling.kicad_sch" (at 86.36 59.0046 0)
(effects (font (size 1.27 1.27)) (justify left top) hide)
)
(pin "IN7" input (at 86.36 53.34 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 5dbfe041-c380-4b55-aa1f-5c072c050c0c)
)
(pin "IN8" input (at 86.36 55.88 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 2c462afd-3825-4af0-8d81-130c1fcafd98)
)
(pin "IN5" input (at 86.36 48.26 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid ee6a2018-1f75-4cf3-b297-e73521f58c1e)
)
(pin "IN6" input (at 86.36 50.8 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid d0002365-6b1a-4955-87ee-d6f7ec299114)
)
(pin "IN1" input (at 86.36 38.1 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 9a17cc5f-4848-4318-ac69-ac8b3aa412ee)
)
(pin "IN3" input (at 86.36 43.18 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid f991ad40-7807-4a09-93e2-5adcef431f87)
)
(pin "IN4" input (at 86.36 45.72 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 4fe75eea-7fdf-417e-921d-455062fd35e8)
)
(pin "IN2" input (at 86.36 40.64 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 606b62c7-603e-4323-bbc5-eee919084bdd)
)
(pin "OUT7" output (at 111.76 53.34 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid d96d248b-2904-40a6-a113-088e42707bc6)
)
(pin "OUT8" output (at 111.76 55.88 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 94d0dc7a-2f72-4862-bb97-9c8c39f10b42)
)
(pin "OUT6" output (at 111.76 50.8 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 405f2b17-55ac-480f-960a-8f6e511e227b)
)
(pin "OUT1" output (at 111.76 38.1 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 6913ed0b-0494-47d5-a60e-298b99dee7f2)
)
(pin "OUT5" output (at 111.76 48.26 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid a9ce0c7b-ea62-4acc-9e6f-bbac308dca48)
)
(pin "OUT2" output (at 111.76 40.64 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 07d825fe-949c-4bdc-bfc8-7f31a553fe26)
)
(pin "OUT4" output (at 111.76 45.72 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid b68d1596-6fa1-4778-844e-a596c8de49fc)
)
(pin "OUT3" output (at 111.76 43.18 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 49bde584-a6b4-4218-8f3e-83f65952668d)
)
(pin "RXD" input (at 100.33 35.56 90)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 0c75189d-4439-4903-9f0b-6bf37e75bb82)
)
(pin "TXD" output (at 102.87 35.56 90)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 00ade08a-5b0e-4250-a387-39bf3a43bb45)
)
(pin "USB_DP" bidirectional (at 95.25 58.42 270)
(effects (font (size 1.27 1.27)) (justify left))
(uuid e15dede9-11ef-45ca-bb81-d0d9e0225590)
)
(pin "USB_DN" bidirectional (at 97.79 58.42 270)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 709e0d8a-5c41-4599-9bf4-dcb80e5c3727)
)
(pin "STA1" output (at 101.6 58.42 270)
(effects (font (size 1.27 1.27)) (justify left))
(uuid c2149c6b-1159-435d-9809-c07e9889aa4e)
)
(instances
(project "new_io"
(path "/a6aa5d11-2e46-4aee-ad99-9b7d46a989c1" (page "4"))
)
)
)
(sheet (at 39.37 35.56) (size 12.7 102.87)
(stroke (width 0.1524) (type solid))
(fill (color 240 240 240 1.0000))
(uuid 8c28bde5-632b-4f6a-a03f-bbd7b805253a)
(property "Sheetname" "interface" (at 39.37 35.56 0)
(effects (font (size 1.27 1.27)) (justify left bottom))
)
(property "Sheetfile" "interface.kicad_sch" (at 39.37 125.0446 0)
(effects (font (size 1.27 1.27)) (justify left top) hide)
)
(pin "IN1" output (at 52.07 38.1 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 02bb913e-b3e9-412d-ba63-362e9c8d8e52)
)
(pin "IN6" output (at 52.07 50.8 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 4eb554c2-8a46-4786-9fb0-7c7b8aba3ee8)
)
(pin "IN3" output (at 52.07 43.18 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 4dc898aa-fe48-449a-ae6f-5bb2159b93fd)
)
(pin "IN2" output (at 52.07 40.64 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 4a95963f-f445-4be3-b443-f97ff9ff8f2f)
)
(pin "IN8" output (at 52.07 55.88 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid e1cb7ca7-a94c-44d1-9fbc-6d73626ab764)
)
(pin "IN7" output (at 52.07 53.34 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 7058b89e-f342-4678-b607-7f681d5cf49b)
)
(pin "IN4" output (at 52.07 45.72 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid d2643547-e4d5-4230-971b-0177ac673517)
)
(pin "IN5" output (at 52.07 48.26 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 2f61ec93-168f-495e-946d-7199fc902aab)
)
(pin "USB1_DN" bidirectional (at 52.07 66.04 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 68c71f94-de5a-4102-bc3d-9a40d7999f6d)
)
(pin "USB1_DP" bidirectional (at 52.07 63.5 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 5029b86a-0dbc-4063-ab00-dee760ff5b20)
)
(pin "USB2_DP" bidirectional (at 52.07 68.58 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 6f9cab33-4816-4dbc-9a65-badc07bb3fc2)
)
(pin "USB2_DN" bidirectional (at 52.07 71.12 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid b3e1cc2b-9fa2-435b-b141-5c4d81081ff4)
)
(pin "LED1" input (at 52.07 78.74 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 8506d474-d174-4c70-b010-e0139c18c22d)
)
(pin "LED2" input (at 52.07 81.28 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid b7146c6e-9c98-462a-bd58-5bc5669385fe)
)
(pin "LED3" input (at 52.07 83.82 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 1868d8ba-296b-46cd-a99d-544ef651bd12)
)
(pin "LED4" input (at 52.07 86.36 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid e51b0d5f-cf2b-4ee2-b536-4ea8b4f7f0f1)
)
(pin "LED5" input (at 52.07 88.9 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 39108d22-c5c7-41f0-9444-691a0e07f95f)
)
(pin "LED6" input (at 52.07 91.44 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 6b7b01a8-765d-4c55-ba02-1b87fc092870)
)
(pin "LED7" input (at 52.07 93.98 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 3a1a7c29-22cb-40ec-aab4-cd67249a7463)
)
(pin "LED8" input (at 52.07 96.52 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid b86c5fb1-ab44-4a78-9fa2-f05e96a9631a)
)
(pin "DIN6" output (at 52.07 128.27 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 06752c7c-f8ec-4d1f-b027-edcc48ceb10e)
)
(pin "DIN7" output (at 52.07 130.81 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 2eb0670b-79a9-4917-a8c4-a68342a35894)
)
(pin "DIN8" output (at 52.07 133.35 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid fd882dea-735e-451e-b210-5cb5995bcdfe)
)
(pin "DIN5" output (at 52.07 125.73 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid d725fc2c-ce32-4337-94e8-19a488c53e43)
)
(pin "DIN3" output (at 52.07 120.65 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 4b3fc4a1-f1f7-415d-9054-930702e43457)
)
(pin "DIN4" output (at 52.07 123.19 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid e0845e9b-b174-4240-8d30-d1901f3923a5)
)
(pin "DIN1" output (at 52.07 115.57 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid d72303e7-7375-4eda-afa5-cf693c60a1b8)
)
(pin "DIN2" output (at 52.07 118.11 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid c1ce2d2d-438a-4f66-a4e5-986b743adfe1)
)
(pin "STA1" input (at 52.07 100.33 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 483e6d60-c508-43da-be6f-8cfd24795b99)
)
(pin "STA3" input (at 52.07 105.41 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid ea5587bd-8417-4ac0-ad81-55621dd944cc)
)
(pin "STA2" input (at 52.07 102.87 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid e6825137-b483-401e-b0df-cb25b44ca87b)
)
(pin "STA4" input (at 52.07 107.95 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid f00ddd4a-e2d6-4a4c-9077-1bb23b718849)
)
(instances
(project "new_io"
(path "/a6aa5d11-2e46-4aee-ad99-9b7d46a989c1" (page "4"))
)
)
)
(sheet (at 57.15 35.56) (size 24.13 22.86)
(stroke (width 0.1524) (type solid))
(fill (color 240 240 240 1.0000))
(uuid 9756da76-9072-42c4-9684-c484c3c1a68e)
(property "Sheetname" "frontend" (at 57.15 35.56 0)
(effects (font (size 1.27 1.27)) (justify left bottom))
)
(property "Sheetfile" "frontend.kicad_sch" (at 57.15 59.0046 0)
(effects (font (size 1.27 1.27)) (justify left top) hide)
)
(pin "IN4" input (at 57.15 45.72 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 48a4143a-6e06-4759-8b62-bbfac5d75c83)
)
(pin "IN2" input (at 57.15 40.64 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid a11f1f5e-9080-4b06-929b-079b3f3cdfea)
)
(pin "IN3" input (at 57.15 43.18 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid e866233d-91a9-477d-ae72-e00b5007c089)
)
(pin "OPA8" output (at 81.28 55.88 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid caa0a283-a5a3-4532-8639-74b68f81ea9a)
)
(pin "OPA7" output (at 81.28 53.34 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 8925d691-8f64-44d9-a46a-cb7a4d5d1f71)
)
(pin "OPA5" output (at 81.28 48.26 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid fc014ca2-5489-48f8-9cc6-800e6cf3beab)
)
(pin "OPA6" output (at 81.28 50.8 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid c94197f9-9c6b-4128-8f77-3ee69c6c0f92)
)
(pin "IN1" input (at 57.15 38.1 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid e3265951-9c84-4b3b-9a53-d194b17b7578)
)
(pin "IN8" input (at 57.15 55.88 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid a625a2ec-194f-417b-ad5b-5be8386e4e26)
)
(pin "OPA4" output (at 81.28 45.72 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 6afa3fba-bc8c-46b7-8a7d-4b1ae71ddd89)
)
(pin "IN7" input (at 57.15 53.34 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid 643d9bd4-47f0-4b80-a7e0-65995bdf9d7e)
)
(pin "IN6" input (at 57.15 50.8 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid acb8f459-9f6f-4f5a-95bb-0aa618288c58)
)
(pin "OPA3" output (at 81.28 43.18 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid fbd4a4b8-70d3-44e1-9485-23d39280d266)
)
(pin "OPA2" output (at 81.28 40.64 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 1a006dbe-a786-45bf-b24c-ec88b51611f9)
)
(pin "IN5" input (at 57.15 48.26 180)
(effects (font (size 1.27 1.27)) (justify left))
(uuid bb19da3a-b6a7-4df3-9d2e-afae27ee6c89)
)
(pin "OPA1" output (at 81.28 38.1 0)
(effects (font (size 1.27 1.27)) (justify right))
(uuid 25985267-766a-4f55-b8ec-4a2ca10c8075)
)
(instances
(project "new_io"
(path "/a6aa5d11-2e46-4aee-ad99-9b7d46a989c1" (page "2"))
)
)
)
(sheet_instances
(path "/" (page "1"))
)
)

BIN
HW/taiko-io/new_io.pdf Normal file

Binary file not shown.

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,127 @@
{
"Header": {
"GenerationSoftware": {
"Vendor": "KiCad",
"Application": "Pcbnew",
"Version": "(7.0.0)"
},
"CreationDate": "2023-03-15T14:34:35+08:00"
},
"GeneralSpecs": {
"ProjectId": {
"Name": "new_io",
"GUID": "6e65775f-696f-42e6-9b69-6361645f7063",
"Revision": "rev?"
},
"Size": {
"X": 85.1,
"Y": 100.1
},
"LayerNumber": 2,
"BoardThickness": 1.6,
"Finish": "None"
},
"DesignRules": [
{
"Layers": "Outer",
"PadToPad": 0.1778,
"PadToTrack": 0.1778,
"TrackToTrack": 0.1778,
"MinLineWidth": 0.254,
"TrackToRegion": 0.1905,
"RegionToRegion": 0.1905
}
],
"FilesAttributes": [
{
"Path": "new_io-F_Cu.gbr",
"FileFunction": "Copper,L1,Top",
"FilePolarity": "Positive"
},
{
"Path": "new_io-B_Cu.gbr",
"FileFunction": "Copper,L2,Bot",
"FilePolarity": "Positive"
},
{
"Path": "new_io-F_Paste.gbr",
"FileFunction": "SolderPaste,Top",
"FilePolarity": "Positive"
},
{
"Path": "new_io-B_Paste.gbr",
"FileFunction": "SolderPaste,Bot",
"FilePolarity": "Positive"
},
{
"Path": "new_io-F_Silkscreen.gbr",
"FileFunction": "Legend,Top",
"FilePolarity": "Positive"
},
{
"Path": "new_io-B_Silkscreen.gbr",
"FileFunction": "Legend,Bot",
"FilePolarity": "Positive"
},
{
"Path": "new_io-F_Mask.gbr",
"FileFunction": "SolderMask,Top",
"FilePolarity": "Negative"
},
{
"Path": "new_io-B_Mask.gbr",
"FileFunction": "SolderMask,Bot",
"FilePolarity": "Negative"
},
{
"Path": "new_io-Edge_Cuts.gbr",
"FileFunction": "Profile",
"FilePolarity": "Positive"
}
],
"MaterialStackup": [
{
"Type": "Legend",
"Name": "Top Silk Screen"
},
{
"Type": "SolderPaste",
"Name": "Top Solder Paste"
},
{
"Type": "SolderMask",
"Thickness": 0.01,
"Name": "Top Solder Mask"
},
{
"Type": "Copper",
"Thickness": 0.035,
"Name": "F.Cu"
},
{
"Type": "Dielectric",
"Thickness": 1.51,
"Material": "FR4",
"Name": "F.Cu/B.Cu",
"Notes": "Type: dielectric layer 1 (from F.Cu to B.Cu)"
},
{
"Type": "Copper",
"Thickness": 0.035,
"Name": "B.Cu"
},
{
"Type": "SolderMask",
"Thickness": 0.01,
"Name": "Bottom Solder Mask"
},
{
"Type": "SolderPaste",
"Name": "Bottom Solder Paste"
},
{
"Type": "Legend",
"Name": "Bottom Silk Screen"
}
]
}

File diff suppressed because it is too large Load Diff

55
QT-APP/.gitignore vendored Normal file
View File

@ -0,0 +1,55 @@
# C++ objects and libs
*.slo
*.lo
*.o
*.a
*.la
*.lai
*.so
*.so.*
*.dll
*.dylib
*.exe
# Qt-es
object_script.*.Release
object_script.*.Debug
*_plugin_import.cpp
/.qmake.cache
/.qmake.stash
*.pro.user
*.pro.user.*
*.qbs.user
*.qbs.user.*
*.moc
moc_*.cpp
moc_*.h
qrc_*.cpp
ui_*.h
*.qmlc
*.jsc
Makefile*
*build-*
*.qm
*.prl
# Qt unit tests
target_wrapper.*
# QtCreator
*.autosave
# QtCreator Qml
*.qmlproject.user
*.qmlproject.user.*
# QtCreator CMake
CMakeLists.txt.user*
# QtCreator 4.8< compilation database
compile_commands.json
# QtCreator local machine specific files for imported projects
*creator.user*
*_qmlcache.qrc

View File

@ -0,0 +1,47 @@
QT += core gui
QT += serialport
greaterThan(QT_MAJOR_VERSION, 4): QT += widgets
CONFIG += c++11
# The following define makes your compiler emit warnings if you use
# any Qt feature that has been marked deprecated (the exact warnings
# depend on your compiler). Please consult the documentation of the
# deprecated API in order to know how to port your code away from it.
DEFINES += QT_DEPRECATED_WARNINGS
# You can also make your code fail to compile if it uses deprecated APIs.
# In order to do so, uncomment the following line.
# You can also select to disable deprecated APIs only up to a certain version of Qt.
#DEFINES += QT_DISABLE_DEPRECATED_BEFORE=0x060000 # disables all the APIs deprecated before Qt 6.0.0
SOURCES += \
clickedcombobox.cpp \
main.cpp \
mainwindow.cpp
HEADERS += \
clickedcombobox.h \
mainwindow.h
FORMS += \
mainwindow.ui
# Default rules for deployment.
qnx: target.path = /tmp/$${TARGET}/bin
else: unix:!android: target.path = /opt/$${TARGET}/bin
!isEmpty(target.path): INSTALLS += target
RESOURCES += \
images.qrc
RC_ICONS = icon.ico
VERSION = 0.0.0.2
QMAKE_TARGET_PRODUCT = Taiko IO Setting
QMAKE_TARGET_COPYRIGHT = Analog Dragon
TARGET = Taiko_IO_Setting

View File

@ -0,0 +1,20 @@
#include "clickedcombobox.h"
ClickedComboBox::ClickedComboBox(QWidget *parent):QComboBox(parent)
{
}
ClickedComboBox::~ClickedComboBox()
{
}
void ClickedComboBox::mousePressEvent(QMouseEvent *event)
{
if(event->button() == Qt::LeftButton)
{
emit clicked(true);
}
QComboBox::mousePressEvent(event);
}

View File

@ -0,0 +1,21 @@
#ifndef CLICKEDCOMBOBOX_H
#define CLICKEDCOMBOBOX_H
#include <QComboBox>
#include <QMouseEvent>
class ClickedComboBox : public QComboBox
{
Q_OBJECT
public:
explicit ClickedComboBox(QWidget *parent);
~ClickedComboBox();
protected:
void mousePressEvent(QMouseEvent *event);
signals:
void clicked(bool);
};
#endif // CLICKEDCOMBOBOX_H

Binary file not shown.

After

Width:  |  Height:  |  Size: 1.0 MiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 142 KiB

View File

@ -0,0 +1,9 @@
<RCC>
<qresource prefix="/new/prefix1">
<file>images/down.png</file>
<file>images/save.png</file>
<file>images/up.png</file>
<file>images/tk.png</file>
<file>images/icon.png</file>
</qresource>
</RCC>

Binary file not shown.

After

Width:  |  Height:  |  Size: 3.6 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 142 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 1.0 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 18 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 3.6 KiB

View File

@ -0,0 +1,13 @@
#include "mainwindow.h"
#include <QApplication>
int main(int argc, char *argv[])
{
QApplication a(argc, argv);
MainWindow w;
w.show();
return a.exec();
}

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,140 @@
#ifndef MAINWINDOW_H
#define MAINWINDOW_H
#include <QMainWindow>
#include <QSerialPort>
#include <QSerialPortInfo>
#include "QIntValidator"
#include <QLineEdit>
#include <QCheckBox>
#include <QPushButton>
#include <QSlider>
#include <QTimer>
#include <QThread>
#include <QList>
#include <QLocale>
#define CMD_FAULT 0x10
#define CMD_ACK 0x20
#define CMD_SYS_RESET 0xA0
#define CMD_SYS_SAVE 0xA1
#define CMD_ACK_DEF_SET 0xB0
#define CMD_ACK_SAVE_SET 0xB1
#define CMD_ACK_NOW_SET 0xB2
#define CMD_SEND_SET 0xC0
#define CMD_CALL_DEF 0xC1
#define CMD_DEBUG_LOG 0xD1
class Serial;
QT_BEGIN_NAMESPACE
namespace Ui { class MainWindow; }
QT_END_NAMESPACE
class MainWindow : public QMainWindow
{
Q_OBJECT
public:
MainWindow(QWidget *parent = nullptr);
~MainWindow();
void ScanCom(void);
void EnableButton(bool state);
void PutUiData(quint8 cmd,QByteArray array);
QByteArray GetUiData(void);
void DispResult(bool state);
void ClearResult(void);
bool CheckCom(void);
bool CheckUIData(void);
QList<QLineEdit *> _id_list;
QList<QLineEdit *> _id_tg_list;
QList<QSlider *> _id_tg_slider_list;
int select = -1;
QTimer *selall_t;
QTimer *waitdown_t;
bool TextSetFlag1 = false;
bool DataOK = false;
Serial *serial;
private:
Ui::MainWindow *ui;
protected:
virtual bool eventFilter(QObject *watched, QEvent *event);
private slots:
void on_BT_UP_clicked(bool checked);
void on_BT_DN_clicked(bool checked);
void on_BT_SV_clicked(bool checked);
void on_BT_ClearMul_clicked(bool checked);
void on_pushButton_2_clicked();
void on_pushButton_clicked();
};
class Serial : public QObject
{
Q_OBJECT
public:
Serial();
~Serial(){}
void SerialPortConnect(bool state);
void SerialSend(QString text, bool state);
void AddToList(quint8 cmd,QByteArray array);
void SerialTimer(void);
quint16 CRCCheck(QByteArray data);
bool SerialStart(QString text);
void SendFream(void);
quint8 DataCalc(quint8 cmd,QByteArray array);
void SerialAbrot(void);
quint8 DataLen(quint8 cmd);
struct SendPack_DEF{
QByteArray Data;
int count;
int times;
};
QSerialPort* _serial;
bool SerialState = false;
QList<SendPack_DEF> SendList;
QTimer* _sendTimer;
QString PortName;
QByteArray RecData;
signals:
void serialCplt(bool state);
void serialMessage(QString text);
void ackToUi(quint8 cmd,QByteArray array);
void serialData(quint8 cmd,QByteArray array);
public slots:
void serialRead();
};
#endif // MAINWINDOW_H

File diff suppressed because it is too large Load Diff

53
QT-APP/README.md Normal file
View File

@ -0,0 +1,53 @@
# 上位机
QTWIN64
使用串口配置采样单片机的参数
[采样单片机软件](../Sampling-MCU/)
<br/><br/>
## 使用说明
### 软件界面
A-鼓传感器通道顺序配置
B-输入配置-触发阈值(硬件上做了触发,软件配置这里没有很明显的效果)
C-输入配置-倍率当某一路传感器异常灵敏或不灵敏时配置这里C为复位
D-输出时间配置H为按下保持时间L为松开保持时间保持时间内不响应其他输入
E-屏蔽配置(用于计算鼓的物理结构带来的串音影响)
F-屏蔽配置-单次响应(选择后每次只会触发一个传感器)
G-屏蔽配置-计算回合数
H-一些默认参数
I-串口选择
J-选择上载板上的参数组
K-上载按键
L-下载按键(这一步不会存储)
M-保存按键
N-软件状态
### 配置流程
1 选择串口点击上载后软件状态为Success
2 根据需求重置预设参数,
需要在板上存储的基础上修改的选择Load Saved再按上载按键
需要在默认配置基础上修改的,直接点按默认配置按钮
3 修改后,点击下载按键后,在鼓上确认参数是否合理
4 点击保存按键

8
README.md Normal file
View File

@ -0,0 +1,8 @@
# Taiko Input
太鼓输入接口usb为HID设备可以连接2个鼓和8通道的数字量输入。
## [硬件](./HW/)
## [USB-MCU](./USB-MCU/)
## [采样MCU](./Sampling-MCU/)
## [上位机](./QT-APP/)

79
Sampling-MCU/.gitignore vendored Normal file
View File

@ -0,0 +1,79 @@
# A .gitignore for Keil projects.
# Taken mostly from http://www.keil.com/support/man/docs/uv4/uv4_b_filetypes.htm
# User-specific uVision files
*.opt
*.uvopt
*.uvoptx
*.uvgui
*.uvgui.*
*.uvguix.*
# Listing files
*.cod
*.htm
*.i
*.lst
*.map
*.m51
*.m66
# define exception below if needed
*.scr
# Object and HEX files
*.axf
*.b[0-3][0-9]
*.d
*.crf
*.elf
*.h86
*.lib
*.obj
*.o
*.sbr
*.hex
# Build files
# define exception below if needed
*.bat
*._ia
*.__i
*._ii
# Generated output files
/Listings/*
/Objects/*
# Debugger files
# define exception below if needed
*.ini
# Other files
*.build_log.htm
*.cdb
*.dep
*.ic
*.lin
*.lnp
*.orc
# define exception below if needed
*.pack
# define exception below if needed
*.pdsc
*.plg
# define exception below if needed
*.sct
*.sfd
*.sfr
# Miscellaneous
*.tra
*.bin
*.fed
*.l1p
*.l2p
*.iex
# To explicitly override the above, define any exceptions here; e.g.:
# !my_customized_scatter_file.sct

File diff suppressed because one or more lines are too long

View File

@ -0,0 +1,322 @@
#MicroXplorer Configuration settings - do not modify
ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_0
ADC1.Channel-1\#ChannelRegularConversion=ADC_CHANNEL_1
ADC1.Channel-2\#ChannelRegularConversion=ADC_CHANNEL_2
ADC1.Channel-3\#ChannelRegularConversion=ADC_CHANNEL_3
ADC1.Channel-4\#ChannelRegularConversion=ADC_CHANNEL_4
ADC1.Channel-5\#ChannelRegularConversion=ADC_CHANNEL_5
ADC1.Channel-6\#ChannelRegularConversion=ADC_CHANNEL_6
ADC1.Channel-7\#ChannelRegularConversion=ADC_CHANNEL_7
ADC1.ClockPrescaler=ADC_CLOCK_ASYNC_DIV1
ADC1.ContinuousConvMode=ENABLE
ADC1.DMAContinuousRequests=ENABLE
ADC1.ExternalTrigConv=ADC_SOFTWARE_START
ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,master,SelectedChannel,ContinuousConvMode,NbrOfConversion,Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,Rank-2\#ChannelRegularConversion,Channel-2\#ChannelRegularConversion,SamplingTime-2\#ChannelRegularConversion,Rank-3\#ChannelRegularConversion,Channel-3\#ChannelRegularConversion,SamplingTime-3\#ChannelRegularConversion,Rank-4\#ChannelRegularConversion,Channel-4\#ChannelRegularConversion,SamplingTime-4\#ChannelRegularConversion,Rank-5\#ChannelRegularConversion,Channel-5\#ChannelRegularConversion,SamplingTime-5\#ChannelRegularConversion,Rank-6\#ChannelRegularConversion,Channel-6\#ChannelRegularConversion,SamplingTime-6\#ChannelRegularConversion,Rank-7\#ChannelRegularConversion,Channel-7\#ChannelRegularConversion,SamplingTime-7\#ChannelRegularConversion,ExternalTrigConv,DMAContinuousRequests,SamplingTimeCommon1,SamplingTimeCommon2,ClockPrescaler
ADC1.NbrOfConversion=8
ADC1.NbrOfConversionFlag=1
ADC1.Rank-0\#ChannelRegularConversion=1
ADC1.Rank-1\#ChannelRegularConversion=2
ADC1.Rank-2\#ChannelRegularConversion=3
ADC1.Rank-3\#ChannelRegularConversion=4
ADC1.Rank-4\#ChannelRegularConversion=5
ADC1.Rank-5\#ChannelRegularConversion=6
ADC1.Rank-6\#ChannelRegularConversion=7
ADC1.Rank-7\#ChannelRegularConversion=8
ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLINGTIME_COMMON_1
ADC1.SamplingTime-1\#ChannelRegularConversion=ADC_SAMPLINGTIME_COMMON_1
ADC1.SamplingTime-2\#ChannelRegularConversion=ADC_SAMPLINGTIME_COMMON_1
ADC1.SamplingTime-3\#ChannelRegularConversion=ADC_SAMPLINGTIME_COMMON_1
ADC1.SamplingTime-4\#ChannelRegularConversion=ADC_SAMPLINGTIME_COMMON_1
ADC1.SamplingTime-5\#ChannelRegularConversion=ADC_SAMPLINGTIME_COMMON_1
ADC1.SamplingTime-6\#ChannelRegularConversion=ADC_SAMPLINGTIME_COMMON_1
ADC1.SamplingTime-7\#ChannelRegularConversion=ADC_SAMPLINGTIME_COMMON_1
ADC1.SamplingTimeCommon1=ADC_SAMPLETIME_79CYCLES_5
ADC1.SamplingTimeCommon2=ADC_SAMPLETIME_79CYCLES_5
ADC1.SelectedChannel=ADC_CHANNEL_0|ADC_CHANNEL_1|ADC_CHANNEL_2|ADC_CHANNEL_3|ADC_CHANNEL_4|ADC_CHANNEL_5|ADC_CHANNEL_6|ADC_CHANNEL_7
ADC1.master=1
Dma.ADC1.1.Direction=DMA_PERIPH_TO_MEMORY
Dma.ADC1.1.EventEnable=DISABLE
Dma.ADC1.1.Instance=DMA1_Channel2
Dma.ADC1.1.MemDataAlignment=DMA_MDATAALIGN_HALFWORD
Dma.ADC1.1.MemInc=DMA_MINC_ENABLE
Dma.ADC1.1.Mode=DMA_CIRCULAR
Dma.ADC1.1.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD
Dma.ADC1.1.PeriphInc=DMA_PINC_DISABLE
Dma.ADC1.1.Polarity=HAL_DMAMUX_REQ_GEN_RISING
Dma.ADC1.1.Priority=DMA_PRIORITY_VERY_HIGH
Dma.ADC1.1.RequestNumber=1
Dma.ADC1.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber
Dma.ADC1.1.SignalID=NONE
Dma.ADC1.1.SyncEnable=DISABLE
Dma.ADC1.1.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT
Dma.ADC1.1.SyncRequestNumber=1
Dma.ADC1.1.SyncSignalID=NONE
Dma.Request0=USART1_TX
Dma.Request1=ADC1
Dma.RequestsNb=2
Dma.USART1_TX.0.Direction=DMA_MEMORY_TO_PERIPH
Dma.USART1_TX.0.EventEnable=DISABLE
Dma.USART1_TX.0.Instance=DMA1_Channel1
Dma.USART1_TX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
Dma.USART1_TX.0.MemInc=DMA_MINC_ENABLE
Dma.USART1_TX.0.Mode=DMA_NORMAL
Dma.USART1_TX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
Dma.USART1_TX.0.PeriphInc=DMA_PINC_DISABLE
Dma.USART1_TX.0.Polarity=HAL_DMAMUX_REQ_GEN_RISING
Dma.USART1_TX.0.Priority=DMA_PRIORITY_LOW
Dma.USART1_TX.0.RequestNumber=1
Dma.USART1_TX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber
Dma.USART1_TX.0.SignalID=NONE
Dma.USART1_TX.0.SyncEnable=DISABLE
Dma.USART1_TX.0.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT
Dma.USART1_TX.0.SyncRequestNumber=1
Dma.USART1_TX.0.SyncSignalID=NONE
File.Version=6
GPIO.groupedBy=Group By Peripherals
IWDG.IPParameters=Prescaler
IWDG.Prescaler=IWDG_PRESCALER_128
KeepUserPlacement=false
Mcu.CPN=STM32G030K6T6
Mcu.Family=STM32G0
Mcu.IP0=ADC1
Mcu.IP1=DMA
Mcu.IP2=IWDG
Mcu.IP3=NVIC
Mcu.IP4=RCC
Mcu.IP5=SYS
Mcu.IP6=TIM14
Mcu.IP7=USART1
Mcu.IPNb=8
Mcu.Name=STM32G030K(6-8)Tx
Mcu.Package=LQFP32
Mcu.Pin0=PB9
Mcu.Pin1=PC14-OSC32_IN (PC14)
Mcu.Pin10=PA7
Mcu.Pin11=PB0
Mcu.Pin12=PB1
Mcu.Pin13=PB2
Mcu.Pin14=PA8
Mcu.Pin15=PA9
Mcu.Pin16=PA10
Mcu.Pin17=PA13
Mcu.Pin18=PA14-BOOT0
Mcu.Pin19=PB3
Mcu.Pin2=PC15-OSC32_OUT (PC15)
Mcu.Pin20=PB4
Mcu.Pin21=PB5
Mcu.Pin22=PB6
Mcu.Pin23=PB7
Mcu.Pin24=PB8
Mcu.Pin25=VP_IWDG_VS_IWDG
Mcu.Pin26=VP_SYS_VS_Systick
Mcu.Pin27=VP_TIM14_VS_ClockSourceINT
Mcu.Pin3=PA0
Mcu.Pin4=PA1
Mcu.Pin5=PA2
Mcu.Pin6=PA3
Mcu.Pin7=PA4
Mcu.Pin8=PA5
Mcu.Pin9=PA6
Mcu.PinsNb=28
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32G030K6Tx
MxCube.Version=6.3.0
MxDb.Version=DB.6.0.30
NVIC.DMA1_Channel1_IRQn=true\:2\:0\:true\:false\:true\:false\:true\:true
NVIC.DMA1_Channel2_3_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
NVIC.ForceEnableDMAVector=true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
NVIC.SysTick_IRQn=true\:1\:0\:true\:false\:true\:false\:true\:true
NVIC.TIM14_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.USART1_IRQn=true\:1\:0\:true\:false\:true\:true\:true\:true
PA0.GPIOParameters=GPIO_Label
PA0.GPIO_Label=IN1
PA0.Locked=true
PA0.Mode=IN0
PA0.Signal=ADC1_IN0
PA1.GPIOParameters=GPIO_Label
PA1.GPIO_Label=IN2
PA1.Locked=true
PA1.Mode=IN1
PA1.Signal=ADC1_IN1
PA10.GPIOParameters=GPIO_PuPd
PA10.GPIO_PuPd=GPIO_PULLUP
PA10.Mode=Asynchronous
PA10.Signal=USART1_RX
PA13.GPIOParameters=GPIO_Label
PA13.GPIO_Label=SWDIO
PA13.Mode=Serial_Wire
PA13.Signal=SYS_SWDIO
PA14-BOOT0.GPIOParameters=GPIO_Label
PA14-BOOT0.GPIO_Label=SWCLK
PA14-BOOT0.Mode=Serial_Wire
PA14-BOOT0.Signal=SYS_SWCLK
PA2.GPIOParameters=GPIO_Label
PA2.GPIO_Label=IN3
PA2.Locked=true
PA2.Mode=IN2
PA2.Signal=ADC1_IN2
PA3.GPIOParameters=GPIO_Label
PA3.GPIO_Label=IN4
PA3.Locked=true
PA3.Mode=IN3
PA3.Signal=ADC1_IN3
PA4.GPIOParameters=GPIO_Label
PA4.GPIO_Label=IN5
PA4.Locked=true
PA4.Mode=IN4
PA4.Signal=ADC1_IN4
PA5.GPIOParameters=GPIO_Label
PA5.GPIO_Label=IN6
PA5.Locked=true
PA5.Mode=IN5
PA5.Signal=ADC1_IN5
PA6.GPIOParameters=GPIO_Label
PA6.GPIO_Label=IN7
PA6.Locked=true
PA6.Mode=IN6
PA6.Signal=ADC1_IN6
PA7.GPIOParameters=GPIO_Label
PA7.GPIO_Label=IN8
PA7.Locked=true
PA7.Mode=IN7
PA7.Signal=ADC1_IN7
PA8.GPIOParameters=GPIO_Label
PA8.GPIO_Label=LED_STA
PA8.Locked=true
PA8.Signal=GPIO_Output
PA9.GPIOParameters=GPIO_PuPd
PA9.GPIO_PuPd=GPIO_PULLUP
PA9.Mode=Asynchronous
PA9.Signal=USART1_TX
PB0.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_Mode
PB0.GPIO_Label=SET2
PB0.GPIO_Mode=GPIO_MODE_INPUT
PB0.GPIO_PuPd=GPIO_PULLUP
PB0.Locked=true
PB0.Signal=GPIO_Input
PB1.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_Mode
PB1.GPIO_Label=SET1
PB1.GPIO_Mode=GPIO_MODE_INPUT
PB1.GPIO_PuPd=GPIO_PULLUP
PB1.Locked=true
PB1.Signal=GPIO_Input
PB2.GPIOParameters=GPIO_PuPd,GPIO_Label
PB2.GPIO_Label=OUT8
PB2.GPIO_PuPd=GPIO_NOPULL
PB2.Locked=true
PB2.Signal=GPIO_Output
PB3.GPIOParameters=GPIO_PuPd,GPIO_Label
PB3.GPIO_Label=OUT7
PB3.GPIO_PuPd=GPIO_NOPULL
PB3.Locked=true
PB3.Signal=GPIO_Output
PB4.GPIOParameters=GPIO_PuPd,GPIO_Label
PB4.GPIO_Label=OUT6
PB4.GPIO_PuPd=GPIO_NOPULL
PB4.Locked=true
PB4.Signal=GPIO_Output
PB5.GPIOParameters=GPIO_Label
PB5.GPIO_Label=OUT5
PB5.Locked=true
PB5.Signal=GPIO_Output
PB6.GPIOParameters=GPIO_Label
PB6.GPIO_Label=OUT4
PB6.Locked=true
PB6.Signal=GPIO_Output
PB7.GPIOParameters=GPIO_Label
PB7.GPIO_Label=OUT3
PB7.Locked=true
PB7.Signal=GPIO_Output
PB8.GPIOParameters=GPIO_Label
PB8.GPIO_Label=OUT2
PB8.Locked=true
PB8.Signal=GPIO_Output
PB9.GPIOParameters=GPIO_Label
PB9.GPIO_Label=OUT1
PB9.Locked=true
PB9.Signal=GPIO_Output
PC14-OSC32_IN\ (PC14).GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_Mode
PC14-OSC32_IN\ (PC14).GPIO_Label=SET3
PC14-OSC32_IN\ (PC14).GPIO_Mode=GPIO_MODE_INPUT
PC14-OSC32_IN\ (PC14).GPIO_PuPd=GPIO_PULLUP
PC14-OSC32_IN\ (PC14).Locked=true
PC14-OSC32_IN\ (PC14).Signal=GPIO_Input
PC15-OSC32_OUT\ (PC15).GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_Mode
PC15-OSC32_OUT\ (PC15).GPIO_Label=SET4
PC15-OSC32_OUT\ (PC15).GPIO_Mode=GPIO_MODE_INPUT
PC15-OSC32_OUT\ (PC15).GPIO_PuPd=GPIO_PULLUP
PC15-OSC32_OUT\ (PC15).Locked=true
PC15-OSC32_OUT\ (PC15).Signal=GPIO_Input
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=true
ProjectManager.BackupPrevious=false
ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=false
ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=true
ProjectManager.DeviceId=STM32G030K6Tx
ProjectManager.FirmwarePackage=STM32Cube FW_G0 V1.5.0
ProjectManager.FreePins=false
ProjectManager.HalAssertFull=false
ProjectManager.HeapSize=0x200
ProjectManager.KeepUserCode=true
ProjectManager.LastFirmware=true
ProjectManager.LibraryCopy=0
ProjectManager.MainLocation=Core/Src
ProjectManager.NoMain=false
ProjectManager.PreviousToolchain=
ProjectManager.ProjectBuild=false
ProjectManager.ProjectFileName=8ch.ioc
ProjectManager.ProjectName=8ch
ProjectManager.RegisterCallBack=
ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=MDK-ARM V5.32
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_IWDG_Init-IWDG-false-HAL-true,4-MX_DMA_Init-DMA-false-HAL-true,5-MX_USART1_UART_Init-USART1-false-HAL-true,6-MX_TIM14_Init-TIM14-false-HAL-true,7-MX_ADC1_Init-ADC1-false-HAL-true
RCC.ADCFreq_Value=64000000
RCC.AHBFreq_Value=64000000
RCC.APBFreq_Value=64000000
RCC.APBTimFreq_Value=64000000
RCC.CortexFreq_Value=64000000
RCC.EXTERNAL_CLOCK_VALUE=12288000
RCC.FCLKCortexFreq_Value=64000000
RCC.FamilyName=M
RCC.HCLKFreq_Value=64000000
RCC.HSE_VALUE=8000000
RCC.HSI_VALUE=16000000
RCC.I2C1Freq_Value=64000000
RCC.I2S1Freq_Value=64000000
RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APBFreq_Value,APBTimFreq_Value,CortexFreq_Value,EXTERNAL_CLOCK_VALUE,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2S1Freq_Value,LSCOPinFreq_Value,LSE_VALUE,LSI_VALUE,MCO1PinFreq_Value,PLLPoutputFreq_Value,PLLRCLKFreq_Value,PWRFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,USART1Freq_Value,VCOInputFreq_Value,VCOOutputFreq_Value
RCC.LSCOPinFreq_Value=32000
RCC.LSE_VALUE=32768
RCC.LSI_VALUE=32000
RCC.MCO1PinFreq_Value=64000000
RCC.PLLPoutputFreq_Value=64000000
RCC.PLLRCLKFreq_Value=64000000
RCC.PWRFreq_Value=64000000
RCC.SYSCLKFreq_VALUE=64000000
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
RCC.USART1Freq_Value=64000000
RCC.VCOInputFreq_Value=16000000
RCC.VCOOutputFreq_Value=128000000
TIM14.IPParameters=Period,Prescaler
TIM14.Period=64000
TIM14.Prescaler=32 - 1
USART1.BaudRate=9600
USART1.IPParameters=VirtualMode-Asynchronous,BaudRate
USART1.VirtualMode-Asynchronous=VM_ASYNC
VP_IWDG_VS_IWDG.Mode=IWDG_Activate
VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
VP_TIM14_VS_ClockSourceINT.Mode=Enable_Timer
VP_TIM14_VS_ClockSourceINT.Signal=TIM14_VS_ClockSourceINT
board=custom

View File

@ -0,0 +1,182 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : main.h
* @brief : Header for main.c file.
* This file contains the common defines of the application.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "string.h"
/* USER CODE END Includes */
/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */
/* USER CODE END ET */
/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */
/* USER CODE END EC */
/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */
/* USER CODE END EM */
/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);
/* USER CODE BEGIN EFP */
//#define IS_4CH_MODE
#ifndef IS_4CH_MODE
extern uint8_t SET_1;
extern uint8_t SET_2;
extern uint8_t SET_3;
extern uint8_t SET_4;
#endif
extern ADC_HandleTypeDef hadc1;
extern DMA_HandleTypeDef hdma_adc1;
extern IWDG_HandleTypeDef hiwdg;
extern TIM_HandleTypeDef htim14;
extern UART_HandleTypeDef huart1;
extern DMA_HandleTypeDef hdma_usart1_tx;
uint8_t CloseIrqAndSave(void);
void CloseIrqAndActive(uint8_t data);
#ifdef IS_4CH_MODE
#define OUT2_Pin GPIO_PIN_14
#define OUT2_GPIO_Port GPIOC
#define OUT3_Pin GPIO_PIN_15
#define OUT3_GPIO_Port GPIOC
#define IN1_Pin GPIO_PIN_0
#define IN1_GPIO_Port GPIOA
#define IN2_Pin GPIO_PIN_1
#define IN2_GPIO_Port GPIOA
#define IN3_Pin GPIO_PIN_2
#define IN3_GPIO_Port GPIOA
#define IN4_Pin GPIO_PIN_3
#define IN4_GPIO_Port GPIOA
#define IN5_Pin GPIO_PIN_4
#define IN5_GPIO_Port GPIOA
#define IN6_Pin GPIO_PIN_5
#define IN6_GPIO_Port GPIOA
#define IN7_Pin GPIO_PIN_6
#define IN7_GPIO_Port GPIOA
#define IN8_Pin GPIO_PIN_7
#define IN8_GPIO_Port GPIOA
#define LED_STA_Pin GPIO_PIN_8
#define LED_STA_GPIO_Port GPIOA
#define OUT1_Pin GPIO_PIN_11
#define OUT1_GPIO_Port GPIOA
#define OUT4_Pin GPIO_PIN_12
#define OUT4_GPIO_Port GPIOA
#define SWDIO_Pin GPIO_PIN_13
#define SWDIO_GPIO_Port GPIOA
#define SWCLK_Pin GPIO_PIN_14
#define SWCLK_GPIO_Port GPIOA
#else
/* USER CODE END EFP */
/* Private defines -----------------------------------------------------------*/
#define OUT1_Pin GPIO_PIN_9
#define OUT1_GPIO_Port GPIOB
#define SET3_Pin GPIO_PIN_14
#define SET3_GPIO_Port GPIOC
#define SET4_Pin GPIO_PIN_15
#define SET4_GPIO_Port GPIOC
#define IN1_Pin GPIO_PIN_0
#define IN1_GPIO_Port GPIOA
#define IN2_Pin GPIO_PIN_1
#define IN2_GPIO_Port GPIOA
#define IN3_Pin GPIO_PIN_2
#define IN3_GPIO_Port GPIOA
#define IN4_Pin GPIO_PIN_3
#define IN4_GPIO_Port GPIOA
#define IN5_Pin GPIO_PIN_4
#define IN5_GPIO_Port GPIOA
#define IN6_Pin GPIO_PIN_5
#define IN6_GPIO_Port GPIOA
#define IN7_Pin GPIO_PIN_6
#define IN7_GPIO_Port GPIOA
#define IN8_Pin GPIO_PIN_7
#define IN8_GPIO_Port GPIOA
#define SET2_Pin GPIO_PIN_0
#define SET2_GPIO_Port GPIOB
#define SET1_Pin GPIO_PIN_1
#define SET1_GPIO_Port GPIOB
#define OUT8_Pin GPIO_PIN_2
#define OUT8_GPIO_Port GPIOB
#define LED_STA_Pin GPIO_PIN_8
#define LED_STA_GPIO_Port GPIOA
#define SWDIO_Pin GPIO_PIN_13
#define SWDIO_GPIO_Port GPIOA
#define SWCLK_Pin GPIO_PIN_14
#define SWCLK_GPIO_Port GPIOA
#define OUT7_Pin GPIO_PIN_3
#define OUT7_GPIO_Port GPIOB
#define OUT6_Pin GPIO_PIN_4
#define OUT6_GPIO_Port GPIOB
#define OUT5_Pin GPIO_PIN_5
#define OUT5_GPIO_Port GPIOB
#define OUT4_Pin GPIO_PIN_6
#define OUT4_GPIO_Port GPIOB
#define OUT3_Pin GPIO_PIN_7
#define OUT3_GPIO_Port GPIOB
#define OUT2_Pin GPIO_PIN_8
#define OUT2_GPIO_Port GPIOB
/* USER CODE BEGIN Private defines */
#endif
/* USER CODE END Private defines */
#ifdef __cplusplus
}
#endif
#endif /* __MAIN_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -0,0 +1,352 @@
/**
******************************************************************************
* @file stm32g0xx_hal_conf.h
* @author MCD Application Team
* @brief HAL configuration file.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_CONF_H
#define STM32G0xx_HAL_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
/* #define HAL_CEC_MODULE_ENABLED */
/* #define HAL_COMP_MODULE_ENABLED */
/* #define HAL_CRC_MODULE_ENABLED */
/* #define HAL_CRYP_MODULE_ENABLED */
/* #define HAL_DAC_MODULE_ENABLED */
/* #define HAL_EXTI_MODULE_ENABLED */
/* #define HAL_FDCAN_MODULE_ENABLED */
/* #define HAL_HCD_MODULE_ENABLED */
/* #define HAL_I2C_MODULE_ENABLED */
/* #define HAL_I2S_MODULE_ENABLED */
#define HAL_IWDG_MODULE_ENABLED
/* #define HAL_IRDA_MODULE_ENABLED */
/* #define HAL_LPTIM_MODULE_ENABLED */
/* #define HAL_PCD_MODULE_ENABLED */
/* #define HAL_RNG_MODULE_ENABLED */
/* #define HAL_RTC_MODULE_ENABLED */
/* #define HAL_SMARTCARD_MODULE_ENABLED */
/* #define HAL_SMBUS_MODULE_ENABLED */
/* #define HAL_SPI_MODULE_ENABLED */
#define HAL_TIM_MODULE_ENABLED
#define HAL_UART_MODULE_ENABLED
/* #define HAL_USART_MODULE_ENABLED */
/* #define HAL_WWDG_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
/* ########################## Register Callbacks selection ############################## */
/**
* @brief This is the list of modules where register callback can be used
*/
#define USE_HAL_ADC_REGISTER_CALLBACKS 0u
#define USE_HAL_CEC_REGISTER_CALLBACKS 0u
#define USE_HAL_COMP_REGISTER_CALLBACKS 0u
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u
#define USE_HAL_DAC_REGISTER_CALLBACKS 0u
#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0u
#define USE_HAL_HCD_REGISTER_CALLBACKS 0u
#define USE_HAL_I2C_REGISTER_CALLBACKS 0u
#define USE_HAL_I2S_REGISTER_CALLBACKS 0u
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u
#define USE_HAL_PCD_REGISTER_CALLBACKS 0u
#define USE_HAL_RNG_REGISTER_CALLBACKS 0u
#define USE_HAL_RTC_REGISTER_CALLBACKS 0u
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u
#define USE_HAL_SPI_REGISTER_CALLBACKS 0u
#define USE_HAL_TIM_REGISTER_CALLBACKS 0u
#define USE_HAL_UART_REGISTER_CALLBACKS 0u
#define USE_HAL_USART_REGISTER_CALLBACKS 0u
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u
/* ########################## Oscillator Values adaptation ####################*/
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
/**
* @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
* This internal oscillator is mainly dedicated to provide a high precision clock to
* the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
* When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
* which is subject to manufacturing process variations.
*/
#if !defined (HSI48_VALUE)
#define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
The real value my vary depending on manufacturing process variations.*/
#endif /* HSI48_VALUE */
#endif
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature.*/
/**
* @brief External Low Speed oscillator (LSE) value.
* This value is used by the UART, RTC HAL module to compute the system frequency
*/
#if !defined (LSE_VALUE)
#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/**
* @brief External clock source for I2S1 peripheral
* This value is used by the RCC HAL module to compute the I2S1 clock source
* frequency.
*/
#if !defined (EXTERNAL_I2S1_CLOCK_VALUE)
#define EXTERNAL_I2S1_CLOCK_VALUE (12288000UL) /*!< Value of the I2S1 External clock source in Hz*/
#endif /* EXTERNAL_I2S1_CLOCK_VALUE */
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
/**
* @brief External clock source for I2S2 peripheral
* This value is used by the RCC HAL module to compute the I2S2 clock source
* frequency.
*/
#if !defined (EXTERNAL_I2S2_CLOCK_VALUE)
#define EXTERNAL_I2S2_CLOCK_VALUE 48000U /*!< Value of the I2S2 External clock source in Hz*/
#endif /* EXTERNAL_I2S2_CLOCK_VALUE */
#endif
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY 1U /*!< tick interrupt priority */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 1U
#define INSTRUCTION_CACHE_ENABLE 1U
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#define USE_SPI_CRC 0U
/* ################## CRYP peripheral configuration ########################## */
#define USE_HAL_CRYP_SUSPEND_RESUME 1U
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include modules header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32g0xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32g0xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32g0xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32g0xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32g0xx_hal_adc.h"
#include "stm32g0xx_hal_adc_ex.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
#include "stm32g0xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_COMP_MODULE_ENABLED
#include "stm32g0xx_hal_comp.h"
#endif /* HAL_COMP_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32g0xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_CRYP_MODULE_ENABLED
#include "stm32g0xx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32g0xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_EXTI_MODULE_ENABLED
#include "stm32g0xx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32g0xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_FDCAN_MODULE_ENABLED
#include "stm32g0xx_hal_fdcan.h"
#endif /* HAL_FDCAN_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32g0xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32g0xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32g0xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32g0xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32g0xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_LPTIM_MODULE_ENABLED
#include "stm32g0xx_hal_lptim.h"
#endif /* HAL_LPTIM_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32g0xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32g0xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_RNG_MODULE_ENABLED
#include "stm32g0xx_hal_rng.h"
#endif /* HAL_RNG_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32g0xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32g0xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_SMBUS_MODULE_ENABLED
#include "stm32g0xx_hal_smbus.h"
#endif /* HAL_SMBUS_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32g0xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32g0xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32g0xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32g0xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32g0xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for functions parameters check.
* @param expr If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t *file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -0,0 +1,69 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32g0xx_it.h
* @brief This file contains the headers of the interrupt handlers.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32G0xx_IT_H
#define __STM32G0xx_IT_H
#ifdef __cplusplus
extern "C" {
#endif
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */
/* USER CODE END ET */
/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */
/* USER CODE END EC */
/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */
/* USER CODE END EM */
/* Exported functions prototypes ---------------------------------------------*/
void NMI_Handler(void);
void HardFault_Handler(void);
void SVC_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);
void DMA1_Channel1_IRQHandler(void);
void DMA1_Channel2_3_IRQHandler(void);
void TIM14_IRQHandler(void);
void USART1_IRQHandler(void);
/* USER CODE BEGIN EFP */
/* USER CODE END EFP */
#ifdef __cplusplus
}
#endif
#endif /* __STM32G0xx_IT_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,389 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32g0xx_hal_msp.c
* @brief This file provides code for the MSP Initialization
* and de-Initialization codes.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
extern DMA_HandleTypeDef hdma_adc1;
extern DMA_HandleTypeDef hdma_usart1_tx;
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */
/* USER CODE END TD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN Define */
/* USER CODE END Define */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN Macro */
/* USER CODE END Macro */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* External functions --------------------------------------------------------*/
/* USER CODE BEGIN ExternalFunctions */
/* USER CODE END ExternalFunctions */
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
* Initializes the Global MSP.
*/
void HAL_MspInit(void)
{
/* USER CODE BEGIN MspInit 0 */
/* USER CODE END MspInit 0 */
__HAL_RCC_SYSCFG_CLK_ENABLE();
__HAL_RCC_PWR_CLK_ENABLE();
/* System interrupt init*/
/* USER CODE BEGIN MspInit 1 */
/* USER CODE END MspInit 1 */
}
/**
* @brief ADC MSP Initialization
* This function configures the hardware resources used in this example
* @param hadc: ADC handle pointer
* @retval None
*/
void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hadc->Instance==ADC1)
{
/* USER CODE BEGIN ADC1_MspInit 0 */
/* USER CODE END ADC1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_ADC_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**ADC1 GPIO Configuration
PA0 ------> ADC1_IN0
PA1 ------> ADC1_IN1
PA2 ------> ADC1_IN2
PA3 ------> ADC1_IN3
PA4 ------> ADC1_IN4
PA5 ------> ADC1_IN5
PA6 ------> ADC1_IN6
PA7 ------> ADC1_IN7
*/
GPIO_InitStruct.Pin = IN1_Pin|IN2_Pin|IN3_Pin|IN4_Pin
|IN5_Pin|IN6_Pin|IN7_Pin|IN8_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* ADC1 DMA Init */
/* ADC1 Init */
hdma_adc1.Instance = DMA1_Channel2;
hdma_adc1.Init.Request = DMA_REQUEST_ADC1;
hdma_adc1.Init.Direction = DMA_PERIPH_TO_MEMORY;
hdma_adc1.Init.PeriphInc = DMA_PINC_DISABLE;
hdma_adc1.Init.MemInc = DMA_MINC_ENABLE;
hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
hdma_adc1.Init.Mode = DMA_CIRCULAR;
hdma_adc1.Init.Priority = DMA_PRIORITY_VERY_HIGH;
if (HAL_DMA_Init(&hdma_adc1) != HAL_OK)
{
Error_Handler();
}
__HAL_LINKDMA(hadc,DMA_Handle,hdma_adc1);
/* USER CODE BEGIN ADC1_MspInit 1 */
/* USER CODE END ADC1_MspInit 1 */
}
}
/**
* @brief ADC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hadc: ADC handle pointer
* @retval None
*/
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{
if(hadc->Instance==ADC1)
{
/* USER CODE BEGIN ADC1_MspDeInit 0 */
/* USER CODE END ADC1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_ADC_CLK_DISABLE();
/**ADC1 GPIO Configuration
PA0 ------> ADC1_IN0
PA1 ------> ADC1_IN1
PA2 ------> ADC1_IN2
PA3 ------> ADC1_IN3
PA4 ------> ADC1_IN4
PA5 ------> ADC1_IN5
PA6 ------> ADC1_IN6
PA7 ------> ADC1_IN7
*/
HAL_GPIO_DeInit(GPIOA, IN1_Pin|IN2_Pin|IN3_Pin|IN4_Pin
|IN5_Pin|IN6_Pin|IN7_Pin|IN8_Pin);
/* ADC1 DMA DeInit */
HAL_DMA_DeInit(hadc->DMA_Handle);
/* USER CODE BEGIN ADC1_MspDeInit 1 */
/* USER CODE END ADC1_MspDeInit 1 */
}
}
/**
* @brief TIM_Base MSP Initialization
* This function configures the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
{
if(htim_base->Instance==TIM14)
{
/* USER CODE BEGIN TIM14_MspInit 0 */
/* USER CODE END TIM14_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_TIM14_CLK_ENABLE();
/* TIM14 interrupt Init */
HAL_NVIC_SetPriority(TIM14_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(TIM14_IRQn);
/* USER CODE BEGIN TIM14_MspInit 1 */
/* USER CODE END TIM14_MspInit 1 */
}
}
/**
* @brief TIM_Base MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
{
if(htim_base->Instance==TIM14)
{
/* USER CODE BEGIN TIM14_MspDeInit 0 */
/* USER CODE END TIM14_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_TIM14_CLK_DISABLE();
/* TIM14 interrupt DeInit */
HAL_NVIC_DisableIRQ(TIM14_IRQn);
/* USER CODE BEGIN TIM14_MspDeInit 1 */
/* USER CODE END TIM14_MspDeInit 1 */
}
}
/**
* @brief UART MSP Initialization
* This function configures the hardware resources used in this example
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(huart->Instance==USART1)
{
/* USER CODE BEGIN USART1_MspInit 0 */
#ifdef IS_4CH_MODE
/* Peripheral clock enable */
__HAL_RCC_USART1_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/**USART1 GPIO Configuration
PB7 ------> USART1_RX
PB6 ------> USART1_TX
*/
GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_6;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF0_USART1;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* USART1 DMA Init */
/* USART1_TX Init */
hdma_usart1_tx.Instance = DMA1_Channel1;
hdma_usart1_tx.Init.Request = DMA_REQUEST_USART1_TX;
hdma_usart1_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
hdma_usart1_tx.Init.PeriphInc = DMA_PINC_DISABLE;
hdma_usart1_tx.Init.MemInc = DMA_MINC_ENABLE;
hdma_usart1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
hdma_usart1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
hdma_usart1_tx.Init.Mode = DMA_NORMAL;
hdma_usart1_tx.Init.Priority = DMA_PRIORITY_LOW;
if (HAL_DMA_Init(&hdma_usart1_tx) != HAL_OK)
{
Error_Handler();
}
__HAL_LINKDMA(huart,hdmatx,hdma_usart1_tx);
/* USART1 interrupt Init */
HAL_NVIC_SetPriority(USART1_IRQn, 1, 0);
HAL_NVIC_EnableIRQ(USART1_IRQn);
return;
#endif
/* USER CODE END USART1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_USART1_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**USART1 GPIO Configuration
PA9 ------> USART1_TX
PA10 ------> USART1_RX
*/
GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF1_USART1;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USART1 DMA Init */
/* USART1_TX Init */
hdma_usart1_tx.Instance = DMA1_Channel1;
hdma_usart1_tx.Init.Request = DMA_REQUEST_USART1_TX;
hdma_usart1_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
hdma_usart1_tx.Init.PeriphInc = DMA_PINC_DISABLE;
hdma_usart1_tx.Init.MemInc = DMA_MINC_ENABLE;
hdma_usart1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
hdma_usart1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
hdma_usart1_tx.Init.Mode = DMA_NORMAL;
hdma_usart1_tx.Init.Priority = DMA_PRIORITY_LOW;
if (HAL_DMA_Init(&hdma_usart1_tx) != HAL_OK)
{
Error_Handler();
}
__HAL_LINKDMA(huart,hdmatx,hdma_usart1_tx);
/* USART1 interrupt Init */
HAL_NVIC_SetPriority(USART1_IRQn, 1, 0);
HAL_NVIC_EnableIRQ(USART1_IRQn);
/* USER CODE BEGIN USART1_MspInit 1 */
/* USER CODE END USART1_MspInit 1 */
}
}
/**
* @brief UART MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
{
if(huart->Instance==USART1)
{
/* USER CODE BEGIN USART1_MspDeInit 0 */
#ifdef IS_4CH_MODE
/* Peripheral clock disable */
__HAL_RCC_USART1_CLK_DISABLE();
/**USART1 GPIO Configuration
PB7 ------> USART1_RX
PB6 ------> USART1_TX
*/
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7|GPIO_PIN_6);
/* USART1 DMA DeInit */
HAL_DMA_DeInit(huart->hdmatx);
/* USART1 interrupt DeInit */
HAL_NVIC_DisableIRQ(USART1_IRQn);
return;
#endif
/* USER CODE END USART1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USART1_CLK_DISABLE();
/**USART1 GPIO Configuration
PA9 ------> USART1_TX
PA10 ------> USART1_RX
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
/* USART1 DMA DeInit */
HAL_DMA_DeInit(huart->hdmatx);
/* USART1 interrupt DeInit */
HAL_NVIC_DisableIRQ(USART1_IRQn);
/* USER CODE BEGIN USART1_MspDeInit 1 */
/* USER CODE END USART1_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -0,0 +1,217 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32g0xx_it.c
* @brief Interrupt Service Routines.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "stm32g0xx_it.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */
/* USER CODE END TD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
void IO_OutputList(void);
/* USER CODE END 0 */
/* External variables --------------------------------------------------------*/
extern DMA_HandleTypeDef hdma_adc1;
extern TIM_HandleTypeDef htim14;
extern DMA_HandleTypeDef hdma_usart1_tx;
extern UART_HandleTypeDef huart1;
/* USER CODE BEGIN EV */
/* USER CODE END EV */
/******************************************************************************/
/* Cortex-M0+ Processor Interruption and Exception Handlers */
/******************************************************************************/
/**
* @brief This function handles Non maskable interrupt.
*/
void NMI_Handler(void)
{
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
/* USER CODE END NonMaskableInt_IRQn 0 */
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
while (1)
{
}
/* USER CODE END NonMaskableInt_IRQn 1 */
}
/**
* @brief This function handles Hard fault interrupt.
*/
void HardFault_Handler(void)
{
/* USER CODE BEGIN HardFault_IRQn 0 */
HAL_NVIC_SystemReset();
/* USER CODE END HardFault_IRQn 0 */
while (1)
{
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
/* USER CODE END W1_HardFault_IRQn 0 */
}
}
/**
* @brief This function handles System service call via SWI instruction.
*/
void SVC_Handler(void)
{
/* USER CODE BEGIN SVC_IRQn 0 */
/* USER CODE END SVC_IRQn 0 */
/* USER CODE BEGIN SVC_IRQn 1 */
/* USER CODE END SVC_IRQn 1 */
}
/**
* @brief This function handles Pendable request for system service.
*/
void PendSV_Handler(void)
{
/* USER CODE BEGIN PendSV_IRQn 0 */
/* USER CODE END PendSV_IRQn 0 */
/* USER CODE BEGIN PendSV_IRQn 1 */
/* USER CODE END PendSV_IRQn 1 */
}
/**
* @brief This function handles System tick timer.
*/
void SysTick_Handler(void)
{
/* USER CODE BEGIN SysTick_IRQn 0 */
/* USER CODE END SysTick_IRQn 0 */
HAL_IncTick();
/* USER CODE BEGIN SysTick_IRQn 1 */
/* USER CODE END SysTick_IRQn 1 */
}
/******************************************************************************/
/* STM32G0xx Peripheral Interrupt Handlers */
/* Add here the Interrupt Handlers for the used peripherals. */
/* For the available peripheral interrupt handler names, */
/* please refer to the startup file (startup_stm32g0xx.s). */
/******************************************************************************/
/**
* @brief This function handles DMA1 channel 1 interrupt.
*/
void DMA1_Channel1_IRQHandler(void)
{
/* USER CODE BEGIN DMA1_Channel1_IRQn 0 */
/* USER CODE END DMA1_Channel1_IRQn 0 */
HAL_DMA_IRQHandler(&hdma_usart1_tx);
/* USER CODE BEGIN DMA1_Channel1_IRQn 1 */
/* USER CODE END DMA1_Channel1_IRQn 1 */
}
/**
* @brief This function handles DMA1 channel 2 and channel 3 interrupts.
*/
void DMA1_Channel2_3_IRQHandler(void)
{
/* USER CODE BEGIN DMA1_Channel2_3_IRQn 0 */
/* USER CODE END DMA1_Channel2_3_IRQn 0 */
HAL_DMA_IRQHandler(&hdma_adc1);
/* USER CODE BEGIN DMA1_Channel2_3_IRQn 1 */
/* USER CODE END DMA1_Channel2_3_IRQn 1 */
}
/**
* @brief This function handles TIM14 global interrupt.
*/
void TIM14_IRQHandler(void)
{
/* USER CODE BEGIN TIM14_IRQn 0 */
if(htim14.Instance->SR & TIM_FLAG_UPDATE){
htim14.Instance->SR &= ~TIM_IT_UPDATE;
IO_OutputList();
}
return;
/* USER CODE END TIM14_IRQn 0 */
HAL_TIM_IRQHandler(&htim14);
/* USER CODE BEGIN TIM14_IRQn 1 */
/* USER CODE END TIM14_IRQn 1 */
}
/**
* @brief This function handles USART1 global interrupt / USART1 wake-up interrupt through EXTI line 25.
*/
void USART1_IRQHandler(void)
{
/* USER CODE BEGIN USART1_IRQn 0 */
/* USER CODE END USART1_IRQn 0 */
HAL_UART_IRQHandler(&huart1);
/* USER CODE BEGIN USART1_IRQn 1 */
/* USER CODE END USART1_IRQn 1 */
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -0,0 +1,304 @@
/**
******************************************************************************
* @file system_stm32g0xx.c
* @author MCD Application Team
* @brief CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File
*
* This file provides two functions and one global variable to be called from
* user application:
* - SystemInit(): This function is called at startup just after reset and
* before branch to main program. This call is made inside
* the "startup_stm32g0xx.s" file.
*
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
* by the user application to setup the SysTick
* timer or configure other parameters.
*
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
* be called whenever the core clock is changed
* during program execution.
*
* After each device reset the HSI (8 MHz then 16 MHz) is used as system clock source.
* Then SystemInit() function is called, in "startup_stm32g0xx.s" file, to
* configure the system clock before to branch to main program.
*
* This file configures the system clock as follows:
*=============================================================================
*-----------------------------------------------------------------------------
* System Clock source | HSI
*-----------------------------------------------------------------------------
* SYSCLK(Hz) | 16000000
*-----------------------------------------------------------------------------
* HCLK(Hz) | 16000000
*-----------------------------------------------------------------------------
* AHB Prescaler | 1
*-----------------------------------------------------------------------------
* APB Prescaler | 1
*-----------------------------------------------------------------------------
* HSI Division factor | 1
*-----------------------------------------------------------------------------
* PLL_M | 1
*-----------------------------------------------------------------------------
* PLL_N | 8
*-----------------------------------------------------------------------------
* PLL_P | 7
*-----------------------------------------------------------------------------
* PLL_Q | 2
*-----------------------------------------------------------------------------
* PLL_R | 2
*-----------------------------------------------------------------------------
* Require 48MHz for RNG | Disabled
*-----------------------------------------------------------------------------
*=============================================================================
******************************************************************************
* @attention
*
* Copyright (c) 2018-2021 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32g0xx_system
* @{
*/
/** @addtogroup STM32G0xx_System_Private_Includes
* @{
*/
#include "stm32g0xx.h"
#if !defined (HSE_VALUE)
#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSI_VALUE)
#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
#if !defined (LSI_VALUE)
#define LSI_VALUE (32000UL) /*!< Value of LSI in Hz*/
#endif /* LSI_VALUE */
#if !defined (LSE_VALUE)
#define LSE_VALUE (32768UL) /*!< Value of LSE in Hz*/
#endif /* LSE_VALUE */
/**
* @}
*/
/** @addtogroup STM32G0xx_System_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @addtogroup STM32G0xx_System_Private_Defines
* @{
*/
/************************* Miscellaneous Configuration ************************/
/* Note: Following vector table addresses must be defined in line with linker
configuration. */
/*!< Uncomment the following line if you need to relocate the vector table
anywhere in Flash or Sram, else the vector table is kept at the automatic
remap of boot address selected */
/* #define USER_VECT_TAB_ADDRESS */
#if defined(USER_VECT_TAB_ADDRESS)
/*!< Uncomment the following line if you need to relocate your vector Table
in Sram else user remap will be done in Flash. */
/* #define VECT_TAB_SRAM */
#if defined(VECT_TAB_SRAM)
#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field.
This value must be a multiple of 0x200. */
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
#else
#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field.
This value must be a multiple of 0x200. */
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
#endif /* VECT_TAB_SRAM */
#endif /* USER_VECT_TAB_ADDRESS */
/******************************************************************************/
/**
* @}
*/
/** @addtogroup STM32G0xx_System_Private_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32G0xx_System_Private_Variables
* @{
*/
/* The SystemCoreClock variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
uint32_t SystemCoreClock = 16000000UL;
const uint32_t AHBPrescTable[16UL] = {0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL, 6UL, 7UL, 8UL, 9UL};
const uint32_t APBPrescTable[8UL] = {0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL};
/**
* @}
*/
/** @addtogroup STM32G0xx_System_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32G0xx_System_Private_Functions
* @{
*/
/**
* @brief Setup the microcontroller system.
* @param None
* @retval None
*/
void SystemInit(void)
{
/* Configure the Vector Table location -------------------------------------*/
#if defined(USER_VECT_TAB_ADDRESS)
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation */
#endif /* USER_VECT_TAB_ADDRESS */
}
/**
* @brief Update SystemCoreClock variable according to Clock Register Values.
* The SystemCoreClock variable contains the core clock (HCLK), it can
* be used by the user application to setup the SysTick timer or configure
* other parameters.
*
* @note Each time the core clock (HCLK) changes, this function must be called
* to update SystemCoreClock variable value. Otherwise, any configuration
* based on this variable will be incorrect.
*
* @note - The system frequency computed by this function is not the real
* frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
*
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) / HSI division factor
*
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
*
* - If SYSCLK source is LSI, SystemCoreClock will contain the LSI_VALUE
*
* - If SYSCLK source is LSE, SystemCoreClock will contain the LSE_VALUE
*
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
*
* (**) HSI_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value
* 16 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
*
* (***) HSE_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value
* 8 MHz), user has to ensure that HSE_VALUE is same as the real
* frequency of the crystal used. Otherwise, this function may
* have wrong result.
*
* - The result of this function could be not correct when using fractional
* value for HSE crystal.
*
* @param None
* @retval None
*/
void SystemCoreClockUpdate(void)
{
uint32_t tmp;
uint32_t pllvco;
uint32_t pllr;
uint32_t pllsource;
uint32_t pllm;
uint32_t hsidiv;
/* Get SYSCLK source -------------------------------------------------------*/
switch (RCC->CFGR & RCC_CFGR_SWS)
{
case RCC_CFGR_SWS_0: /* HSE used as system clock */
SystemCoreClock = HSE_VALUE;
break;
case (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0): /* LSI used as system clock */
SystemCoreClock = LSI_VALUE;
break;
case RCC_CFGR_SWS_2: /* LSE used as system clock */
SystemCoreClock = LSE_VALUE;
break;
case RCC_CFGR_SWS_1: /* PLL used as system clock */
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
SYSCLK = PLL_VCO / PLLR
*/
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1UL;
if(pllsource == 0x03UL) /* HSE used as PLL clock source */
{
pllvco = (HSE_VALUE / pllm);
}
else /* HSI used as PLL clock source */
{
pllvco = (HSI_VALUE / pllm);
}
pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1UL);
SystemCoreClock = pllvco/pllr;
break;
case 0x00000000U: /* HSI used as system clock */
default: /* HSI used as system clock */
hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV))>> RCC_CR_HSIDIV_Pos));
SystemCoreClock = (HSI_VALUE/hsidiv);
break;
}
/* Compute HCLK clock frequency --------------------------------------------*/
/* Get HCLK prescaler */
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos)];
/* HCLK clock frequency */
SystemCoreClock >>= tmp;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -0,0 +1,894 @@
/**************************************************************************//**
* @file cmsis_armcc.h
* @brief CMSIS compiler ARMCC (Arm Compiler 5) header file
* @version V5.1.0
* @date 08. May 2019
******************************************************************************/
/*
* Copyright (c) 2009-2019 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __CMSIS_ARMCC_H
#define __CMSIS_ARMCC_H
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
#error "Please use Arm Compiler Toolchain V4.0.677 or later!"
#endif
/* CMSIS compiler control architecture macros */
#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \
(defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) )
#define __ARM_ARCH_6M__ 1
#endif
#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1))
#define __ARM_ARCH_7M__ 1
#endif
#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1))
#define __ARM_ARCH_7EM__ 1
#endif
/* __ARM_ARCH_8M_BASE__ not applicable */
/* __ARM_ARCH_8M_MAIN__ not applicable */
/* CMSIS compiler control DSP macros */
#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
#define __ARM_FEATURE_DSP 1
#endif
/* CMSIS compiler specific defines */
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE __inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static __inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE static __forceinline
#endif
#ifndef __NO_RETURN
#define __NO_RETURN __declspec(noreturn)
#endif
#ifndef __USED
#define __USED __attribute__((used))
#endif
#ifndef __WEAK
#define __WEAK __attribute__((weak))
#endif
#ifndef __PACKED
#define __PACKED __attribute__((packed))
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT __packed struct
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION __packed union
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
#define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x)))
#endif
#ifndef __UNALIGNED_UINT16_WRITE
#define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
#define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr)))
#endif
#ifndef __UNALIGNED_UINT32_WRITE
#define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
#define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr)))
#endif
#ifndef __ALIGNED
#define __ALIGNED(x) __attribute__((aligned(x)))
#endif
#ifndef __RESTRICT
#define __RESTRICT __restrict
#endif
#ifndef __COMPILER_BARRIER
#define __COMPILER_BARRIER() __memory_changed()
#endif
/* ######################### Startup and Lowlevel Init ######################## */
#ifndef __PROGRAM_START
#define __PROGRAM_START __main
#endif
#ifndef __INITIAL_SP
#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit
#endif
#ifndef __STACK_LIMIT
#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base
#endif
#ifndef __VECTOR_TABLE
#define __VECTOR_TABLE __Vectors
#endif
#ifndef __VECTOR_TABLE_ATTRIBUTE
#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET")))
#endif
/* ########################### Core Function Access ########################### */
/** \ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
@{
*/
/**
\brief Enable IRQ Interrupts
\details Enables IRQ interrupts by clearing the I-bit in the CPSR.
Can only be executed in Privileged modes.
*/
/* intrinsic void __enable_irq(); */
/**
\brief Disable IRQ Interrupts
\details Disables IRQ interrupts by setting the I-bit in the CPSR.
Can only be executed in Privileged modes.
*/
/* intrinsic void __disable_irq(); */
/**
\brief Get Control Register
\details Returns the content of the Control Register.
\return Control Register value
*/
__STATIC_INLINE uint32_t __get_CONTROL(void)
{
register uint32_t __regControl __ASM("control");
return(__regControl);
}
/**
\brief Set Control Register
\details Writes the given value to the Control Register.
\param [in] control Control Register value to set
*/
__STATIC_INLINE void __set_CONTROL(uint32_t control)
{
register uint32_t __regControl __ASM("control");
__regControl = control;
}
/**
\brief Get IPSR Register
\details Returns the content of the IPSR Register.
\return IPSR Register value
*/
__STATIC_INLINE uint32_t __get_IPSR(void)
{
register uint32_t __regIPSR __ASM("ipsr");
return(__regIPSR);
}
/**
\brief Get APSR Register
\details Returns the content of the APSR Register.
\return APSR Register value
*/
__STATIC_INLINE uint32_t __get_APSR(void)
{
register uint32_t __regAPSR __ASM("apsr");
return(__regAPSR);
}
/**
\brief Get xPSR Register
\details Returns the content of the xPSR Register.
\return xPSR Register value
*/
__STATIC_INLINE uint32_t __get_xPSR(void)
{
register uint32_t __regXPSR __ASM("xpsr");
return(__regXPSR);
}
/**
\brief Get Process Stack Pointer
\details Returns the current value of the Process Stack Pointer (PSP).
\return PSP Register value
*/
__STATIC_INLINE uint32_t __get_PSP(void)
{
register uint32_t __regProcessStackPointer __ASM("psp");
return(__regProcessStackPointer);
}
/**
\brief Set Process Stack Pointer
\details Assigns the given value to the Process Stack Pointer (PSP).
\param [in] topOfProcStack Process Stack Pointer value to set
*/
__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
{
register uint32_t __regProcessStackPointer __ASM("psp");
__regProcessStackPointer = topOfProcStack;
}
/**
\brief Get Main Stack Pointer
\details Returns the current value of the Main Stack Pointer (MSP).
\return MSP Register value
*/
__STATIC_INLINE uint32_t __get_MSP(void)
{
register uint32_t __regMainStackPointer __ASM("msp");
return(__regMainStackPointer);
}
/**
\brief Set Main Stack Pointer
\details Assigns the given value to the Main Stack Pointer (MSP).
\param [in] topOfMainStack Main Stack Pointer value to set
*/
__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
{
register uint32_t __regMainStackPointer __ASM("msp");
__regMainStackPointer = topOfMainStack;
}
/**
\brief Get Priority Mask
\details Returns the current state of the priority mask bit from the Priority Mask Register.
\return Priority Mask value
*/
__STATIC_INLINE uint32_t __get_PRIMASK(void)
{
register uint32_t __regPriMask __ASM("primask");
return(__regPriMask);
}
/**
\brief Set Priority Mask
\details Assigns the given value to the Priority Mask Register.
\param [in] priMask Priority Mask
*/
__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
{
register uint32_t __regPriMask __ASM("primask");
__regPriMask = (priMask);
}
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
/**
\brief Enable FIQ
\details Enables FIQ interrupts by clearing the F-bit in the CPSR.
Can only be executed in Privileged modes.
*/
#define __enable_fault_irq __enable_fiq
/**
\brief Disable FIQ
\details Disables FIQ interrupts by setting the F-bit in the CPSR.
Can only be executed in Privileged modes.
*/
#define __disable_fault_irq __disable_fiq
/**
\brief Get Base Priority
\details Returns the current value of the Base Priority register.
\return Base Priority register value
*/
__STATIC_INLINE uint32_t __get_BASEPRI(void)
{
register uint32_t __regBasePri __ASM("basepri");
return(__regBasePri);
}
/**
\brief Set Base Priority
\details Assigns the given value to the Base Priority register.
\param [in] basePri Base Priority value to set
*/
__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
{
register uint32_t __regBasePri __ASM("basepri");
__regBasePri = (basePri & 0xFFU);
}
/**
\brief Set Base Priority with condition
\details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
or the new value increases the BASEPRI priority level.
\param [in] basePri Base Priority value to set
*/
__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
{
register uint32_t __regBasePriMax __ASM("basepri_max");
__regBasePriMax = (basePri & 0xFFU);
}
/**
\brief Get Fault Mask
\details Returns the current value of the Fault Mask register.
\return Fault Mask register value
*/
__STATIC_INLINE uint32_t __get_FAULTMASK(void)
{
register uint32_t __regFaultMask __ASM("faultmask");
return(__regFaultMask);
}
/**
\brief Set Fault Mask
\details Assigns the given value to the Fault Mask register.
\param [in] faultMask Fault Mask value to set
*/
__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
{
register uint32_t __regFaultMask __ASM("faultmask");
__regFaultMask = (faultMask & (uint32_t)1U);
}
#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
/**
\brief Get FPSCR
\details Returns the current value of the Floating Point Status/Control register.
\return Floating Point Status/Control register value
*/
__STATIC_INLINE uint32_t __get_FPSCR(void)
{
#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) )
register uint32_t __regfpscr __ASM("fpscr");
return(__regfpscr);
#else
return(0U);
#endif
}
/**
\brief Set FPSCR
\details Assigns the given value to the Floating Point Status/Control register.
\param [in] fpscr Floating Point Status/Control value to set
*/
__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
{
#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) )
register uint32_t __regfpscr __ASM("fpscr");
__regfpscr = (fpscr);
#else
(void)fpscr;
#endif
}
/*@} end of CMSIS_Core_RegAccFunctions */
/* ########################## Core Instruction Access ######################### */
/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
Access to dedicated instructions
@{
*/
/**
\brief No Operation
\details No Operation does nothing. This instruction can be used for code alignment purposes.
*/
#define __NOP __nop
/**
\brief Wait For Interrupt
\details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
*/
#define __WFI __wfi
/**
\brief Wait For Event
\details Wait For Event is a hint instruction that permits the processor to enter
a low-power state until one of a number of events occurs.
*/
#define __WFE __wfe
/**
\brief Send Event
\details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
*/
#define __SEV __sev
/**
\brief Instruction Synchronization Barrier
\details Instruction Synchronization Barrier flushes the pipeline in the processor,
so that all instructions following the ISB are fetched from cache or memory,
after the instruction has been completed.
*/
#define __ISB() do {\
__schedule_barrier();\
__isb(0xF);\
__schedule_barrier();\
} while (0U)
/**
\brief Data Synchronization Barrier
\details Acts as a special kind of Data Memory Barrier.
It completes when all explicit memory accesses before this instruction complete.
*/
#define __DSB() do {\
__schedule_barrier();\
__dsb(0xF);\
__schedule_barrier();\
} while (0U)
/**
\brief Data Memory Barrier
\details Ensures the apparent order of the explicit memory operations before
and after the instruction, without ensuring their completion.
*/
#define __DMB() do {\
__schedule_barrier();\
__dmb(0xF);\
__schedule_barrier();\
} while (0U)
/**
\brief Reverse byte order (32 bit)
\details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412.
\param [in] value Value to reverse
\return Reversed value
*/
#define __REV __rev
/**
\brief Reverse byte order (16 bit)
\details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856.
\param [in] value Value to reverse
\return Reversed value
*/
#ifndef __NO_EMBEDDED_ASM
__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
{
rev16 r0, r0
bx lr
}
#endif
/**
\brief Reverse byte order (16 bit)
\details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000.
\param [in] value Value to reverse
\return Reversed value
*/
#ifndef __NO_EMBEDDED_ASM
__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value)
{
revsh r0, r0
bx lr
}
#endif
/**
\brief Rotate Right in unsigned value (32 bit)
\details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
\param [in] op1 Value to rotate
\param [in] op2 Number of Bits to rotate
\return Rotated value
*/
#define __ROR __ror
/**
\brief Breakpoint
\details Causes the processor to enter Debug state.
Debug tools can use this to investigate system state when the instruction at a particular address is reached.
\param [in] value is ignored by the processor.
If required, a debugger can use it to store additional information about the breakpoint.
*/
#define __BKPT(value) __breakpoint(value)
/**
\brief Reverse bit order of value
\details Reverses the bit order of the given value.
\param [in] value Value to reverse
\return Reversed value
*/
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
#define __RBIT __rbit
#else
__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
{
uint32_t result;
uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */
result = value; /* r will be reversed bits of v; first get LSB of v */
for (value >>= 1U; value != 0U; value >>= 1U)
{
result <<= 1U;
result |= value & 1U;
s--;
}
result <<= s; /* shift when v's highest bits are zero */
return result;
}
#endif
/**
\brief Count leading zeros
\details Counts the number of leading zeros of a data value.
\param [in] value Value to count the leading zeros
\return number of leading zeros in value
*/
#define __CLZ __clz
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
/**
\brief LDR Exclusive (8 bit)
\details Executes a exclusive LDR instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
#else
#define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop")
#endif
/**
\brief LDR Exclusive (16 bit)
\details Executes a exclusive LDR instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
#else
#define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop")
#endif
/**
\brief LDR Exclusive (32 bit)
\details Executes a exclusive LDR instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
#else
#define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop")
#endif
/**
\brief STR Exclusive (8 bit)
\details Executes a exclusive STR instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __STREXB(value, ptr) __strex(value, ptr)
#else
#define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
#endif
/**
\brief STR Exclusive (16 bit)
\details Executes a exclusive STR instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __STREXH(value, ptr) __strex(value, ptr)
#else
#define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
#endif
/**
\brief STR Exclusive (32 bit)
\details Executes a exclusive STR instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __STREXW(value, ptr) __strex(value, ptr)
#else
#define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
#endif
/**
\brief Remove the exclusive lock
\details Removes the exclusive lock which is created by LDREX.
*/
#define __CLREX __clrex
/**
\brief Signed Saturate
\details Saturates a signed value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (1..32)
\return Saturated value
*/
#define __SSAT __ssat
/**
\brief Unsigned Saturate
\details Saturates an unsigned value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (0..31)
\return Saturated value
*/
#define __USAT __usat
/**
\brief Rotate Right with Extend (32 bit)
\details Moves each bit of a bitstring right by one bit.
The carry input is shifted in at the left end of the bitstring.
\param [in] value Value to rotate
\return Rotated value
*/
#ifndef __NO_EMBEDDED_ASM
__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
{
rrx r0, r0
bx lr
}
#endif
/**
\brief LDRT Unprivileged (8 bit)
\details Executes a Unprivileged LDRT instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
/**
\brief LDRT Unprivileged (16 bit)
\details Executes a Unprivileged LDRT instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
/**
\brief LDRT Unprivileged (32 bit)
\details Executes a Unprivileged LDRT instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
/**
\brief STRT Unprivileged (8 bit)
\details Executes a Unprivileged STRT instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
#define __STRBT(value, ptr) __strt(value, ptr)
/**
\brief STRT Unprivileged (16 bit)
\details Executes a Unprivileged STRT instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
#define __STRHT(value, ptr) __strt(value, ptr)
/**
\brief STRT Unprivileged (32 bit)
\details Executes a Unprivileged STRT instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
#define __STRT(value, ptr) __strt(value, ptr)
#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
/**
\brief Signed Saturate
\details Saturates a signed value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (1..32)
\return Saturated value
*/
__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
{
if ((sat >= 1U) && (sat <= 32U))
{
const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
const int32_t min = -1 - max ;
if (val > max)
{
return max;
}
else if (val < min)
{
return min;
}
}
return val;
}
/**
\brief Unsigned Saturate
\details Saturates an unsigned value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (0..31)
\return Saturated value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
{
if (sat <= 31U)
{
const uint32_t max = ((1U << sat) - 1U);
if (val > (int32_t)max)
{
return max;
}
else if (val < 0)
{
return 0U;
}
}
return (uint32_t)val;
}
#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
/* ################### Compiler specific Intrinsics ########################### */
/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
Access to dedicated SIMD instructions
@{
*/
#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
#define __SADD8 __sadd8
#define __QADD8 __qadd8
#define __SHADD8 __shadd8
#define __UADD8 __uadd8
#define __UQADD8 __uqadd8
#define __UHADD8 __uhadd8
#define __SSUB8 __ssub8
#define __QSUB8 __qsub8
#define __SHSUB8 __shsub8
#define __USUB8 __usub8
#define __UQSUB8 __uqsub8
#define __UHSUB8 __uhsub8
#define __SADD16 __sadd16
#define __QADD16 __qadd16
#define __SHADD16 __shadd16
#define __UADD16 __uadd16
#define __UQADD16 __uqadd16
#define __UHADD16 __uhadd16
#define __SSUB16 __ssub16
#define __QSUB16 __qsub16
#define __SHSUB16 __shsub16
#define __USUB16 __usub16
#define __UQSUB16 __uqsub16
#define __UHSUB16 __uhsub16
#define __SASX __sasx
#define __QASX __qasx
#define __SHASX __shasx
#define __UASX __uasx
#define __UQASX __uqasx
#define __UHASX __uhasx
#define __SSAX __ssax
#define __QSAX __qsax
#define __SHSAX __shsax
#define __USAX __usax
#define __UQSAX __uqsax
#define __UHSAX __uhsax
#define __USAD8 __usad8
#define __USADA8 __usada8
#define __SSAT16 __ssat16
#define __USAT16 __usat16
#define __UXTB16 __uxtb16
#define __UXTAB16 __uxtab16
#define __SXTB16 __sxtb16
#define __SXTAB16 __sxtab16
#define __SMUAD __smuad
#define __SMUADX __smuadx
#define __SMLAD __smlad
#define __SMLADX __smladx
#define __SMLALD __smlald
#define __SMLALDX __smlaldx
#define __SMUSD __smusd
#define __SMUSDX __smusdx
#define __SMLSD __smlsd
#define __SMLSDX __smlsdx
#define __SMLSLD __smlsld
#define __SMLSLDX __smlsldx
#define __SEL __sel
#define __QADD __qadd
#define __QSUB __qsub
#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
((int64_t)(ARG3) << 32U) ) >> 32U))
#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
/*@} end of group CMSIS_SIMD_intrinsics */
#endif /* __CMSIS_ARMCC_H */

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,283 @@
/**************************************************************************//**
* @file cmsis_compiler.h
* @brief CMSIS compiler generic header file
* @version V5.1.0
* @date 09. October 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __CMSIS_COMPILER_H
#define __CMSIS_COMPILER_H
#include <stdint.h>
/*
* Arm Compiler 4/5
*/
#if defined ( __CC_ARM )
#include "cmsis_armcc.h"
/*
* Arm Compiler 6.6 LTM (armclang)
*/
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) && (__ARMCC_VERSION < 6100100)
#include "cmsis_armclang_ltm.h"
/*
* Arm Compiler above 6.10.1 (armclang)
*/
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6100100)
#include "cmsis_armclang.h"
/*
* GNU Compiler
*/
#elif defined ( __GNUC__ )
#include "cmsis_gcc.h"
/*
* IAR Compiler
*/
#elif defined ( __ICCARM__ )
#include <cmsis_iccarm.h>
/*
* TI Arm Compiler
*/
#elif defined ( __TI_ARM__ )
#include <cmsis_ccs.h>
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __STATIC_INLINE
#endif
#ifndef __NO_RETURN
#define __NO_RETURN __attribute__((noreturn))
#endif
#ifndef __USED
#define __USED __attribute__((used))
#endif
#ifndef __WEAK
#define __WEAK __attribute__((weak))
#endif
#ifndef __PACKED
#define __PACKED __attribute__((packed))
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT struct __attribute__((packed))
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION union __attribute__((packed))
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
struct __attribute__((packed)) T_UINT32 { uint32_t v; };
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
#endif
#ifndef __ALIGNED
#define __ALIGNED(x) __attribute__((aligned(x)))
#endif
#ifndef __RESTRICT
#define __RESTRICT __restrict
#endif
#ifndef __COMPILER_BARRIER
#warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored.
#define __COMPILER_BARRIER() (void)0
#endif
/*
* TASKING Compiler
*/
#elif defined ( __TASKING__ )
/*
* The CMSIS functions have been implemented as intrinsics in the compiler.
* Please use "carm -?i" to get an up to date list of all intrinsics,
* Including the CMSIS ones.
*/
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __STATIC_INLINE
#endif
#ifndef __NO_RETURN
#define __NO_RETURN __attribute__((noreturn))
#endif
#ifndef __USED
#define __USED __attribute__((used))
#endif
#ifndef __WEAK
#define __WEAK __attribute__((weak))
#endif
#ifndef __PACKED
#define __PACKED __packed__
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT struct __packed__
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION union __packed__
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
struct __packed__ T_UINT32 { uint32_t v; };
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
#endif
#ifndef __ALIGNED
#define __ALIGNED(x) __align(x)
#endif
#ifndef __RESTRICT
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
#define __RESTRICT
#endif
#ifndef __COMPILER_BARRIER
#warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored.
#define __COMPILER_BARRIER() (void)0
#endif
/*
* COSMIC Compiler
*/
#elif defined ( __CSMC__ )
#include <cmsis_csm.h>
#ifndef __ASM
#define __ASM _asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __STATIC_INLINE
#endif
#ifndef __NO_RETURN
// NO RETURN is automatically detected hence no warning here
#define __NO_RETURN
#endif
#ifndef __USED
#warning No compiler specific solution for __USED. __USED is ignored.
#define __USED
#endif
#ifndef __WEAK
#define __WEAK __weak
#endif
#ifndef __PACKED
#define __PACKED @packed
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT @packed struct
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION @packed union
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
@packed struct T_UINT32 { uint32_t v; };
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
#endif
#ifndef __ALIGNED
#warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored.
#define __ALIGNED(x)
#endif
#ifndef __RESTRICT
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
#define __RESTRICT
#endif
#ifndef __COMPILER_BARRIER
#warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored.
#define __COMPILER_BARRIER() (void)0
#endif
#else
#error Unknown compiler.
#endif
#endif /* __CMSIS_COMPILER_H */

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,964 @@
/**************************************************************************//**
* @file cmsis_iccarm.h
* @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file
* @version V5.1.0
* @date 08. May 2019
******************************************************************************/
//------------------------------------------------------------------------------
//
// Copyright (c) 2017-2019 IAR Systems
// Copyright (c) 2017-2019 Arm Limited. All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License")
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
//------------------------------------------------------------------------------
#ifndef __CMSIS_ICCARM_H__
#define __CMSIS_ICCARM_H__
#ifndef __ICCARM__
#error This file should only be compiled by ICCARM
#endif
#pragma system_include
#define __IAR_FT _Pragma("inline=forced") __intrinsic
#if (__VER__ >= 8000000)
#define __ICCARM_V8 1
#else
#define __ICCARM_V8 0
#endif
#ifndef __ALIGNED
#if __ICCARM_V8
#define __ALIGNED(x) __attribute__((aligned(x)))
#elif (__VER__ >= 7080000)
/* Needs IAR language extensions */
#define __ALIGNED(x) __attribute__((aligned(x)))
#else
#warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored.
#define __ALIGNED(x)
#endif
#endif
/* Define compiler macros for CPU architecture, used in CMSIS 5.
*/
#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__
/* Macros already defined */
#else
#if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__)
#define __ARM_ARCH_8M_MAIN__ 1
#elif defined(__ARM8M_BASELINE__)
#define __ARM_ARCH_8M_BASE__ 1
#elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M'
#if __ARM_ARCH == 6
#define __ARM_ARCH_6M__ 1
#elif __ARM_ARCH == 7
#if __ARM_FEATURE_DSP
#define __ARM_ARCH_7EM__ 1
#else
#define __ARM_ARCH_7M__ 1
#endif
#endif /* __ARM_ARCH */
#endif /* __ARM_ARCH_PROFILE == 'M' */
#endif
/* Alternativ core deduction for older ICCARM's */
#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \
!defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__)
#if defined(__ARM6M__) && (__CORE__ == __ARM6M__)
#define __ARM_ARCH_6M__ 1
#elif defined(__ARM7M__) && (__CORE__ == __ARM7M__)
#define __ARM_ARCH_7M__ 1
#elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__)
#define __ARM_ARCH_7EM__ 1
#elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__)
#define __ARM_ARCH_8M_BASE__ 1
#elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__)
#define __ARM_ARCH_8M_MAIN__ 1
#elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__)
#define __ARM_ARCH_8M_MAIN__ 1
#else
#error "Unknown target."
#endif
#endif
#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1
#define __IAR_M0_FAMILY 1
#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1
#define __IAR_M0_FAMILY 1
#else
#define __IAR_M0_FAMILY 0
#endif
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __COMPILER_BARRIER
#define __COMPILER_BARRIER() __ASM volatile("":::"memory")
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __NO_RETURN
#if __ICCARM_V8
#define __NO_RETURN __attribute__((__noreturn__))
#else
#define __NO_RETURN _Pragma("object_attribute=__noreturn")
#endif
#endif
#ifndef __PACKED
#if __ICCARM_V8
#define __PACKED __attribute__((packed, aligned(1)))
#else
/* Needs IAR language extensions */
#define __PACKED __packed
#endif
#endif
#ifndef __PACKED_STRUCT
#if __ICCARM_V8
#define __PACKED_STRUCT struct __attribute__((packed, aligned(1)))
#else
/* Needs IAR language extensions */
#define __PACKED_STRUCT __packed struct
#endif
#endif
#ifndef __PACKED_UNION
#if __ICCARM_V8
#define __PACKED_UNION union __attribute__((packed, aligned(1)))
#else
/* Needs IAR language extensions */
#define __PACKED_UNION __packed union
#endif
#endif
#ifndef __RESTRICT
#if __ICCARM_V8
#define __RESTRICT __restrict
#else
/* Needs IAR language extensions */
#define __RESTRICT restrict
#endif
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __FORCEINLINE
#define __FORCEINLINE _Pragma("inline=forced")
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE
#endif
#ifndef __UNALIGNED_UINT16_READ
#pragma language=save
#pragma language=extended
__IAR_FT uint16_t __iar_uint16_read(void const *ptr)
{
return *(__packed uint16_t*)(ptr);
}
#pragma language=restore
#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
#pragma language=save
#pragma language=extended
__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val)
{
*(__packed uint16_t*)(ptr) = val;;
}
#pragma language=restore
#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL)
#endif
#ifndef __UNALIGNED_UINT32_READ
#pragma language=save
#pragma language=extended
__IAR_FT uint32_t __iar_uint32_read(void const *ptr)
{
return *(__packed uint32_t*)(ptr);
}
#pragma language=restore
#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
#pragma language=save
#pragma language=extended
__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val)
{
*(__packed uint32_t*)(ptr) = val;;
}
#pragma language=restore
#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL)
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
#pragma language=save
#pragma language=extended
__packed struct __iar_u32 { uint32_t v; };
#pragma language=restore
#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v)
#endif
#ifndef __USED
#if __ICCARM_V8
#define __USED __attribute__((used))
#else
#define __USED _Pragma("__root")
#endif
#endif
#ifndef __WEAK
#if __ICCARM_V8
#define __WEAK __attribute__((weak))
#else
#define __WEAK _Pragma("__weak")
#endif
#endif
#ifndef __PROGRAM_START
#define __PROGRAM_START __iar_program_start
#endif
#ifndef __INITIAL_SP
#define __INITIAL_SP CSTACK$$Limit
#endif
#ifndef __STACK_LIMIT
#define __STACK_LIMIT CSTACK$$Base
#endif
#ifndef __VECTOR_TABLE
#define __VECTOR_TABLE __vector_table
#endif
#ifndef __VECTOR_TABLE_ATTRIBUTE
#define __VECTOR_TABLE_ATTRIBUTE @".intvec"
#endif
#ifndef __ICCARM_INTRINSICS_VERSION__
#define __ICCARM_INTRINSICS_VERSION__ 0
#endif
#if __ICCARM_INTRINSICS_VERSION__ == 2
#if defined(__CLZ)
#undef __CLZ
#endif
#if defined(__REVSH)
#undef __REVSH
#endif
#if defined(__RBIT)
#undef __RBIT
#endif
#if defined(__SSAT)
#undef __SSAT
#endif
#if defined(__USAT)
#undef __USAT
#endif
#include "iccarm_builtin.h"
#define __disable_fault_irq __iar_builtin_disable_fiq
#define __disable_irq __iar_builtin_disable_interrupt
#define __enable_fault_irq __iar_builtin_enable_fiq
#define __enable_irq __iar_builtin_enable_interrupt
#define __arm_rsr __iar_builtin_rsr
#define __arm_wsr __iar_builtin_wsr
#define __get_APSR() (__arm_rsr("APSR"))
#define __get_BASEPRI() (__arm_rsr("BASEPRI"))
#define __get_CONTROL() (__arm_rsr("CONTROL"))
#define __get_FAULTMASK() (__arm_rsr("FAULTMASK"))
#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) )
#define __get_FPSCR() (__arm_rsr("FPSCR"))
#define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE)))
#else
#define __get_FPSCR() ( 0 )
#define __set_FPSCR(VALUE) ((void)VALUE)
#endif
#define __get_IPSR() (__arm_rsr("IPSR"))
#define __get_MSP() (__arm_rsr("MSP"))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure MSPLIM is RAZ/WI
#define __get_MSPLIM() (0U)
#else
#define __get_MSPLIM() (__arm_rsr("MSPLIM"))
#endif
#define __get_PRIMASK() (__arm_rsr("PRIMASK"))
#define __get_PSP() (__arm_rsr("PSP"))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
#define __get_PSPLIM() (0U)
#else
#define __get_PSPLIM() (__arm_rsr("PSPLIM"))
#endif
#define __get_xPSR() (__arm_rsr("xPSR"))
#define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE)))
#define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE)))
#define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE)))
#define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE)))
#define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE)))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure MSPLIM is RAZ/WI
#define __set_MSPLIM(VALUE) ((void)(VALUE))
#else
#define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE)))
#endif
#define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE)))
#define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE)))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
#define __set_PSPLIM(VALUE) ((void)(VALUE))
#else
#define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE)))
#endif
#define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS"))
#define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE)))
#define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS"))
#define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE)))
#define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS"))
#define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE)))
#define __TZ_get_SP_NS() (__arm_rsr("SP_NS"))
#define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE)))
#define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS"))
#define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE)))
#define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS"))
#define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE)))
#define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS"))
#define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE)))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
#define __TZ_get_PSPLIM_NS() (0U)
#define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE))
#else
#define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS"))
#define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE)))
#endif
#define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS"))
#define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE)))
#define __NOP __iar_builtin_no_operation
#define __CLZ __iar_builtin_CLZ
#define __CLREX __iar_builtin_CLREX
#define __DMB __iar_builtin_DMB
#define __DSB __iar_builtin_DSB
#define __ISB __iar_builtin_ISB
#define __LDREXB __iar_builtin_LDREXB
#define __LDREXH __iar_builtin_LDREXH
#define __LDREXW __iar_builtin_LDREX
#define __RBIT __iar_builtin_RBIT
#define __REV __iar_builtin_REV
#define __REV16 __iar_builtin_REV16
__IAR_FT int16_t __REVSH(int16_t val)
{
return (int16_t) __iar_builtin_REVSH(val);
}
#define __ROR __iar_builtin_ROR
#define __RRX __iar_builtin_RRX
#define __SEV __iar_builtin_SEV
#if !__IAR_M0_FAMILY
#define __SSAT __iar_builtin_SSAT
#endif
#define __STREXB __iar_builtin_STREXB
#define __STREXH __iar_builtin_STREXH
#define __STREXW __iar_builtin_STREX
#if !__IAR_M0_FAMILY
#define __USAT __iar_builtin_USAT
#endif
#define __WFE __iar_builtin_WFE
#define __WFI __iar_builtin_WFI
#if __ARM_MEDIA__
#define __SADD8 __iar_builtin_SADD8
#define __QADD8 __iar_builtin_QADD8
#define __SHADD8 __iar_builtin_SHADD8
#define __UADD8 __iar_builtin_UADD8
#define __UQADD8 __iar_builtin_UQADD8
#define __UHADD8 __iar_builtin_UHADD8
#define __SSUB8 __iar_builtin_SSUB8
#define __QSUB8 __iar_builtin_QSUB8
#define __SHSUB8 __iar_builtin_SHSUB8
#define __USUB8 __iar_builtin_USUB8
#define __UQSUB8 __iar_builtin_UQSUB8
#define __UHSUB8 __iar_builtin_UHSUB8
#define __SADD16 __iar_builtin_SADD16
#define __QADD16 __iar_builtin_QADD16
#define __SHADD16 __iar_builtin_SHADD16
#define __UADD16 __iar_builtin_UADD16
#define __UQADD16 __iar_builtin_UQADD16
#define __UHADD16 __iar_builtin_UHADD16
#define __SSUB16 __iar_builtin_SSUB16
#define __QSUB16 __iar_builtin_QSUB16
#define __SHSUB16 __iar_builtin_SHSUB16
#define __USUB16 __iar_builtin_USUB16
#define __UQSUB16 __iar_builtin_UQSUB16
#define __UHSUB16 __iar_builtin_UHSUB16
#define __SASX __iar_builtin_SASX
#define __QASX __iar_builtin_QASX
#define __SHASX __iar_builtin_SHASX
#define __UASX __iar_builtin_UASX
#define __UQASX __iar_builtin_UQASX
#define __UHASX __iar_builtin_UHASX
#define __SSAX __iar_builtin_SSAX
#define __QSAX __iar_builtin_QSAX
#define __SHSAX __iar_builtin_SHSAX
#define __USAX __iar_builtin_USAX
#define __UQSAX __iar_builtin_UQSAX
#define __UHSAX __iar_builtin_UHSAX
#define __USAD8 __iar_builtin_USAD8
#define __USADA8 __iar_builtin_USADA8
#define __SSAT16 __iar_builtin_SSAT16
#define __USAT16 __iar_builtin_USAT16
#define __UXTB16 __iar_builtin_UXTB16
#define __UXTAB16 __iar_builtin_UXTAB16
#define __SXTB16 __iar_builtin_SXTB16
#define __SXTAB16 __iar_builtin_SXTAB16
#define __SMUAD __iar_builtin_SMUAD
#define __SMUADX __iar_builtin_SMUADX
#define __SMMLA __iar_builtin_SMMLA
#define __SMLAD __iar_builtin_SMLAD
#define __SMLADX __iar_builtin_SMLADX
#define __SMLALD __iar_builtin_SMLALD
#define __SMLALDX __iar_builtin_SMLALDX
#define __SMUSD __iar_builtin_SMUSD
#define __SMUSDX __iar_builtin_SMUSDX
#define __SMLSD __iar_builtin_SMLSD
#define __SMLSDX __iar_builtin_SMLSDX
#define __SMLSLD __iar_builtin_SMLSLD
#define __SMLSLDX __iar_builtin_SMLSLDX
#define __SEL __iar_builtin_SEL
#define __QADD __iar_builtin_QADD
#define __QSUB __iar_builtin_QSUB
#define __PKHBT __iar_builtin_PKHBT
#define __PKHTB __iar_builtin_PKHTB
#endif
#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */
#if __IAR_M0_FAMILY
/* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
#define __CLZ __cmsis_iar_clz_not_active
#define __SSAT __cmsis_iar_ssat_not_active
#define __USAT __cmsis_iar_usat_not_active
#define __RBIT __cmsis_iar_rbit_not_active
#define __get_APSR __cmsis_iar_get_APSR_not_active
#endif
#if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) ))
#define __get_FPSCR __cmsis_iar_get_FPSR_not_active
#define __set_FPSCR __cmsis_iar_set_FPSR_not_active
#endif
#ifdef __INTRINSICS_INCLUDED
#error intrinsics.h is already included previously!
#endif
#include <intrinsics.h>
#if __IAR_M0_FAMILY
/* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
#undef __CLZ
#undef __SSAT
#undef __USAT
#undef __RBIT
#undef __get_APSR
__STATIC_INLINE uint8_t __CLZ(uint32_t data)
{
if (data == 0U) { return 32U; }
uint32_t count = 0U;
uint32_t mask = 0x80000000U;
while ((data & mask) == 0U)
{
count += 1U;
mask = mask >> 1U;
}
return count;
}
__STATIC_INLINE uint32_t __RBIT(uint32_t v)
{
uint8_t sc = 31U;
uint32_t r = v;
for (v >>= 1U; v; v >>= 1U)
{
r <<= 1U;
r |= v & 1U;
sc--;
}
return (r << sc);
}
__STATIC_INLINE uint32_t __get_APSR(void)
{
uint32_t res;
__asm("MRS %0,APSR" : "=r" (res));
return res;
}
#endif
#if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) ))
#undef __get_FPSCR
#undef __set_FPSCR
#define __get_FPSCR() (0)
#define __set_FPSCR(VALUE) ((void)VALUE)
#endif
#pragma diag_suppress=Pe940
#pragma diag_suppress=Pe177
#define __enable_irq __enable_interrupt
#define __disable_irq __disable_interrupt
#define __NOP __no_operation
#define __get_xPSR __get_PSR
#if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0)
__IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr)
{
return __LDREX((unsigned long *)ptr);
}
__IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr)
{
return __STREX(value, (unsigned long *)ptr);
}
#endif
/* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
#if (__CORTEX_M >= 0x03)
__IAR_FT uint32_t __RRX(uint32_t value)
{
uint32_t result;
__ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc");
return(result);
}
__IAR_FT void __set_BASEPRI_MAX(uint32_t value)
{
__asm volatile("MSR BASEPRI_MAX,%0"::"r" (value));
}
#define __enable_fault_irq __enable_fiq
#define __disable_fault_irq __disable_fiq
#endif /* (__CORTEX_M >= 0x03) */
__IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2)
{
return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2));
}
#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
(defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) )
__IAR_FT uint32_t __get_MSPLIM(void)
{
uint32_t res;
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure MSPLIM is RAZ/WI
res = 0U;
#else
__asm volatile("MRS %0,MSPLIM" : "=r" (res));
#endif
return res;
}
__IAR_FT void __set_MSPLIM(uint32_t value)
{
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure MSPLIM is RAZ/WI
(void)value;
#else
__asm volatile("MSR MSPLIM,%0" :: "r" (value));
#endif
}
__IAR_FT uint32_t __get_PSPLIM(void)
{
uint32_t res;
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
res = 0U;
#else
__asm volatile("MRS %0,PSPLIM" : "=r" (res));
#endif
return res;
}
__IAR_FT void __set_PSPLIM(uint32_t value)
{
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
(void)value;
#else
__asm volatile("MSR PSPLIM,%0" :: "r" (value));
#endif
}
__IAR_FT uint32_t __TZ_get_CONTROL_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,CONTROL_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_CONTROL_NS(uint32_t value)
{
__asm volatile("MSR CONTROL_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_PSP_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,PSP_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_PSP_NS(uint32_t value)
{
__asm volatile("MSR PSP_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_MSP_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,MSP_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_MSP_NS(uint32_t value)
{
__asm volatile("MSR MSP_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_SP_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,SP_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_SP_NS(uint32_t value)
{
__asm volatile("MSR SP_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_PRIMASK_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,PRIMASK_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value)
{
__asm volatile("MSR PRIMASK_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_BASEPRI_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,BASEPRI_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value)
{
__asm volatile("MSR BASEPRI_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value)
{
__asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_PSPLIM_NS(void)
{
uint32_t res;
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
res = 0U;
#else
__asm volatile("MRS %0,PSPLIM_NS" : "=r" (res));
#endif
return res;
}
__IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value)
{
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
(void)value;
#else
__asm volatile("MSR PSPLIM_NS,%0" :: "r" (value));
#endif
}
__IAR_FT uint32_t __TZ_get_MSPLIM_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,MSPLIM_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value)
{
__asm volatile("MSR MSPLIM_NS,%0" :: "r" (value));
}
#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */
#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value))
#if __IAR_M0_FAMILY
__STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
{
if ((sat >= 1U) && (sat <= 32U))
{
const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
const int32_t min = -1 - max ;
if (val > max)
{
return max;
}
else if (val < min)
{
return min;
}
}
return val;
}
__STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
{
if (sat <= 31U)
{
const uint32_t max = ((1U << sat) - 1U);
if (val > (int32_t)max)
{
return max;
}
else if (val < 0)
{
return 0U;
}
}
return (uint32_t)val;
}
#endif
#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
__IAR_FT uint8_t __LDRBT(volatile uint8_t *addr)
{
uint32_t res;
__ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
return ((uint8_t)res);
}
__IAR_FT uint16_t __LDRHT(volatile uint16_t *addr)
{
uint32_t res;
__ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
return ((uint16_t)res);
}
__IAR_FT uint32_t __LDRT(volatile uint32_t *addr)
{
uint32_t res;
__ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
return res;
}
__IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr)
{
__ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
}
__IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr)
{
__ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
}
__IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr)
{
__ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory");
}
#endif /* (__CORTEX_M >= 0x03) */
#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
(defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) )
__IAR_FT uint8_t __LDAB(volatile uint8_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return ((uint8_t)res);
}
__IAR_FT uint16_t __LDAH(volatile uint16_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return ((uint16_t)res);
}
__IAR_FT uint32_t __LDA(volatile uint32_t *ptr)
{
uint32_t res;
__ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return res;
}
__IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr)
{
__ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
}
__IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr)
{
__ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
}
__IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr)
{
__ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
}
__IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return ((uint8_t)res);
}
__IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return ((uint16_t)res);
}
__IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return res;
}
__IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr)
{
uint32_t res;
__ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
return res;
}
__IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr)
{
uint32_t res;
__ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
return res;
}
__IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr)
{
uint32_t res;
__ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
return res;
}
#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
#undef __IAR_FT
#undef __IAR_M0_FAMILY
#undef __ICCARM_V8
#pragma diag_default=Pe940
#pragma diag_default=Pe177
#endif /* __CMSIS_ICCARM_H__ */

View File

@ -0,0 +1,39 @@
/**************************************************************************//**
* @file cmsis_version.h
* @brief CMSIS Core(M) Version definitions
* @version V5.0.3
* @date 24. June 2019
******************************************************************************/
/*
* Copyright (c) 2009-2019 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CMSIS_VERSION_H
#define __CMSIS_VERSION_H
/* CMSIS Version definitions */
#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */
#define __CM_CMSIS_VERSION_SUB ( 3U) /*!< [15:0] CMSIS Core(M) sub version */
#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \
__CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */
#endif

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,952 @@
/**************************************************************************//**
* @file core_cm0.h
* @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
* @version V5.0.6
* @date 13. March 2019
******************************************************************************/
/*
* Copyright (c) 2009-2019 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CORE_CM0_H_GENERIC
#define __CORE_CM0_H_GENERIC
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
CMSIS violates the following MISRA-C:2004 rules:
\li Required Rule 8.5, object/function definition in header file.<br>
Function definitions in header files are used to allow 'inlining'.
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
Unions are used for effective representation of core registers.
\li Advisory Rule 19.7, Function-like macro defined.<br>
Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
/**
\ingroup Cortex_M0
@{
*/
#include "cmsis_version.h"
/* CMSIS CM0 definitions */
#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */
#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */
#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
__CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */
#define __CORTEX_M (0U) /*!< Cortex-M Core */
/** __FPU_USED indicates whether an FPU is used or not.
This core does not support an FPU at all
*/
#define __FPU_USED 0U
#if defined ( __CC_ARM )
#if defined __TARGET_FPU_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#if defined __ARM_FP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __GNUC__ )
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __ICCARM__ )
#if defined __ARMVFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TI_ARM__ )
#if defined __TI_VFP_SUPPORT__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TASKING__ )
#if defined __FPU_VFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __CSMC__ )
#if ( __CSMC__ & 0x400U)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#endif
#include "cmsis_compiler.h" /* CMSIS compiler specific defines */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM0_H_GENERIC */
#ifndef __CMSIS_GENERIC
#ifndef __CORE_CM0_H_DEPENDANT
#define __CORE_CM0_H_DEPENDANT
#ifdef __cplusplus
extern "C" {
#endif
/* check device defines and use defaults */
#if defined __CHECK_DEVICE_DEFINES
#ifndef __CM0_REV
#define __CM0_REV 0x0000U
#warning "__CM0_REV not defined in device header file; using default!"
#endif
#ifndef __NVIC_PRIO_BITS
#define __NVIC_PRIO_BITS 2U
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
#endif
#ifndef __Vendor_SysTickConfig
#define __Vendor_SysTickConfig 0U
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
#endif
#endif
/* IO definitions (access restrictions to peripheral registers) */
/**
\defgroup CMSIS_glob_defs CMSIS Global Defines
<strong>IO Type Qualifiers</strong> are used
\li to specify the access to peripheral variables.
\li for automatic generation of peripheral register debug information.
*/
#ifdef __cplusplus
#define __I volatile /*!< Defines 'read only' permissions */
#else
#define __I volatile const /*!< Defines 'read only' permissions */
#endif
#define __O volatile /*!< Defines 'write only' permissions */
#define __IO volatile /*!< Defines 'read / write' permissions */
/* following defines should be used for structure members */
#define __IM volatile const /*! Defines 'read only' structure member permissions */
#define __OM volatile /*! Defines 'write only' structure member permissions */
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
/*@} end of group Cortex_M0 */
/*******************************************************************************
* Register Abstraction
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
******************************************************************************/
/**
\defgroup CMSIS_core_register Defines and Type Definitions
\brief Type definitions and defines for Cortex-M processor based devices.
*/
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CORE Status and Control Registers
\brief Core Register type definitions.
@{
*/
/**
\brief Union type to access the Application Program Status Register (APSR).
*/
typedef union
{
struct
{
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} APSR_Type;
/* APSR Register Definitions */
#define APSR_N_Pos 31U /*!< APSR: N Position */
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
#define APSR_C_Pos 29U /*!< APSR: C Position */
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
#define APSR_V_Pos 28U /*!< APSR: V Position */
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
/**
\brief Union type to access the Interrupt Program Status Register (IPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} IPSR_Type;
/* IPSR Register Definitions */
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
/**
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} xPSR_Type;
/* xPSR Register Definitions */
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
/**
\brief Union type to access the Control Registers (CONTROL).
*/
typedef union
{
struct
{
uint32_t _reserved0:1; /*!< bit: 0 Reserved */
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} CONTROL_Type;
/* CONTROL Register Definitions */
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
/*@} end of group CMSIS_CORE */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
\brief Type definitions for the NVIC Registers
@{
*/
/**
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
*/
typedef struct
{
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
uint32_t RESERVED0[31U];
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
uint32_t RESERVED1[31U];
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
uint32_t RESERVED2[31U];
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31U];
uint32_t RESERVED4[64U];
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SCB System Control Block (SCB)
\brief Type definitions for the System Control Block Registers
@{
*/
/**
\brief Structure type to access the System Control Block (SCB).
*/
typedef struct
{
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
uint32_t RESERVED0;
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
uint32_t RESERVED1;
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
/* SCB Interrupt Control State Register Definitions */
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
/* SCB Application Interrupt and Reset Control Register Definitions */
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
/* SCB System Control Register Definitions */
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
/* SCB Configuration Control Register Definitions */
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
/* SCB System Handler Control and State Register Definitions */
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
/*@} end of group CMSIS_SCB */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
\brief Type definitions for the System Timer Registers.
@{
*/
/**
\brief Structure type to access the System Timer (SysTick).
*/
typedef struct
{
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
} SysTick_Type;
/* SysTick Control / Status Register Definitions */
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
/* SysTick Reload Register Definitions */
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
/* SysTick Current Register Definitions */
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
/* SysTick Calibration Register Definitions */
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
/*@} end of group CMSIS_SysTick */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
\brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
Therefore they are not covered by the Cortex-M0 header file.
@{
*/
/*@} end of group CMSIS_CoreDebug */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_bitfield Core register bit field macros
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
@{
*/
/**
\brief Mask and shift a bit field value for use in a register bit range.
\param[in] field Name of the register bit field.
\param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type.
\return Masked and shifted value.
*/
#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
/**
\brief Mask and shift a register value to extract a bit filed value.
\param[in] field Name of the register bit field.
\param[in] value Value of register. This parameter is interpreted as an uint32_t type.
\return Masked and shifted bit field value.
*/
#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
/*@} end of group CMSIS_core_bitfield */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_base Core Definitions
\brief Definitions for base addresses, unions, and structures.
@{
*/
/* Memory mapping of Core Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
/*@} */
/*******************************************************************************
* Hardware Abstraction Layer
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
******************************************************************************/
/**
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
\brief Functions that manage interrupts and exceptions via the NVIC.
@{
*/
#ifdef CMSIS_NVIC_VIRTUAL
#ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
#define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
#endif
#include CMSIS_NVIC_VIRTUAL_HEADER_FILE
#else
#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping
#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping
#define NVIC_EnableIRQ __NVIC_EnableIRQ
#define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ
#define NVIC_DisableIRQ __NVIC_DisableIRQ
#define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ
#define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ
#define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ
/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */
#define NVIC_SetPriority __NVIC_SetPriority
#define NVIC_GetPriority __NVIC_GetPriority
#define NVIC_SystemReset __NVIC_SystemReset
#endif /* CMSIS_NVIC_VIRTUAL */
#ifdef CMSIS_VECTAB_VIRTUAL
#ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
#define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
#endif
#include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
#else
#define NVIC_SetVector __NVIC_SetVector
#define NVIC_GetVector __NVIC_GetVector
#endif /* (CMSIS_VECTAB_VIRTUAL) */
#define NVIC_USER_IRQ_OFFSET 16
/* The following EXC_RETURN values are saved the LR on exception entry */
#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */
#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */
#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */
/* Interrupt Priorities are WORD accessible only under Armv6-M */
/* The following MACROS handle generation of the register offset and byte masks */
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
#define __NVIC_SetPriorityGrouping(X) (void)(X)
#define __NVIC_GetPriorityGrouping() (0U)
/**
\brief Enable Interrupt
\details Enables a device specific interrupt in the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
__COMPILER_BARRIER();
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
__COMPILER_BARRIER();
}
}
/**
\brief Get Interrupt Enable status
\details Returns a device specific interrupt enable status from the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\return 0 Interrupt is not enabled.
\return 1 Interrupt is enabled.
\note IRQn must not be negative.
*/
__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
else
{
return(0U);
}
}
/**
\brief Disable Interrupt
\details Disables a device specific interrupt in the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
__DSB();
__ISB();
}
}
/**
\brief Get Pending Interrupt
\details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
\param [in] IRQn Device specific interrupt number.
\return 0 Interrupt status is not pending.
\return 1 Interrupt status is pending.
\note IRQn must not be negative.
*/
__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
else
{
return(0U);
}
}
/**
\brief Set Pending Interrupt
\details Sets the pending bit of a device specific interrupt in the NVIC pending register.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Clear Pending Interrupt
\details Clears the pending bit of a device specific interrupt in the NVIC pending register.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Set Interrupt Priority
\details Sets the priority of a device specific interrupt or a processor exception.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\param [in] priority Priority to set.
\note The priority cannot be set for every processor exception.
*/
__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
else
{
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
}
/**
\brief Get Interrupt Priority
\details Reads the priority of a device specific interrupt or a processor exception.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\return Interrupt Priority.
Value is aligned automatically to the implemented priority bits of the microcontroller.
*/
__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
else
{
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
}
/**
\brief Encode Priority
\details Encodes the priority for an interrupt with the given priority group,
preemptive priority value, and subpriority value.
In case of a conflict between priority grouping and available
priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
\param [in] PriorityGroup Used priority group.
\param [in] PreemptPriority Preemptive priority value (starting from 0).
\param [in] SubPriority Subpriority value (starting from 0).
\return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
*/
__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
return (
((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
);
}
/**
\brief Decode Priority
\details Decodes an interrupt priority value with a given priority group to
preemptive priority value and subpriority value.
In case of a conflict between priority grouping and available
priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
\param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
\param [in] PriorityGroup Used priority group.
\param [out] pPreemptPriority Preemptive priority value (starting from 0).
\param [out] pSubPriority Subpriority value (starting from 0).
*/
__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
*pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
*pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
}
/**
\brief Set Interrupt Vector
\details Sets an interrupt vector in SRAM based interrupt vector table.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
Address 0 must be mapped to SRAM.
\param [in] IRQn Interrupt number
\param [in] vector Address of interrupt handler function
*/
__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
{
uint32_t vectors = 0x0U;
(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector;
/* ARM Application Note 321 states that the M0 does not require the architectural barrier */
}
/**
\brief Get Interrupt Vector
\details Reads an interrupt vector from interrupt vector table.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\return Address of interrupt handler function
*/
__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
{
uint32_t vectors = 0x0U;
return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4));
}
/**
\brief System Reset
\details Initiates a system reset request to reset the MCU.
*/
__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
buffered write are completed before reset */
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
__DSB(); /* Ensure completion of memory access */
for(;;) /* wait until reset */
{
__NOP();
}
}
/*@} end of CMSIS_Core_NVICFunctions */
/* ########################## FPU functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_FpuFunctions FPU Functions
\brief Function that provides FPU type.
@{
*/
/**
\brief get FPU type
\details returns the FPU type
\returns
- \b 0: No FPU
- \b 1: Single precision FPU
- \b 2: Double + Single precision FPU
*/
__STATIC_INLINE uint32_t SCB_GetFPUType(void)
{
return 0U; /* No FPU */
}
/*@} end of CMSIS_Core_FpuFunctions */
/* ################################## SysTick function ############################################ */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
\brief Functions that configure the System.
@{
*/
#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
/**
\brief System Tick Configuration
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
Counter is in free running mode to generate periodic interrupts.
\param [in] ticks Number of ticks between two interrupts.
\return 0 Function succeeded.
\return 1 Function failed.
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
must contain a vendor-specific implementation of this function.
*/
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
{
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
{
return (1UL); /* Reload value impossible */
}
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0UL); /* Function successful */
}
#endif
/*@} end of CMSIS_Core_SysTickFunctions */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM0_H_DEPENDANT */
#endif /* __CMSIS_GENERIC */

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,979 @@
/**************************************************************************//**
* @file core_cm1.h
* @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File
* @version V1.0.1
* @date 12. November 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CORE_CM1_H_GENERIC
#define __CORE_CM1_H_GENERIC
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
CMSIS violates the following MISRA-C:2004 rules:
\li Required Rule 8.5, object/function definition in header file.<br>
Function definitions in header files are used to allow 'inlining'.
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
Unions are used for effective representation of core registers.
\li Advisory Rule 19.7, Function-like macro defined.<br>
Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
/**
\ingroup Cortex_M1
@{
*/
#include "cmsis_version.h"
/* CMSIS CM1 definitions */
#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */
#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */
#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \
__CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */
#define __CORTEX_M (1U) /*!< Cortex-M Core */
/** __FPU_USED indicates whether an FPU is used or not.
This core does not support an FPU at all
*/
#define __FPU_USED 0U
#if defined ( __CC_ARM )
#if defined __TARGET_FPU_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#if defined __ARM_FP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __GNUC__ )
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __ICCARM__ )
#if defined __ARMVFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TI_ARM__ )
#if defined __TI_VFP_SUPPORT__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TASKING__ )
#if defined __FPU_VFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __CSMC__ )
#if ( __CSMC__ & 0x400U)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#endif
#include "cmsis_compiler.h" /* CMSIS compiler specific defines */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM1_H_GENERIC */
#ifndef __CMSIS_GENERIC
#ifndef __CORE_CM1_H_DEPENDANT
#define __CORE_CM1_H_DEPENDANT
#ifdef __cplusplus
extern "C" {
#endif
/* check device defines and use defaults */
#if defined __CHECK_DEVICE_DEFINES
#ifndef __CM1_REV
#define __CM1_REV 0x0100U
#warning "__CM1_REV not defined in device header file; using default!"
#endif
#ifndef __NVIC_PRIO_BITS
#define __NVIC_PRIO_BITS 2U
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
#endif
#ifndef __Vendor_SysTickConfig
#define __Vendor_SysTickConfig 0U
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
#endif
#endif
/* IO definitions (access restrictions to peripheral registers) */
/**
\defgroup CMSIS_glob_defs CMSIS Global Defines
<strong>IO Type Qualifiers</strong> are used
\li to specify the access to peripheral variables.
\li for automatic generation of peripheral register debug information.
*/
#ifdef __cplusplus
#define __I volatile /*!< Defines 'read only' permissions */
#else
#define __I volatile const /*!< Defines 'read only' permissions */
#endif
#define __O volatile /*!< Defines 'write only' permissions */
#define __IO volatile /*!< Defines 'read / write' permissions */
/* following defines should be used for structure members */
#define __IM volatile const /*! Defines 'read only' structure member permissions */
#define __OM volatile /*! Defines 'write only' structure member permissions */
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
/*@} end of group Cortex_M1 */
/*******************************************************************************
* Register Abstraction
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
******************************************************************************/
/**
\defgroup CMSIS_core_register Defines and Type Definitions
\brief Type definitions and defines for Cortex-M processor based devices.
*/
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CORE Status and Control Registers
\brief Core Register type definitions.
@{
*/
/**
\brief Union type to access the Application Program Status Register (APSR).
*/
typedef union
{
struct
{
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} APSR_Type;
/* APSR Register Definitions */
#define APSR_N_Pos 31U /*!< APSR: N Position */
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
#define APSR_C_Pos 29U /*!< APSR: C Position */
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
#define APSR_V_Pos 28U /*!< APSR: V Position */
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
/**
\brief Union type to access the Interrupt Program Status Register (IPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} IPSR_Type;
/* IPSR Register Definitions */
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
/**
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} xPSR_Type;
/* xPSR Register Definitions */
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
/**
\brief Union type to access the Control Registers (CONTROL).
*/
typedef union
{
struct
{
uint32_t _reserved0:1; /*!< bit: 0 Reserved */
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} CONTROL_Type;
/* CONTROL Register Definitions */
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
/*@} end of group CMSIS_CORE */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
\brief Type definitions for the NVIC Registers
@{
*/
/**
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
*/
typedef struct
{
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
uint32_t RESERVED0[31U];
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
uint32_t RSERVED1[31U];
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
uint32_t RESERVED2[31U];
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31U];
uint32_t RESERVED4[64U];
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SCB System Control Block (SCB)
\brief Type definitions for the System Control Block Registers
@{
*/
/**
\brief Structure type to access the System Control Block (SCB).
*/
typedef struct
{
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
uint32_t RESERVED0;
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
uint32_t RESERVED1;
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
/* SCB Interrupt Control State Register Definitions */
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
/* SCB Application Interrupt and Reset Control Register Definitions */
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
/* SCB System Control Register Definitions */
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
/* SCB Configuration Control Register Definitions */
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
/* SCB System Handler Control and State Register Definitions */
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
/*@} end of group CMSIS_SCB */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
\brief Type definitions for the System Control and ID Register not in the SCB
@{
*/
/**
\brief Structure type to access the System Control and ID Register not in the SCB.
*/
typedef struct
{
uint32_t RESERVED0[2U];
__IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
} SCnSCB_Type;
/* Auxiliary Control Register Definitions */
#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */
#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */
#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */
#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */
/*@} end of group CMSIS_SCnotSCB */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
\brief Type definitions for the System Timer Registers.
@{
*/
/**
\brief Structure type to access the System Timer (SysTick).
*/
typedef struct
{
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
} SysTick_Type;
/* SysTick Control / Status Register Definitions */
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
/* SysTick Reload Register Definitions */
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
/* SysTick Current Register Definitions */
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
/* SysTick Calibration Register Definitions */
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
/*@} end of group CMSIS_SysTick */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
\brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
Therefore they are not covered by the Cortex-M1 header file.
@{
*/
/*@} end of group CMSIS_CoreDebug */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_bitfield Core register bit field macros
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
@{
*/
/**
\brief Mask and shift a bit field value for use in a register bit range.
\param[in] field Name of the register bit field.
\param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type.
\return Masked and shifted value.
*/
#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
/**
\brief Mask and shift a register value to extract a bit filed value.
\param[in] field Name of the register bit field.
\param[in] value Value of register. This parameter is interpreted as an uint32_t type.
\return Masked and shifted bit field value.
*/
#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
/*@} end of group CMSIS_core_bitfield */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_base Core Definitions
\brief Definitions for base addresses, unions, and structures.
@{
*/
/* Memory mapping of Core Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
/*@} */
/*******************************************************************************
* Hardware Abstraction Layer
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
******************************************************************************/
/**
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
\brief Functions that manage interrupts and exceptions via the NVIC.
@{
*/
#ifdef CMSIS_NVIC_VIRTUAL
#ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
#define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
#endif
#include CMSIS_NVIC_VIRTUAL_HEADER_FILE
#else
#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping
#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping
#define NVIC_EnableIRQ __NVIC_EnableIRQ
#define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ
#define NVIC_DisableIRQ __NVIC_DisableIRQ
#define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ
#define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ
#define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ
/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */
#define NVIC_SetPriority __NVIC_SetPriority
#define NVIC_GetPriority __NVIC_GetPriority
#define NVIC_SystemReset __NVIC_SystemReset
#endif /* CMSIS_NVIC_VIRTUAL */
#ifdef CMSIS_VECTAB_VIRTUAL
#ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
#define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
#endif
#include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
#else
#define NVIC_SetVector __NVIC_SetVector
#define NVIC_GetVector __NVIC_GetVector
#endif /* (CMSIS_VECTAB_VIRTUAL) */
#define NVIC_USER_IRQ_OFFSET 16
/* The following EXC_RETURN values are saved the LR on exception entry */
#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */
#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */
#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */
/* Interrupt Priorities are WORD accessible only under Armv6-M */
/* The following MACROS handle generation of the register offset and byte masks */
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
#define __NVIC_SetPriorityGrouping(X) (void)(X)
#define __NVIC_GetPriorityGrouping() (0U)
/**
\brief Enable Interrupt
\details Enables a device specific interrupt in the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
__COMPILER_BARRIER();
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
__COMPILER_BARRIER();
}
}
/**
\brief Get Interrupt Enable status
\details Returns a device specific interrupt enable status from the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\return 0 Interrupt is not enabled.
\return 1 Interrupt is enabled.
\note IRQn must not be negative.
*/
__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
else
{
return(0U);
}
}
/**
\brief Disable Interrupt
\details Disables a device specific interrupt in the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
__DSB();
__ISB();
}
}
/**
\brief Get Pending Interrupt
\details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
\param [in] IRQn Device specific interrupt number.
\return 0 Interrupt status is not pending.
\return 1 Interrupt status is pending.
\note IRQn must not be negative.
*/
__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
else
{
return(0U);
}
}
/**
\brief Set Pending Interrupt
\details Sets the pending bit of a device specific interrupt in the NVIC pending register.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Clear Pending Interrupt
\details Clears the pending bit of a device specific interrupt in the NVIC pending register.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Set Interrupt Priority
\details Sets the priority of a device specific interrupt or a processor exception.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\param [in] priority Priority to set.
\note The priority cannot be set for every processor exception.
*/
__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
else
{
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
}
/**
\brief Get Interrupt Priority
\details Reads the priority of a device specific interrupt or a processor exception.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\return Interrupt Priority.
Value is aligned automatically to the implemented priority bits of the microcontroller.
*/
__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
else
{
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
}
/**
\brief Encode Priority
\details Encodes the priority for an interrupt with the given priority group,
preemptive priority value, and subpriority value.
In case of a conflict between priority grouping and available
priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
\param [in] PriorityGroup Used priority group.
\param [in] PreemptPriority Preemptive priority value (starting from 0).
\param [in] SubPriority Subpriority value (starting from 0).
\return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
*/
__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
return (
((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
);
}
/**
\brief Decode Priority
\details Decodes an interrupt priority value with a given priority group to
preemptive priority value and subpriority value.
In case of a conflict between priority grouping and available
priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
\param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
\param [in] PriorityGroup Used priority group.
\param [out] pPreemptPriority Preemptive priority value (starting from 0).
\param [out] pSubPriority Subpriority value (starting from 0).
*/
__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
*pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
*pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
}
/**
\brief Set Interrupt Vector
\details Sets an interrupt vector in SRAM based interrupt vector table.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
Address 0 must be mapped to SRAM.
\param [in] IRQn Interrupt number
\param [in] vector Address of interrupt handler function
*/
__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
{
uint32_t *vectors = (uint32_t *)0x0U;
vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
/* ARM Application Note 321 states that the M1 does not require the architectural barrier */
}
/**
\brief Get Interrupt Vector
\details Reads an interrupt vector from interrupt vector table.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\return Address of interrupt handler function
*/
__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
{
uint32_t *vectors = (uint32_t *)0x0U;
return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
}
/**
\brief System Reset
\details Initiates a system reset request to reset the MCU.
*/
__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
buffered write are completed before reset */
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
__DSB(); /* Ensure completion of memory access */
for(;;) /* wait until reset */
{
__NOP();
}
}
/*@} end of CMSIS_Core_NVICFunctions */
/* ########################## FPU functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_FpuFunctions FPU Functions
\brief Function that provides FPU type.
@{
*/
/**
\brief get FPU type
\details returns the FPU type
\returns
- \b 0: No FPU
- \b 1: Single precision FPU
- \b 2: Double + Single precision FPU
*/
__STATIC_INLINE uint32_t SCB_GetFPUType(void)
{
return 0U; /* No FPU */
}
/*@} end of CMSIS_Core_FpuFunctions */
/* ################################## SysTick function ############################################ */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
\brief Functions that configure the System.
@{
*/
#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
/**
\brief System Tick Configuration
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
Counter is in free running mode to generate periodic interrupts.
\param [in] ticks Number of ticks between two interrupts.
\return 0 Function succeeded.
\return 1 Function failed.
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
must contain a vendor-specific implementation of this function.
*/
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
{
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
{
return (1UL); /* Reload value impossible */
}
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0UL); /* Function successful */
}
#endif
/*@} end of CMSIS_Core_SysTickFunctions */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM1_H_DEPENDANT */
#endif /* __CMSIS_GENERIC */

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,272 @@
/******************************************************************************
* @file mpu_armv7.h
* @brief CMSIS MPU API for Armv7-M MPU
* @version V5.1.0
* @date 08. March 2019
******************************************************************************/
/*
* Copyright (c) 2017-2019 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef ARM_MPU_ARMV7_H
#define ARM_MPU_ARMV7_H
#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes
#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes
#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes
#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes
#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes
#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte
#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes
#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes
#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes
#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes
#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes
#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes
#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes
#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes
#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes
#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte
#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes
#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes
#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes
#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes
#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes
#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes
#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes
#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes
#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes
#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte
#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes
#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes
#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access
#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only
#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only
#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access
#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only
#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access
/** MPU Region Base Address Register Value
*
* \param Region The region to be configured, number 0 to 15.
* \param BaseAddress The base address for the region.
*/
#define ARM_MPU_RBAR(Region, BaseAddress) \
(((BaseAddress) & MPU_RBAR_ADDR_Msk) | \
((Region) & MPU_RBAR_REGION_Msk) | \
(MPU_RBAR_VALID_Msk))
/**
* MPU Memory Access Attributes
*
* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
* \param IsShareable Region is shareable between multiple bus masters.
* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache.
* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
*/
#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \
((((TypeExtField) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \
(((IsShareable) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \
(((IsCacheable) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \
(((IsBufferable) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk))
/**
* MPU Region Attribute and Size Register Value
*
* \param DisableExec Instruction access disable bit, 1= disable instruction fetches.
* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode.
* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_.
* \param SubRegionDisable Sub-region disable field.
* \param Size Region size of the region to be configured, for example 4K, 8K.
*/
#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \
((((DisableExec) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \
(((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \
(((AccessAttributes) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) | \
(((SubRegionDisable) << MPU_RASR_SRD_Pos) & MPU_RASR_SRD_Msk) | \
(((Size) << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk) | \
(((MPU_RASR_ENABLE_Msk))))
/**
* MPU Region Attribute and Size Register Value
*
* \param DisableExec Instruction access disable bit, 1= disable instruction fetches.
* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode.
* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
* \param IsShareable Region is shareable between multiple bus masters.
* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache.
* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
* \param SubRegionDisable Sub-region disable field.
* \param Size Region size of the region to be configured, for example 4K, 8K.
*/
#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \
ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size)
/**
* MPU Memory Access Attribute for strongly ordered memory.
* - TEX: 000b
* - Shareable
* - Non-cacheable
* - Non-bufferable
*/
#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U)
/**
* MPU Memory Access Attribute for device memory.
* - TEX: 000b (if shareable) or 010b (if non-shareable)
* - Shareable or non-shareable
* - Non-cacheable
* - Bufferable (if shareable) or non-bufferable (if non-shareable)
*
* \param IsShareable Configures the device memory as shareable or non-shareable.
*/
#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U))
/**
* MPU Memory Access Attribute for normal memory.
* - TEX: 1BBb (reflecting outer cacheability rules)
* - Shareable or non-shareable
* - Cacheable or non-cacheable (reflecting inner cacheability rules)
* - Bufferable or non-bufferable (reflecting inner cacheability rules)
*
* \param OuterCp Configures the outer cache policy.
* \param InnerCp Configures the inner cache policy.
* \param IsShareable Configures the memory as shareable or non-shareable.
*/
#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U))
/**
* MPU Memory Access Attribute non-cacheable policy.
*/
#define ARM_MPU_CACHEP_NOCACHE 0U
/**
* MPU Memory Access Attribute write-back, write and read allocate policy.
*/
#define ARM_MPU_CACHEP_WB_WRA 1U
/**
* MPU Memory Access Attribute write-through, no write allocate policy.
*/
#define ARM_MPU_CACHEP_WT_NWA 2U
/**
* MPU Memory Access Attribute write-back, no write allocate policy.
*/
#define ARM_MPU_CACHEP_WB_NWA 3U
/**
* Struct for a single MPU Region
*/
typedef struct {
uint32_t RBAR; //!< The region base address register value (RBAR)
uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR
} ARM_MPU_Region_t;
/** Enable the MPU.
* \param MPU_Control Default access permissions for unconfigured regions.
*/
__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
{
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
#endif
__DSB();
__ISB();
}
/** Disable the MPU.
*/
__STATIC_INLINE void ARM_MPU_Disable(void)
{
__DMB();
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
#endif
MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk;
}
/** Clear and disable the given MPU region.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
{
MPU->RNR = rnr;
MPU->RASR = 0U;
}
/** Configure an MPU region.
* \param rbar Value for RBAR register.
* \param rsar Value for RSAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr)
{
MPU->RBAR = rbar;
MPU->RASR = rasr;
}
/** Configure the given MPU region.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rsar Value for RSAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr)
{
MPU->RNR = rnr;
MPU->RBAR = rbar;
MPU->RASR = rasr;
}
/** Memcopy with strictly ordered memory access, e.g. for register targets.
* \param dst Destination data is copied to.
* \param src Source data is copied from.
* \param len Amount of data words to be copied.
*/
__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
{
uint32_t i;
for (i = 0U; i < len; ++i)
{
dst[i] = src[i];
}
}
/** Load the given number of MPU regions from a table.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt)
{
const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
while (cnt > MPU_TYPE_RALIASES) {
ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize);
table += MPU_TYPE_RALIASES;
cnt -= MPU_TYPE_RALIASES;
}
ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize);
}
#endif

View File

@ -0,0 +1,346 @@
/******************************************************************************
* @file mpu_armv8.h
* @brief CMSIS MPU API for Armv8-M and Armv8.1-M MPU
* @version V5.1.0
* @date 08. March 2019
******************************************************************************/
/*
* Copyright (c) 2017-2019 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef ARM_MPU_ARMV8_H
#define ARM_MPU_ARMV8_H
/** \brief Attribute for device memory (outer only) */
#define ARM_MPU_ATTR_DEVICE ( 0U )
/** \brief Attribute for non-cacheable, normal memory */
#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U )
/** \brief Attribute for normal memory (outer and inner)
* \param NT Non-Transient: Set to 1 for non-transient data.
* \param WB Write-Back: Set to 1 to use write-back update policy.
* \param RA Read Allocation: Set to 1 to use cache allocation on read miss.
* \param WA Write Allocation: Set to 1 to use cache allocation on write miss.
*/
#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \
(((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U))
/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U)
/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_nGnRE (1U)
/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_nGRE (2U)
/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_GRE (3U)
/** \brief Memory Attribute
* \param O Outer memory attributes
* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes
*/
#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U)))
/** \brief Normal memory non-shareable */
#define ARM_MPU_SH_NON (0U)
/** \brief Normal memory outer shareable */
#define ARM_MPU_SH_OUTER (2U)
/** \brief Normal memory inner shareable */
#define ARM_MPU_SH_INNER (3U)
/** \brief Memory access permissions
* \param RO Read-Only: Set to 1 for read-only memory.
* \param NP Non-Privileged: Set to 1 for non-privileged memory.
*/
#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U))
/** \brief Region Base Address Register value
* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned.
* \param SH Defines the Shareability domain for this memory region.
* \param RO Read-Only: Set to 1 for a read-only memory region.
* \param NP Non-Privileged: Set to 1 for a non-privileged memory region.
* \oaram XN eXecute Never: Set to 1 for a non-executable memory region.
*/
#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \
((BASE & MPU_RBAR_BASE_Msk) | \
((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \
((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \
((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk))
/** \brief Region Limit Address Register value
* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended.
* \param IDX The attribute index to be associated with this memory region.
*/
#define ARM_MPU_RLAR(LIMIT, IDX) \
((LIMIT & MPU_RLAR_LIMIT_Msk) | \
((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \
(MPU_RLAR_EN_Msk))
#if defined(MPU_RLAR_PXN_Pos)
/** \brief Region Limit Address Register with PXN value
* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended.
* \param PXN Privileged execute never. Defines whether code can be executed from this privileged region.
* \param IDX The attribute index to be associated with this memory region.
*/
#define ARM_MPU_RLAR_PXN(LIMIT, PXN, IDX) \
((LIMIT & MPU_RLAR_LIMIT_Msk) | \
((PXN << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \
((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \
(MPU_RLAR_EN_Msk))
#endif
/**
* Struct for a single MPU Region
*/
typedef struct {
uint32_t RBAR; /*!< Region Base Address Register value */
uint32_t RLAR; /*!< Region Limit Address Register value */
} ARM_MPU_Region_t;
/** Enable the MPU.
* \param MPU_Control Default access permissions for unconfigured regions.
*/
__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
{
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
#endif
__DSB();
__ISB();
}
/** Disable the MPU.
*/
__STATIC_INLINE void ARM_MPU_Disable(void)
{
__DMB();
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
#endif
MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk;
}
#ifdef MPU_NS
/** Enable the Non-secure MPU.
* \param MPU_Control Default access permissions for unconfigured regions.
*/
__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control)
{
MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
#endif
__DSB();
__ISB();
}
/** Disable the Non-secure MPU.
*/
__STATIC_INLINE void ARM_MPU_Disable_NS(void)
{
__DMB();
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
#endif
MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk;
}
#endif
/** Set the memory attribute encoding to the given MPU.
* \param mpu Pointer to the MPU to be configured.
* \param idx The attribute index to be set [0-7]
* \param attr The attribute value to be set.
*/
__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr)
{
const uint8_t reg = idx / 4U;
const uint32_t pos = ((idx % 4U) * 8U);
const uint32_t mask = 0xFFU << pos;
if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) {
return; // invalid index
}
mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask));
}
/** Set the memory attribute encoding.
* \param idx The attribute index to be set [0-7]
* \param attr The attribute value to be set.
*/
__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr)
{
ARM_MPU_SetMemAttrEx(MPU, idx, attr);
}
#ifdef MPU_NS
/** Set the memory attribute encoding to the Non-secure MPU.
* \param idx The attribute index to be set [0-7]
* \param attr The attribute value to be set.
*/
__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr)
{
ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr);
}
#endif
/** Clear and disable the given MPU region of the given MPU.
* \param mpu Pointer to MPU to be used.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr)
{
mpu->RNR = rnr;
mpu->RLAR = 0U;
}
/** Clear and disable the given MPU region.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
{
ARM_MPU_ClrRegionEx(MPU, rnr);
}
#ifdef MPU_NS
/** Clear and disable the given Non-secure MPU region.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr)
{
ARM_MPU_ClrRegionEx(MPU_NS, rnr);
}
#endif
/** Configure the given MPU region of the given MPU.
* \param mpu Pointer to MPU to be used.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rlar Value for RLAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar)
{
mpu->RNR = rnr;
mpu->RBAR = rbar;
mpu->RLAR = rlar;
}
/** Configure the given MPU region.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rlar Value for RLAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar)
{
ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar);
}
#ifdef MPU_NS
/** Configure the given Non-secure MPU region.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rlar Value for RLAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar)
{
ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar);
}
#endif
/** Memcopy with strictly ordered memory access, e.g. for register targets.
* \param dst Destination data is copied to.
* \param src Source data is copied from.
* \param len Amount of data words to be copied.
*/
__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
{
uint32_t i;
for (i = 0U; i < len; ++i)
{
dst[i] = src[i];
}
}
/** Load the given number of MPU regions from a table to the given MPU.
* \param mpu Pointer to the MPU registers to be used.
* \param rnr First region number to be configured.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt)
{
const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
if (cnt == 1U) {
mpu->RNR = rnr;
ARM_MPU_OrderedMemcpy(&(mpu->RBAR), &(table->RBAR), rowWordSize);
} else {
uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U);
uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES;
mpu->RNR = rnrBase;
while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) {
uint32_t c = MPU_TYPE_RALIASES - rnrOffset;
ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize);
table += c;
cnt -= c;
rnrOffset = 0U;
rnrBase += MPU_TYPE_RALIASES;
mpu->RNR = rnrBase;
}
ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize);
}
}
/** Load the given number of MPU regions from a table.
* \param rnr First region number to be configured.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt)
{
ARM_MPU_LoadEx(MPU, rnr, table, cnt);
}
#ifdef MPU_NS
/** Load the given number of MPU regions from a table to the Non-secure MPU.
* \param rnr First region number to be configured.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt)
{
ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt);
}
#endif
#endif

View File

@ -0,0 +1,70 @@
/******************************************************************************
* @file tz_context.h
* @brief Context Management for Armv8-M TrustZone
* @version V1.0.1
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2017-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef TZ_CONTEXT_H
#define TZ_CONTEXT_H
#include <stdint.h>
#ifndef TZ_MODULEID_T
#define TZ_MODULEID_T
/// \details Data type that identifies secure software modules called by a process.
typedef uint32_t TZ_ModuleId_t;
#endif
/// \details TZ Memory ID identifies an allocated memory slot.
typedef uint32_t TZ_MemoryId_t;
/// Initialize secure context memory system
/// \return execution status (1: success, 0: error)
uint32_t TZ_InitContextSystem_S (void);
/// Allocate context memory for calling secure software modules in TrustZone
/// \param[in] module identifies software modules called from non-secure mode
/// \return value != 0 id TrustZone memory slot identifier
/// \return value 0 no memory available or internal error
TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module);
/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id);
/// Load secure context (called on RTOS thread context switch)
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_LoadContext_S (TZ_MemoryId_t id);
/// Store secure context (called on RTOS thread context switch)
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_StoreContext_S (TZ_MemoryId_t id);
#endif // TZ_CONTEXT_H

View File

@ -0,0 +1,58 @@
/******************************************************************************
* @file main_s.c
* @brief Code template for secure main function
* @version V1.1.1
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/* Use CMSE intrinsics */
#include <arm_cmse.h>
#include "RTE_Components.h"
#include CMSIS_device_header
/* TZ_START_NS: Start address of non-secure application */
#ifndef TZ_START_NS
#define TZ_START_NS (0x200000U)
#endif
/* typedef for non-secure callback functions */
typedef void (*funcptr_void) (void) __attribute__((cmse_nonsecure_call));
/* Secure main() */
int main(void) {
funcptr_void NonSecure_ResetHandler;
/* Add user setup code for secure part here*/
/* Set non-secure main stack (MSP_NS) */
__TZ_set_MSP_NS(*((uint32_t *)(TZ_START_NS)));
/* Get non-secure reset handler */
NonSecure_ResetHandler = (funcptr_void)(*((uint32_t *)((TZ_START_NS) + 4U)));
/* Start non-secure state software application */
NonSecure_ResetHandler();
/* Non-secure software does not return, this code is not executed */
while (1) {
__NOP();
}
}

View File

@ -0,0 +1,200 @@
/******************************************************************************
* @file tz_context.c
* @brief Context Management for Armv8-M TrustZone - Sample implementation
* @version V1.1.1
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2016-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "RTE_Components.h"
#include CMSIS_device_header
#include "tz_context.h"
/// Number of process slots (threads may call secure library code)
#ifndef TZ_PROCESS_STACK_SLOTS
#define TZ_PROCESS_STACK_SLOTS 8U
#endif
/// Stack size of the secure library code
#ifndef TZ_PROCESS_STACK_SIZE
#define TZ_PROCESS_STACK_SIZE 256U
#endif
typedef struct {
uint32_t sp_top; // stack space top
uint32_t sp_limit; // stack space limit
uint32_t sp; // current stack pointer
} stack_info_t;
static stack_info_t ProcessStackInfo [TZ_PROCESS_STACK_SLOTS];
static uint64_t ProcessStackMemory[TZ_PROCESS_STACK_SLOTS][TZ_PROCESS_STACK_SIZE/8U];
static uint32_t ProcessStackFreeSlot = 0xFFFFFFFFU;
/// Initialize secure context memory system
/// \return execution status (1: success, 0: error)
__attribute__((cmse_nonsecure_entry))
uint32_t TZ_InitContextSystem_S (void) {
uint32_t n;
if (__get_IPSR() == 0U) {
return 0U; // Thread Mode
}
for (n = 0U; n < TZ_PROCESS_STACK_SLOTS; n++) {
ProcessStackInfo[n].sp = 0U;
ProcessStackInfo[n].sp_limit = (uint32_t)&ProcessStackMemory[n];
ProcessStackInfo[n].sp_top = (uint32_t)&ProcessStackMemory[n] + TZ_PROCESS_STACK_SIZE;
*((uint32_t *)ProcessStackMemory[n]) = n + 1U;
}
*((uint32_t *)ProcessStackMemory[--n]) = 0xFFFFFFFFU;
ProcessStackFreeSlot = 0U;
// Default process stack pointer and stack limit
__set_PSPLIM((uint32_t)ProcessStackMemory);
__set_PSP ((uint32_t)ProcessStackMemory);
// Privileged Thread Mode using PSP
__set_CONTROL(0x02U);
return 1U; // Success
}
/// Allocate context memory for calling secure software modules in TrustZone
/// \param[in] module identifies software modules called from non-secure mode
/// \return value != 0 id TrustZone memory slot identifier
/// \return value 0 no memory available or internal error
__attribute__((cmse_nonsecure_entry))
TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module) {
uint32_t slot;
(void)module; // Ignore (fixed Stack size)
if (__get_IPSR() == 0U) {
return 0U; // Thread Mode
}
if (ProcessStackFreeSlot == 0xFFFFFFFFU) {
return 0U; // No slot available
}
slot = ProcessStackFreeSlot;
ProcessStackFreeSlot = *((uint32_t *)ProcessStackMemory[slot]);
ProcessStackInfo[slot].sp = ProcessStackInfo[slot].sp_top;
return (slot + 1U);
}
/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
__attribute__((cmse_nonsecure_entry))
uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id) {
uint32_t slot;
if (__get_IPSR() == 0U) {
return 0U; // Thread Mode
}
if ((id == 0U) || (id > TZ_PROCESS_STACK_SLOTS)) {
return 0U; // Invalid ID
}
slot = id - 1U;
if (ProcessStackInfo[slot].sp == 0U) {
return 0U; // Inactive slot
}
ProcessStackInfo[slot].sp = 0U;
*((uint32_t *)ProcessStackMemory[slot]) = ProcessStackFreeSlot;
ProcessStackFreeSlot = slot;
return 1U; // Success
}
/// Load secure context (called on RTOS thread context switch)
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
__attribute__((cmse_nonsecure_entry))
uint32_t TZ_LoadContext_S (TZ_MemoryId_t id) {
uint32_t slot;
if ((__get_IPSR() == 0U) || ((__get_CONTROL() & 2U) == 0U)) {
return 0U; // Thread Mode or using Main Stack for threads
}
if ((id == 0U) || (id > TZ_PROCESS_STACK_SLOTS)) {
return 0U; // Invalid ID
}
slot = id - 1U;
if (ProcessStackInfo[slot].sp == 0U) {
return 0U; // Inactive slot
}
// Setup process stack pointer and stack limit
__set_PSPLIM(ProcessStackInfo[slot].sp_limit);
__set_PSP (ProcessStackInfo[slot].sp);
return 1U; // Success
}
/// Store secure context (called on RTOS thread context switch)
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
__attribute__((cmse_nonsecure_entry))
uint32_t TZ_StoreContext_S (TZ_MemoryId_t id) {
uint32_t slot;
uint32_t sp;
if ((__get_IPSR() == 0U) || ((__get_CONTROL() & 2U) == 0U)) {
return 0U; // Thread Mode or using Main Stack for threads
}
if ((id == 0U) || (id > TZ_PROCESS_STACK_SLOTS)) {
return 0U; // Invalid ID
}
slot = id - 1U;
if (ProcessStackInfo[slot].sp == 0U) {
return 0U; // Inactive slot
}
sp = __get_PSP();
if ((sp < ProcessStackInfo[slot].sp_limit) ||
(sp > ProcessStackInfo[slot].sp_top)) {
return 0U; // SP out of range
}
ProcessStackInfo[slot].sp = sp;
// Default process stack pointer and stack limit
__set_PSPLIM((uint32_t)ProcessStackMemory);
__set_PSP ((uint32_t)ProcessStackMemory);
return 1U; // Success
}

View File

@ -0,0 +1,136 @@
cmake_minimum_required (VERSION 3.6)
cmake_policy(SET CMP0077 NEW)
# The tests are assuming that MATRIX_CHECK is enabled when building
# CMSIS-DSP.
set(MATRIXCHECK ON)
set(FASTMATHCOMPUTATIONS OFF)
option(DUMPPATTERN "Dump test patterns when test is failing" ON)
option(CUSTOMIZE_TESTS "Enable customizations of tests" ON)
option(BASICMATH_TESTS "Enable Basic Math testing" ON)
option(COMPLEXMATH_TESTS "Enable Complex Math testing" ON)
option(CONTROLLER_TESTS "Enable Controller testing" ON)
option(FASTMATH_TESTS "Enable Fast Math testing" ON)
option(INTRINSICS_TESTS "Enable Intrinsics testing" ON)
option(FILTERING_TESTS "Enable Filtering testing" ON)
option(MATRIX_TESTS "Enable Matrix testing" ON)
option(STATISTICS_TESTS "Enable Statistics testing" ON)
option(SUPPORT_TESTS "Enable Support testing" ON)
option(TRANSFORM_TESTS "Enable Transform testing" ON)
project(DSP_Lib_TestSuite)
# Needed to find the config modules
list(APPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/..)
set(ROOT ${CMAKE_CURRENT_SOURCE_DIR}/../../..)
file(GLOB MAIN "Common/src/*.c")
file(GLOB BASICMATH_TESTS_SRC "Common/src/basic_math_tests/*.c")
file(GLOB COMPLEXMATH_TESTS_SRC "Common/src/complex_math_tests/*.c")
file(GLOB CONTROLLER_TESTS_SRC "Common/src/controller_tests/*.c")
file(GLOB FASTMATH_TESTS_SRC "Common/src/fast_math_tests/*.c")
file(GLOB FILTERING_TESTS_SRC "Common/src/filtering_tests/*.c")
file(GLOB INTRINSINCS_TESTS_SRC "Common/src/intrinsics_tests/*.c")
file(GLOB MATRIX_TESTS_SRC "Common/src/matrix_tests/*.c")
file(GLOB STATISTICS_TESTS_SRC "Common/src/statistics_tests/*.c")
file(GLOB SUPPORT_TESTS_SRC "Common/src/support_tests/*.c")
file(GLOB TRANSFORM_TESTS_SRC "Common/src/transform_tests/*.c")
file(GLOB JTEST_MAIN "Common/JTest/src/*.c")
set(TESTSRC ${MAIN}
${BASICMATH_TESTS_SRC}
${COMPLEXMATH_TESTS_SRC}
${CONTROLLER_TESTS_SRC}
${FASTMATH_TESTS_SRC}
${FILTERING_TESTS_SRC}
${INTRINSINCS_TESTS_SRC}
${MATRIX_TESTS_SRC}
${STATISTICS_TESTS_SRC}
${SUPPORT_TESTS_SRC}
${TRANSFORM_TESTS_SRC}
${JTEST_MAIN}
)
set(JINCS
Common/JTest/inc
Common/JTest/inc/arr_desc
Common/inc/basic_math_tests
Common/inc/complex_math_tests
Common/inc/controller_tests
Common/inc/fast_math_tests
Common/inc/filtering_tests
Common/inc/intrinsics_tests
Common/inc/matrix_tests
Common/inc/statistics_tests
Common/inc/support_tests
Common/inc/transform_tests
)
add_subdirectory(../Source bin_dsp)
add_subdirectory(RefLibs bin_ref)
add_executable(DSP_Lib_TestSuite)
if (CUSTOMIZE_TESTS)
target_compile_definitions(DSP_Lib_TestSuite PRIVATE CUSTOMIZE_TESTS)
endif()
if (BASICMATH_TESTS)
target_compile_definitions(DSP_Lib_TestSuite PRIVATE ENABLE_BASICMATH_TESTS)
endif()
if (COMPLEXMATH_TESTS)
target_compile_definitions(DSP_Lib_TestSuite PRIVATE ENABLE_COMPLEXMATH_TESTS)
endif()
if (CONTROLLER_TESTS)
target_compile_definitions(DSP_Lib_TestSuite PRIVATE ENABLE_CONTROLLER_TESTS)
endif()
if (FASTMATH_TESTS)
target_compile_definitions(DSP_Lib_TestSuite PRIVATE ENABLE_FASTMATH_TESTS)
endif()
if (FILTERING_TESTS)
target_compile_definitions(DSP_Lib_TestSuite PRIVATE ENABLE_FILTERING_TESTS)
endif()
if (INTRINSICS_TESTS)
target_compile_definitions(DSP_Lib_TestSuite PRIVATE ENABLE_INTRINSICS_TESTS)
endif()
if (MATRIX_TESTS)
target_compile_definitions(DSP_Lib_TestSuite PRIVATE ENABLE_MATRIX_TESTS)
endif()
if (STATISTICS_TESTS)
target_compile_definitions(DSP_Lib_TestSuite PRIVATE ENABLE_STATISTICS_TESTS)
endif()
if (SUPPORT_TESTS)
target_compile_definitions(DSP_Lib_TestSuite PRIVATE ENABLE_SUPPORT_TESTS)
endif()
if (TRANSFORM_TESTS)
target_compile_definitions(DSP_Lib_TestSuite PRIVATE ENABLE_TRANSFORM_TESTS)
endif()
if (DUMPPATTERN)
target_compile_definitions(DSP_Lib_TestSuite PRIVATE DUMPPATTERN)
endif()
# Change behavior of configBoot for scatter file
set(TESTFRAMEWORK ON)
include(configBoot)
file(COPY ${ROOT}/CMSIS/DSP/Examples/ARM/boot/RTE_Components.h DESTINATION tempLink)
target_link_libraries(DSP_Lib_TestSuite PRIVATE CMSISDSP)
target_link_libraries(DSP_Lib_TestSuite PRIVATE DspRefLibs)
target_sources(DSP_Lib_TestSuite PRIVATE ${TESTSRC})
### Includes
target_include_directories(DSP_Lib_TestSuite PRIVATE "Common/inc")
target_include_directories(DSP_Lib_TestSuite PRIVATE "Common/inc/templates")
target_include_directories(DSP_Lib_TestSuite PRIVATE ${JINCS})

View File

@ -0,0 +1,220 @@
#ifndef _ARR_DESC_H_
#define _ARR_DESC_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include <stdint.h>
#include <string.h> /* memset() */
#include "../util/util.h" /* CONCAT() */
/*--------------------------------------------------------------------------------*/
/* Type Definitions */
/*--------------------------------------------------------------------------------*/
/**
* Array-descriptor struct.
*/
typedef struct ARR_DESC_struct
{
void * data_ptr; /* Pointer to the array contents. */
int32_t element_count; /* Number of current elements. */
int32_t element_size; /* Size of current elements in bytes. */
int32_t underlying_size; /* Size of underlying array in bytes. */
} ARR_DESC_t;
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/**
* Prefix of the array variable's name when creating an array and an array
* descriptor at the same time.
*/
#define ARR_DESC_ARR_PREFIX ARR_DESC_ARR_
/**
* Evaluate to the array variable's name when creating an array and an array
* descriptor at the same time.
*/
#define ARR_DESC_ARR_NAME(name) \
CONCAT(ARR_DESC_ARR_PREFIX, name)
/**
* Define an #ARR_DESC_t by itself.
*
* @note The user must supply an array to store the data used by the
* #ARR_DESC_t.
*/
#define ARR_DESC_INTERNAL_DEFINE(name, data_ptr, \
element_count, element_size) \
ARR_DESC_t name = { \
data_ptr, \
element_count, \
element_size, \
element_count * element_size \
} \
/**
* Define both an array and an #ARR_DESC_t that describes it.
*
* @note Use the #CURLY() macro for the content field; it provides the curly
* braces necessary for an array initialization.
*/
#define ARR_DESC_DEFINE(type, name, element_count, content) \
type ARR_DESC_ARR_NAME(name)[element_count] = content; \
ARR_DESC_INTERNAL_DEFINE(name, \
&ARR_DESC_ARR_NAME(name), \
element_count, \
sizeof(type)) /* Note the lacking semicolon */
/**
* Create a #ARR_DESC_t which refers to a subset of the data in another.
*
* The new #ARR_DESC_t shares the same underlying array as the aliased
* #ARR_DESC_t, but only describes a subset of the originals values.
*/
#define ARR_DESC_DEFINE_SUBSET(name, original, element_cnt) \
ARR_DESC_INTERNAL_DEFINE(name, \
&ARR_DESC_ARR_NAME(original), \
element_cnt, \
sizeof(ARR_DESC_ARR_NAME(original)[0]) \
) /* Note the lacking semicolon */
/**
* Creat an #ARR_DESC_t which points to the data in an existing array.
*
* @param start_idx Offset in array_ptr of first element.
* @param element_cnt Number of elements to include in the #ARR_DESC_t.
*
* @example
*
* float my_floats[4] = {0.0f, 1.0f, 2.0f, 3.0f};
*
* ARR_DESC_DEFINE_USING_ARR(my_arr_desc, my_floats, 1, 3);
*
* printf("Element 0: %f\n", ARR_DESC_ELT(float, 0, &my_arr_desc));
* printf("Element 1: %f\n", ARR_DESC_ELT(float, 1, &my_arr_desc));
*
* Outputs:
*
* Element 0: 1.000000
* Element 1: 2.000000
*
* @warning There are no checks in place to catch invalid start indices; This
* is left to the user.
*/
#define ARR_DESC_DEFINE_USING_ARR(type, name, array_ptr, start_idx, element_cnt) \
ARR_DESC_INTERNAL_DEFINE( \
name, \
(type *) (array_ptr + start_idx), \
element_cnt, \
sizeof(type) \
) /* Note the lacking semicolon*/
/**
* Declare an #ARR_DESC_t object.
*/
#define ARR_DESC_DECLARE(name) \
extern ARR_DESC_t name /* Note the lacking semicolon */
/**
* Evaluate to the number of bytes stored in the #ARR_DESC_t.
*/
#define ARR_DESC_BYTES(arr_desc_ptr) \
((arr_desc_ptr)->element_count * (arr_desc_ptr)->element_size)
/**
* Set the contents of #ARR_DESC_t to value.
*/
#define ARR_DESC_MEMSET(arr_desc_ptr, value, bytes) \
do \
{ \
memset((arr_desc_ptr)->data_ptr, \
value, \
BOUND(0, \
(arr_desc_ptr)->underlying_size, \
bytes) \
); \
} while (0)
/**
* Perform a memcpy of 'bytes' bytes from the source #ARR_DESC_t to the
* destination #ARR_DESC_t.
*/
#define ARR_DESC_MEMCPY(arr_desc_dest_ptr, arr_desc_src_ptr, bytes) \
do \
{ \
memcpy((arr_desc_dest_ptr)->data_ptr, \
(arr_desc_src_ptr)->data_ptr, \
BOUND(0, \
(arr_desc_dest_ptr)->underlying_size, \
bytes)); \
} while (0)
/**
* Evaluate to true if the source #ARR_DESC_t contents will fit into the
* destination #ARR_DESC_t and false otherwise.
*/
#define ARR_DESC_COPYABLE(arr_desc_dest_ptr, arr_desc_src_ptr) \
(ARR_DESC_BYTES(arr_desc_src_ptr) <= \
(arr_desc_dest_ptr)->underlying_size)
/**
* Copy all the data from the source #ARR_DESC_t to the destination
* #ARR_DESC_t.
*
* @note If the destination #ARR_DESC_t is too small to fit the source data the
* copy is aborted and nothing happens.
*/
#define ARR_DESC_COPY(arr_desc_dest_ptr, arr_desc_src_ptr) \
do \
{ \
if (ARR_DESC_COPYABLE(arr_desc_dest_ptr, \
arr_desc_src_ptr)) \
{ \
ARR_DESC_MEMCPY(arr_desc_dest_ptr, \
arr_desc_src_ptr, \
ARR_DESC_BYTES(arr_desc_src_ptr)); \
/* Update the properties*/ \
(arr_desc_dest_ptr)->element_count = \
(arr_desc_src_ptr)->element_count; \
(arr_desc_dest_ptr)->element_size = \
(arr_desc_src_ptr)->element_size; \
} \
} while (0)
/**
* Compare the data in two #ARR_DESC_t structs for the specified number of
* bytes.
*/
#define ARR_DESC_MEMCMP(arr_desc_ptr_a, arr_desc_ptr_b, bytes) \
memcmp((arr_desc_ptr_a)->data_ptr, \
(arr_desc_ptr_b)->data_ptr, \
bytes) /* Note the lacking semicolon */ \
/**
* Zero out the contents of the #ARR_DESC_t.
*/
#define ARR_DESC_ZERO(arr_desc_ptr) \
ARR_DESC_MEMSET(arr_desc_ptr, \
0, \
(arr_desc_ptr)->underlying_size)
/**
* Evaluate to the data address in #ARR_DESC_t at offset.
*/
#define ARR_DESC_DATA_ADDR(type, arr_desc_ptr, offset) \
((void*)(((type *) \
((arr_desc_ptr)->data_ptr)) \
+ offset))
/**
* Evaluate to the element in #ARR_DESC_t with type at idx.
*/
#define ARR_DESC_ELT(type, idx, arr_desc_ptr) \
(*((type *) ARR_DESC_DATA_ADDR(type, \
arr_desc_ptr, \
idx)))
#endif /* _ARR_DESC_H_ */

View File

@ -0,0 +1,17 @@
#ifndef _JTEST_H_
#define _JTEST_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include "jtest_fw.h"
#include "jtest_test.h"
#include "jtest_test_define.h"
#include "jtest_test_call.h"
#include "jtest_group.h"
#include "jtest_group_define.h"
#include "jtest_group_call.h"
#include "jtest_cycle.h"
#endif /* _JTEST_H_ */

View File

@ -0,0 +1,79 @@
#ifndef _JTEST_CYCLE_H_
#define _JTEST_CYCLE_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include "jtest_fw.h" /* JTEST_DUMP_STRF() */
#include "jtest_systick.h"
#include "jtest_util.h" /* STR() */
/*--------------------------------------------------------------------------------*/
/* Declare Module Variables */
/*--------------------------------------------------------------------------------*/
extern const char * JTEST_CYCLE_STRF;
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/**
* Wrap the function call, fn_call, to count execution cycles and display the
* results.
*/
/* skipp function name + param
#define JTEST_COUNT_CYCLES(fn_call) \
do \
{ \
uint32_t __jtest_cycle_end_count; \
\
JTEST_SYSTICK_RESET(SysTick); \
JTEST_SYSTICK_START(SysTick); \
\
fn_call; \
\
__jtest_cycle_end_count = \
JTEST_SYSTICK_VALUE(SysTick); \
\
JTEST_SYSTICK_RESET(SysTick); \
JTEST_DUMP_STRF(JTEST_CYCLE_STRF, \
STR(fn_call), \
(JTEST_SYSTICK_INITIAL_VALUE - \
__jtest_cycle_end_count)); \
} while (0)
*/
#ifndef ARMv7A
#define JTEST_COUNT_CYCLES(fn_call) \
do \
{ \
uint32_t __jtest_cycle_end_count; \
\
JTEST_SYSTICK_RESET(SysTick); \
JTEST_SYSTICK_START(SysTick); \
\
fn_call; \
\
__jtest_cycle_end_count = \
JTEST_SYSTICK_VALUE(SysTick); \
\
JTEST_SYSTICK_RESET(SysTick); \
JTEST_DUMP_STRF(JTEST_CYCLE_STRF, \
(JTEST_SYSTICK_INITIAL_VALUE - \
__jtest_cycle_end_count)); \
} while (0)
#else
/* TODO */
#define JTEST_COUNT_CYCLES(fn_call) \
do \
{ \
fn_call; \
} while (0)
#endif
#endif /* _JTEST_CYCLE_H_ */

View File

@ -0,0 +1,37 @@
#ifndef _JTEST_DEFINE_H_
#define _JTEST_DEFINE_H_
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/**
* Makes a symbol for use as a struct name. Names made this way have two parts;
* the first parts is a prefix common to all structs of that class. The second
* is a specifier which differs for each instance of that struct type.
*/
#define JTEST_STRUCT_NAME(prefix, specifier) \
CONCAT(prefix, specifier)
/**
* Define a struct with type with a name generated by #JTEST_STRUCT_NAME().
*/
#define JTEST_DEFINE_STRUCT(type, struct_name) \
type struct_name
/**
* Declare a struct with type with a name generated by #JTEST_STRUCT_NAME().
*/
#define JTEST_DECLARE_STRUCT(struct_definition) \
extern struct_definition
/**
* Define and initialize a struct (created with JTEST_DEFINE_STRUCT()) and
* initialize it with init_values.
*/
#define JTEST_INIT_STRUCT(struct_definition, init_values) \
struct_definition = { \
init_values \
}
#endif /* _JTEST_DEFINE_H_ */

View File

@ -0,0 +1,282 @@
#ifndef _JTEST_FW_H_
#define _JTEST_FW_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include <stdint.h> /* int32_t */
#include <string.h> /* strcpy() */
#include <stdio.h> /* sprintf() */
#include "jtest_pf.h" /* Extend JTEST_FW_t with Pass/Fail data */
#include "jtest_group.h"
/*--------------------------------------------------------------------------------*/
/* Type Definitions */
/*--------------------------------------------------------------------------------*/
/**
* A struct used to interface with the Keil Debugger.
*/
typedef struct JTEST_FW_struct
{
/* Action Triggers: The Keil debugger monitors these values for changes. In
* response to a change, the debugger executes code on the host. */
volatile int32_t test_start;
volatile int32_t test_end;
volatile int32_t group_start;
volatile int32_t group_end;
volatile int32_t dump_str;
volatile int32_t dump_data;
volatile int32_t exit_fw;
JTEST_GROUP_t * current_group_ptr;
/* Buffers: The C-code cannot send strings and data directly to the
* debugging framework. Instead, the debugger can be told to read 128 byte
* (by default) chunks of memory. Data received in this manner requires
* post-processing to be legible.*/
char * str_buffer;
char * data_buffer;
/* Pass/Fail Data */
JTEST_PF_MEMBERS;
} JTEST_FW_t;
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/**
* Default name for the JTEST_FW struct.
*
* Define your own if you want the variable containing the #JTEST_FW_t to have
* a different name.
*/
#ifndef JTEST_FW
#define JTEST_FW JTEST_FW
#endif
/**
* Default name for the JTEST_FW_STR_BUFFER.
*
* Define your own if you want the variable containing the char buffer to have
* a different name.
*/
#ifndef JTEST_FW_STR_BUFFER
#define JTEST_FW_STR_BUFFER JTEST_FW_STR_BUFFER
#endif
/**
* Size of the #JTEST_FW_t, output string-buffer.
*
* If you change this value, make sure the "dump_str_fn" and "dump_data_fn"
* functions in jtest_fns.ini uses the same size. If you aren't sure, read the
* documentation Keil Debugger Command 'DISPLAY'.
*/
#define JTEST_BUF_SIZE 256
/**
* The maximum number of bytes output at once using #JTEST_DUMP_STRF().
*/
#define JTEST_STR_MAX_OUTPUT_SIZE 128
/**
* The maximum number of block transimissions needed to send a string from a
* buffer with JTEST_BUF_SIZE.
*/
#define JTEST_STR_MAX_OUTPUT_SEGMENTS \
(JTEST_BUF_SIZE / JTEST_STR_MAX_OUTPUT_SIZE)
/**
* Initialize the JTEST framework.
*/
#define JTEST_INIT() \
do \
{ \
JTEST_FW.str_buffer = JTEST_FW_STR_BUFFER; \
} while (0)
/* Debugger Action-triggering Macros */
/*--------------------------------------------------------------------------------*/
/**
* Dispatch macro to trigger various actions in the Keil Debugger.
*/
#define JTEST_TRIGGER_ACTION(action_name) \
do \
{ \
action_name(); \
} while (0)
/**
* Trigger the "Test Start" action in the Keil Debugger.
*/
#define JTEST_ACT_TEST_START() \
JTEST_TRIGGER_ACTION(test_start)
/**
* Trigger the "Test End" action in the Keil Debugger.
*/
#define JTEST_ACT_TEST_END() \
JTEST_TRIGGER_ACTION(test_end)
/**
* Trigger the "Group Start" action in the Keil Debugger.
*/
#define JTEST_ACT_GROUP_START() \
JTEST_TRIGGER_ACTION(group_start)
/**
* Trigger the "Group End" action in the Keil Debugger.
*/
#define JTEST_ACT_GROUP_END() \
JTEST_TRIGGER_ACTION(group_end)
/**
* Fill the buffer named buf_name with value and dump it to the Keil debugger
* using action.
*/
#if defined(ARMv7A) || defined(FILEIO)
#define JTEST_ACT_DUMP(action, buf_name, value) \
do \
{ \
JTEST_CLEAR_BUFFER(buf_name); \
printf("%s",value); \
strcpy(JTEST_FW.buf_name, (value)); \
JTEST_TRIGGER_ACTION(action); \
} while (0)
#else
#define JTEST_ACT_DUMP(action, buf_name, value) \
do \
{ \
JTEST_CLEAR_BUFFER(buf_name); \
strcpy(JTEST_FW.buf_name, (value)); \
JTEST_TRIGGER_ACTION(action); \
} while (0)
#endif
/**
* Trigger the "Exit Framework" action in the Keil Debugger.
*/
#define JTEST_ACT_EXIT_FW() \
do \
{ \
JTEST_TRIGGER_ACTION(exit_fw); \
} while (0)
/* Buffer Manipulation Macros */
/*--------------------------------------------------------------------------------*/
/**
* Clear the JTEST_FW buffer with name buf_name.
*/
#define JTEST_CLEAR_BUFFER(buf_name) \
do \
{ \
memset(JTEST_FW.buf_name, 0, JTEST_BUF_SIZE); \
} while (0)
/**
* Clear the memory needed for the JTEST_FW's string buffer.
*/
#define JTEST_CLEAR_STR_BUFFER() \
JTEST_CLEAR_BUFFER(str_buffer)
/**
* Clear the memory needed for the JTEST_FW's data buffer.
*/
#define JTEST_CLEAR_DATA_BUFFER() \
JTEST_CLEAR_BUFFER(data_buffer)
/**
* Dump the given string to the Keil Debugger.
*/
#define JTEST_DUMP_STR(string) \
JTEST_ACT_DUMP(dump_str, str_buffer, string)
/**
* Dump a formatted string to the Keil Debugger.
*/
#if defined(ARMv7A) || defined(FILEIO)
#define JTEST_DUMP_STRF(format_str, ... ) \
do \
{ \
JTEST_CLEAR_STR_BUFFER(); \
sprintf(JTEST_FW.str_buffer,format_str, __VA_ARGS__); \
printf("%s",JTEST_FW.str_buffer); \
jtest_dump_str_segments(); \
} while (0)
#else
#define JTEST_DUMP_STRF(format_str, ... ) \
do \
{ \
JTEST_CLEAR_STR_BUFFER(); \
sprintf(JTEST_FW.str_buffer,format_str, __VA_ARGS__); \
jtest_dump_str_segments(); \
} while (0)
#endif
/* Pass/Fail Macros */
/*--------------------------------------------------------------------------------*/
/**
* Increment the number of passed tests in #JTEST_FW.
*/
#define JTEST_FW_INC_PASSED(amount) \
JTEST_PF_INC_PASSED(&JTEST_FW, amount)
/**
* Increment the number of passed tests in #JTEST_FW.
*/
#define JTEST_FW_INC_FAILED(amount) \
JTEST_PF_INC_FAILED(&JTEST_FW, amount)
/* Manipulating the Current Group */
/*--------------------------------------------------------------------------------*/
/**
* Evaluate to the current_group_ptr in #JTEST_FW.
*/
#define JTEST_CURRENT_GROUP_PTR() \
(JTEST_FW.current_group_ptr)
#define JTEST_SET_CURRENT_GROUP(group_ptr) \
do \
{ \
JTEST_CURRENT_GROUP_PTR() = group_ptr; \
} while (0)
/*--------------------------------------------------------------------------------*/
/* Declare Global Variables */
/*--------------------------------------------------------------------------------*/
extern char JTEST_FW_STR_BUFFER[JTEST_BUF_SIZE];
extern volatile JTEST_FW_t JTEST_FW;
/*--------------------------------------------------------------------------------*/
/* Function Prototypes */
/*--------------------------------------------------------------------------------*/
void jtest_dump_str_segments(void);
void test_start (void);
void test_end (void);
void group_start (void);
void group_end (void);
void dump_str (void);
void dump_data (void);
void exit_fw (void);
#endif /* _JTEST_FW_H_ */

View File

@ -0,0 +1,66 @@
#ifndef _JTEST_GROUP_H_
#define _JTEST_GROUP_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include "jtest_pf.h"
#include "jtest_util.h"
/*--------------------------------------------------------------------------------*/
/* Type Definitions */
/*--------------------------------------------------------------------------------*/
/**
* A struct which represents a group of #JTEST_TEST_t structs. This struct is
* used to run the group of tests, and report on their outcomes.
*/
typedef struct JTEST_GROUP_struct
{
void (* group_fn_ptr) (void); /**< Pointer to the test group */
char * name_str; /**< Name of the group */
/* Extend the #JTEST_GROUP_t with Pass/Fail information.*/
JTEST_PF_MEMBERS;
} JTEST_GROUP_t;
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/**
* Set the name of JTEST_GROUP_t.
*/
#define JTEST_GROUP_SET_NAME(group_ptr, name) \
JTEST_SET_STRUCT_ATTRIBUTE(group_ptr, name_str, name)
#define JTEST_GROUP_SET_FN(group_ptr, fn_ptr) \
JTEST_SET_STRUCT_ATTRIBUTE(group_ptr, group_fn_ptr, fn_ptr)
/**
* Increment the number of tests passed in the JTEST_GROUP_t pointed to by
* group_ptr.
*/
#define JTEST_GROUP_INC_PASSED(group_ptr, amount) \
JTEST_PF_INC_PASSED(group_ptr, amount)
/**
* Increment the number of tests failed in the JTEST_GROUP_t pointed to by
* group_ptr.
*/
#define JTEST_GROUP_INC_FAILED(group_ptr, amount) \
JTEST_PF_INC_FAILED(group_ptr, amount)
/**
* Reset the pass/fail information of the #JTEST_GROUP_t pointed to by
* group_ptr.
*/
#define JTEST_GROUP_RESET_PF(group_ptr) \
do \
{ \
JTEST_PF_RESET_PASSED(group_ptr); \
JTEST_PF_RESET_FAILED(group_ptr); \
} while (0)
#endif /* _JTEST_GROUP_H_ */

View File

@ -0,0 +1,126 @@
#ifndef _JTEST_GROUP_CALL_H_
#define _JTEST_GROUP_CALL_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include "jtest_fw.h"
#include <inttypes.h>
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/**
* Execute the test in the #JTEST_GROUP_t struct associated witht he identifier
* group_fn.
*/
#define JTEST_GROUP_RUN(group_fn) \
do \
{ \
JTEST_DUMP_STR("Group Name:\n"); \
JTEST_DUMP_STR(JTEST_GROUP_STRUCT_NAME(group_fn).name_str); \
JTEST_GROUP_STRUCT_NAME(group_fn).group_fn_ptr(); \
} while (0)
/**
* Update the enclosing #JTEST_GROUP_t's pass/fail information using the
* current #JTEST_GROUP_t's.
*
* @param group_ptr Pointer to the current #JTEST_GROUP_t.
* @param parent_ptr Pointer to the enclosing #JTEST_GROUP_t.
*
* @warning Only run this if the current #JTEST_GROUP_t is being called within
* the context of another #JTEST_GROUP_t.
*/
#define JTEST_GROUP_UPDATE_PARENT_GROUP_PF(group_ptr, parent_group_ptr) \
do \
{ \
JTEST_GROUP_INC_PASSED(parent_group_ptr, \
(group_ptr)->passed); \
JTEST_GROUP_INC_FAILED(parent_group_ptr, \
(group_ptr)->failed); \
} while (0)
/**
* Update the #JTEST_FW's pass/fail information using the current
* #JTEST_GROUP_t's.
*/
#define JTEST_GROUP_UPDATE_FW_PF(group_ptr) \
do \
{ \
JTEST_FW_INC_PASSED((group_ptr)->passed); \
JTEST_FW_INC_FAILED((group_ptr)->failed); \
} while (0)
/**
* Update the enclosing context with the current #JTEST_GROUP_t's pass/fail
* information. If this group isn't in an enclosing group, it updates the
* #JTEST_FW's pass/fail info by default.
*/
#define JTEST_GROUP_UPDATE_PARENT_GROUP_OR_FW_PF(group_ptr, \
parent_group_ptr) \
do \
{ \
/* Update the pass fail counts in the parent group */ \
if (parent_group_ptr /* Null implies Top*/) \
{ \
JTEST_GROUP_UPDATE_PARENT_GROUP_PF( \
group_ptr, \
parent_group_ptr); \
} else { \
JTEST_GROUP_UPDATE_FW_PF( \
group_ptr); \
} \
} while (0)
/**
* Dump the results of running the #JTEST_GROUP_t to the Keil Debugger.
*/
#define JTEST_GROUP_DUMP_RESULTS(group_ptr) \
do \
{ \
JTEST_DUMP_STRF( \
"Tests Run: %" PRIu32 "\n" \
"----------\n" \
" Passed: %" PRIu32 "\n" \
" Failed: %" PRIu32 "\n", \
(group_ptr)->passed + (group_ptr)->failed, \
(group_ptr)->passed, \
(group_ptr)->failed); \
} while (0)
/**
* Call the #JTEST_GROUP_t associated with the identifier group_fn.
*/
#define JTEST_GROUP_CALL(group_fn) \
do \
{ /* Save the current group from JTEST_FW_t before swapping */ \
/* it to this group (in order to restore it later )*/ \
JTEST_GROUP_t * __jtest_temp_group_ptr = \
JTEST_CURRENT_GROUP_PTR(); \
JTEST_SET_CURRENT_GROUP(&JTEST_GROUP_STRUCT_NAME(group_fn)); \
\
/* Reset this group's pass/fail count. Each group */ \
/* should only remember counts for its last execution. */ \
JTEST_GROUP_RESET_PF(JTEST_CURRENT_GROUP_PTR()); \
\
/* Run the current group */ \
JTEST_ACT_GROUP_START(); \
JTEST_GROUP_RUN(group_fn); \
JTEST_ACT_GROUP_END(); \
\
/* Update the pass fail counts in the parent group (or FW) */ \
JTEST_GROUP_UPDATE_PARENT_GROUP_OR_FW_PF( \
JTEST_CURRENT_GROUP_PTR(), \
__jtest_temp_group_ptr); \
\
JTEST_GROUP_DUMP_RESULTS(JTEST_CURRENT_GROUP_PTR()); \
\
/* Restore the previously current group */ \
JTEST_SET_CURRENT_GROUP(__jtest_temp_group_ptr); \
} while (0)
#endif /* _JTEST_GROUP_CALL_H_ */

View File

@ -0,0 +1,87 @@
#ifndef _JTEST_GROUP_DEFINE_H_
#define _JTEST_GROUP_DEFINE_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include "jtest_util.h"
#include "jtest_define.h"
#include "jtest_group.h"
/* For defining macros with optional arguments */
#include "opt_arg/opt_arg.h"
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/**
* Prefix for all #JTEST_GROUP_t structs.
*/
#define JTEST_GROUP_STRUCT_NAME_PREFIX G_JTEST_GROUP_STRUCT_
/**
* Define test template used by #JTEST_GROUP_t tests.
*/
#define JTEST_GROUP_FN_TEMPLATE(group_fn) \
void group_fn(void)
#define JTEST_GROUP_FN_PROTOTYPE JTEST_GROUP_FN_TEMPLATE /**< Alias for
#JTEST_GROUP_FN_TEMPLATE. */
/**
* Evaluate to the name of the #JTEST_GROUP_t struct associated with group_fn.
*/
#define JTEST_GROUP_STRUCT_NAME(group_fn) \
JTEST_STRUCT_NAME(JTEST_GROUP_STRUCT_NAME_PREFIX, group_fn)
/**
* Define a #JTEST_GROUP_t struct based on the given group_fn.
*/
#define JTEST_GROUP_DEFINE_STRUCT(group_fn) \
JTEST_DEFINE_STRUCT(JTEST_GROUP_t, \
JTEST_GROUP_STRUCT_NAME(group_fn))
/**
* Declare a #JTEST_GROUP_t struct based on the given group_fn.
*/
#define JTEST_GROUP_DECLARE_STRUCT(group_fn) \
JTEST_DECLARE_STRUCT(JTEST_GROUP_DEFINE_STRUCT(group_fn))
/**
* Contents needed to initialize a JTEST_GROUP_t struct.
*/
#define JTEST_GROUP_STRUCT_INIT(group_fn) \
group_fn, \
STR_NL(group_fn), \
JTEST_PF_MEMBER_INIT
/**
* Initialize the contents of a #JTEST_GROUP_t struct.
*/
#define JTEST_GROUP_INIT(group_fn) \
JTEST_GROUP_DEFINE_STRUCT(group_fn) = { \
JTEST_GROUP_STRUCT_INIT(group_fn) \
}
/* Test Definition Macro */
/*--------------------------------------------------------------------------------*/
/**
* Define a #JTEST_GROUP_t object and a test function.
*/
#define JTEST_DEFINE_GROUP(group_fn) \
JTEST_GROUP_FN_PROTOTYPE(group_fn); \
JTEST_GROUP_INIT(group_fn); \
JTEST_GROUP_FN_PROTOTYPE(group_fn) /* Notice the lacking semicolon */
/**
* Declare a #JTEST_GROUP_t object and a test function prototype.
*/
#define JTEST_DECLARE_GROUP(group_fn) \
JTEST_GROUP_FN_PROTOTYPE(group_fn); \
JTEST_GROUP_DECLARE_STRUCT(group_fn) /* Note the lacking semicolon */
#endif /* _JTEST_GROUP_DEFINE_H_ */

View File

@ -0,0 +1,85 @@
#ifndef _JTEST_PF_H_
#define _JTEST_PF_H_
/*--------------------------------------------------------------------------------*/
/* Purpose */
/*--------------------------------------------------------------------------------*/
/* jtest_pf.h Contains macros useful for capturing pass/fail data. */
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/**
* Members that can be added to other structs to extend them pass/fail data and
* corresponding functionality.
*/
#define JTEST_PF_MEMBERS \
uint32_t passed; \
uint32_t failed /* Note the lacking semicolon*/ \
/**
* Used for initializing JTEST_PF_MEMBERS in a struct declaration.
*/
#define JTEST_PF_MEMBER_INIT \
0, \
0
/* Member-Incrementing Macros */
/*--------------------------------------------------------------------------------*/
/**
* Dispatch macro for incrementing #JTEST_PF_MEMBERS.
*
* @param xxx Values: 'passed', 'failed'
*/
#define JTEST_PF_INC_XXX(xxx, struct_pf_ptr, amount) \
do \
{ \
((struct_pf_ptr)->xxx) += (amount); \
} while (0)
/**
* Specialization of the #JTEST_PF_INC_XXX macro to increment the passed
* member.
*/
#define JTEST_PF_INC_PASSED(struct_pf_ptr, amount) \
JTEST_PF_INC_XXX(passed, struct_pf_ptr, amount)
/**
* Specialization of the #JTEST_PF_INC_XXX macro to increment the failed
* member.
*/
#define JTEST_PF_INC_FAILED(struct_pf_ptr, amount) \
JTEST_PF_INC_XXX(failed, struct_pf_ptr, amount)
/* Member-Resetting Macros */
/*--------------------------------------------------------------------------------*/
/**
* Dispatch macro for setting #JTEST_PF_MEMBERS to zero.
*
* @param xxx Values: 'passed', 'failed'
*/
#define JTEST_PF_RESET_XXX(xxx, struct_pf_ptr) \
do \
{ \
((struct_pf_ptr)->xxx) = UINT32_C(0); \
} while (0)
/**
* Specialization of #JTEST_PF_RESET_XXX for the 'passed' member.
*/
#define JTEST_PF_RESET_PASSED(struct_pf_ptr) \
JTEST_PF_RESET_XXX(passed, struct_pf_ptr)
/**
* Specialization of #JTEST_PF_RESET_XXX for the 'failed' member.
*/
#define JTEST_PF_RESET_FAILED(struct_pf_ptr) \
JTEST_PF_RESET_XXX(failed, struct_pf_ptr)
#endif /* _JTEST_PF_H_ */

View File

@ -0,0 +1,94 @@
#ifndef _JTEST_SYSTICK_H_
#define _JTEST_SYSTICK_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
/* Get access to the SysTick structure. */
#if defined ARMCM0
#include "ARMCM0.h"
#elif defined ARMCM0P
#include "ARMCM0plus.h"
#elif defined ARMCM0P_MPU
#include "ARMCM0plus_MPU.h"
#elif defined ARMCM3
#include "ARMCM3.h"
#elif defined ARMCM4
#include "ARMCM4.h"
#elif defined ARMCM4_FP
#include "ARMCM4_FP.h"
#elif defined ARMCM7
#include "ARMCM7.h"
#elif defined ARMCM7_SP
#include "ARMCM7_SP.h"
#elif defined ARMCM7_DP
#include "ARMCM7_DP.h"
#elif defined ARMSC000
#include "ARMSC000.h"
#elif defined ARMSC300
#include "ARMSC300.h"
#elif defined ARMv8MBL
#include "ARMv8MBL.h"
#elif defined ARMv8MML
#include "ARMv8MML.h"
#elif defined ARMv8MML_DSP
#include "ARMv8MML_DSP.h"
#elif defined ARMv8MML_SP
#include "ARMv8MML_SP.h"
#elif defined ARMv8MML_DSP_SP
#include "ARMv8MML_DSP_SP.h"
#elif defined ARMv8MML_DP
#include "ARMv8MML_DP.h"
#elif defined ARMv8MML_DSP_DP
#include "ARMv8MML_DSP_DP.h"
#elif defined ARMv7A
/* TODO */
#else
#warning "no appropriate header file found!"
#endif
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/**
* Initial value for the SysTick module.
*
* This is also the maximum value, important as SysTick is a decrementing counter.
*/
#define JTEST_SYSTICK_INITIAL_VALUE 0xFFFFFF
/**
* Reset the SysTick, decrementing timer to it's maximum value and disable it.
*
* This macro should leave the SysTick timer in a state that's ready for cycle
* counting.
*/
#define JTEST_SYSTICK_RESET(systick_ptr) \
do \
{ \
(systick_ptr)->CTRL = SysTick_CTRL_CLKSOURCE_Msk; \
\
(systick_ptr)->LOAD = JTEST_SYSTICK_INITIAL_VALUE; \
(systick_ptr)->VAL = JTEST_SYSTICK_INITIAL_VALUE; \
} while (0)
/**
* Start the SysTick timer, sourced by the processor clock.
*/
#define JTEST_SYSTICK_START(systick_ptr) \
do \
{ \
(systick_ptr)->CTRL = \
SysTick_CTRL_ENABLE_Msk | \
SysTick_CTRL_CLKSOURCE_Msk; \
} while (0)
/**
* Evaluate to the current value of the SysTick timer.
*/
#define JTEST_SYSTICK_VALUE(systick_ptr) \
((systick_ptr)->VAL)
#endif /* _JTEST_SYSTICK_H_ */

View File

@ -0,0 +1,100 @@
#ifndef _JTEST_TEST_H_
#define _JTEST_TEST_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include <stdint.h>
#include "jtest_util.h"
#include "jtest_test_ret.h"
/*--------------------------------------------------------------------------------*/
/* Type Definitions */
/*--------------------------------------------------------------------------------*/
/**
* A struct which represents a Test in the JTEST framework. This struct is
* used to enable, run, and describe the test it represents.
*/
typedef struct JTEST_TEST_struct
{
JTEST_TEST_RET_t ( * test_fn_ptr)(void); /**< Pointer to the test function. */
char * test_fn_str; /**< Name of the test function */
char * fut_str; /**< Name of the function under test. */
/**
* Flags that govern how the #JTEST_TEST_t behaves.
*/
union {
struct {
unsigned enabled : 1;
unsigned unused : 7;
} bits;
uint8_t byte; /* Access all flags at once. */
} flags;
} JTEST_TEST_t;
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/**
* Assign a test function to the #JTEST_TEST_t struct.
*/
#define JTEST_TEST_SET_FN(jtest_test_ptr, fn_ptr) \
JTEST_SET_STRUCT_ATTRIBUTE(jtest_test_ptr, test_fn_ptr, fn_ptr)
/**
* Specify a function under test (FUT) for the #JTEST_TEST_t struct.
*/
#define JTEST_TEST_SET_FUT(jtest_test_ptr, str) \
JTEST_SET_STRUCT_ATTRIBUTE(jtest_test_ptr, fut_str, str)
/* Macros concerning JTEST_TEST_t flags */
/*--------------------------------------------------------------------------------*/
#define JTEST_TEST_FLAG_SET 1 /**< Value of a set #JTEST_TEST_t flag. */
#define JTEST_TEST_FLAG_CLR 0 /**< Value of a cleared #JTEST_TEST_t flag. */
/**
* Evaluate to the flag in #JTEST_TEST_t having flag_name.
*/
#define JTEST_TEST_FLAG(jtest_test_ptr, flag_name) \
((jtest_test_ptr)->flags.bits.flag_name)
/**
* Dispatch macro for setting and clearing #JTEST_TEST_t flags.
*
* @param jtest_test_ptr Pointer to a #JTEST_TEST_t struct.
* @param flag_name Name of the flag to set in #JTEST_TEST_t.flags.bits
* @param xxx Vaid values: "SET" or "CLR"
*
* @note This function depends on JTEST_TEST_FLAG_SET and JTEST_TEST_FLAG_CLR.
*/
#define JTEST_TEST_XXX_FLAG(jtest_test_ptr, flag_name, xxx) \
do \
{ \
JTEST_TEST_FLAG(jtest_test_ptr, flag_name) = JTEST_TEST_FLAG_##xxx ; \
} while (0)
/**
* Specification of #JTEST_TEST_XXX_FLAG to set #JTEST_TEST_t flags.
*/
#define JTEST_TEST_SET_FLAG(jtest_test_ptr, flag_name) \
JTEST_TEST_XXX_FLAG(jtest_test_ptr, flag_name, SET)
/**
* Specification of #JTEST_TEST_XXX_FLAG to clear #JTEST_TEST_t flags.
*/
#define JTEST_TEST_CLR_FLAG(jtest_test_ptr, flag_name) \
JTEST_TEST_XXX_FLAG(jtest_test_ptr, flag_name, CLR)
/**
* Evaluate to true if the #JTEST_TEST_t is enabled.
*/
#define JTEST_TEST_IS_ENABLED(jtest_test_ptr) \
(JTEST_TEST_FLAG(jtest_test_ptr, enabled) == JTEST_TEST_FLAG_SET)
#endif /* _JTEST_TEST_H_ */

View File

@ -0,0 +1,121 @@
#ifndef _JTEST_TEST_CALL_H_
#define _JTEST_TEST_CALL_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include "jtest_test.h"
#include "jtest_test_define.h"
#include "jtest_fw.h"
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/**
* Exectute the test in the #JTEST_TEST_t struct associated with the identifier
* test_fn and store the result in retval.
*/
#define JTEST_TEST_RUN(retval, test_fn) \
do \
{ \
JTEST_DUMP_STR("Test Name:\n"); \
JTEST_DUMP_STR(JTEST_TEST_STRUCT_NAME(test_fn).test_fn_str); \
JTEST_DUMP_STR("Function Under Test:\n"); \
JTEST_DUMP_STR(JTEST_TEST_STRUCT_NAME(test_fn).fut_str); \
retval = JTEST_TEST_STRUCT_NAME(test_fn).test_fn_ptr(); \
} while (0)
/**
* Update the enclosing #JTEST_GROUP_t's pass/fail information based on
* test_retval.
*
* @param test_retval A #JTEST_TEST_RET_enum for the current test.
*
* @warning Only use if #JTEST_TEST_t is called in the context of a
* #JTEST_GROUP_t.
*/
#define JTEST_TEST_UPDATE_PARENT_GROUP_PF(test_retval) \
do \
{ \
/* Update enclosing JTEST_GROUP_t with pass/fail info */ \
if (test_retval == JTEST_TEST_PASSED) \
{ \
JTEST_GROUP_INC_PASSED(JTEST_CURRENT_GROUP_PTR(), 1); \
} else { \
JTEST_GROUP_INC_FAILED(JTEST_CURRENT_GROUP_PTR(), 1); \
} \
} while (0)
/**
* Update the #JTEST_FW with pass/fail information based on test_retval.
*
* @param test_retval A #JTEST_TEST_RET_enum for the current test.
*/
#define JTEST_TEST_UPDATE_FW_PF(test_retval) \
do \
{ \
/* Update the JTEST_FW with pass/fail info */ \
if (test_retval == JTEST_TEST_PASSED) \
{ \
JTEST_FW_INC_PASSED( 1); \
} else { \
JTEST_FW_INC_FAILED(1); \
} \
} while (0)
/**
* Update the enclosing JTEST_GROUP_t's pass/fail information, or the
* #JTEST_FW's if this test has no enclosing #JTEST_GROUP_t.
*
* @param test_retval A #JTEST_TEST_RET_enum for the current test.
*/
#define JTEST_TEST_UPDATE_PARENT_GROUP_OR_FW_PF(test_retval) \
do \
{ \
/* Update pass-fail information */ \
if (JTEST_CURRENT_GROUP_PTR() /* Non-null */) \
{ \
JTEST_TEST_UPDATE_PARENT_GROUP_PF(test_retval); \
} else { \
JTEST_TEST_UPDATE_FW_PF(test_retval); \
} \
} while (0)
/**
* Dump the results of the test to the Keil Debugger.
*/
#define JTEST_TEST_DUMP_RESULTS(test_retval) \
do \
{ \
if (test_retval == JTEST_TEST_PASSED) \
{ \
JTEST_DUMP_STR("Test Passed\n"); \
} else { \
JTEST_DUMP_STR("Test Failed\n"); \
} \
} while (0)
/**
* Call the #JTEST_TEST_t assocaited with the identifier test_fn.
*/
#define JTEST_TEST_CALL(test_fn) \
do \
{ \
if (JTEST_TEST_IS_ENABLED(&JTEST_TEST_STRUCT_NAME(test_fn))) \
{ \
/* Default to failure */ \
JTEST_TEST_RET_t __jtest_test_ret = JTEST_TEST_FAILED; \
\
JTEST_ACT_TEST_START(); \
JTEST_TEST_RUN(__jtest_test_ret, test_fn); \
\
/* Update pass-fail information */ \
JTEST_TEST_UPDATE_PARENT_GROUP_OR_FW_PF(__jtest_test_ret); \
\
JTEST_TEST_DUMP_RESULTS(__jtest_test_ret); \
JTEST_ACT_TEST_END(); \
} \
} while (0)
#endif /* _JTEST_TEST_CALL_H_ */

View File

@ -0,0 +1,133 @@
#ifndef _JTEST_TEST_DEFINE_H_
#define _JTEST_TEST_DEFINE_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include "jtest_util.h"
#include "jtest_define.h"
#include "jtest_test.h"
/* For defining macros with optional arguments */
#include "opt_arg/opt_arg.h"
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/**
* Prefix for all #JTEST_TEST_t structs.
*/
#define JTEST_TEST_STRUCT_NAME_PREFIX G_JTEST_TEST_STRUCT_
/**
* Define test template used by #JTEST_TEST_t tests.
*/
#define JTEST_TEST_FN_TEMPLATE(test_fn) \
JTEST_TEST_RET_t test_fn(void)
#define JTEST_TEST_FN_PROTOTYPE JTEST_TEST_FN_TEMPLATE /**< Alias for
* #JTEST_TEST_FN_TEMPLATE. */
/**
* Evaluate to the name of the #JTEST_TEST_t struct associated with test_fn.
*/
#define JTEST_TEST_STRUCT_NAME(test_fn) \
JTEST_STRUCT_NAME(JTEST_TEST_STRUCT_NAME_PREFIX, test_fn)
/**
* Define a #JTEST_TEST_t struct based on the given test_fn.
*/
#define JTEST_TEST_DEFINE_STRUCT(test_fn) \
JTEST_DEFINE_STRUCT(JTEST_TEST_t, \
JTEST_TEST_STRUCT_NAME(test_fn))
/**
* Declare a #JTEST_TEST_t struct based on the given test_fn.
*/
#define JTEST_TEST_DECLARE_STRUCT(test_fn) \
JTEST_DECLARE_STRUCT(JTEST_TEST_DEFINE_STRUCT(test_fn))
/**
* Contents needed to initialize a JTEST_TEST_t struct.
*/
#define JTEST_TEST_STRUCT_INIT(test_fn, fut, enable) \
test_fn, \
STR_NL(test_fn), \
STR_NL(fut), \
{ \
{ \
enable, \
0 \
} \
} \
/**
* Initialize the contents of a #JTEST_TEST_t struct.
*/
#define JTEST_TEST_INIT(test_fn, fut, enable) \
JTEST_TEST_DEFINE_STRUCT(test_fn) = { \
JTEST_TEST_STRUCT_INIT(test_fn, fut, enable) \
}
/* Test Definition Macro */
/*--------------------------------------------------------------------------------*/
/**
* Define a #JTEST_TEST_t object and a test function.
*/
#define _JTEST_DEFINE_TEST(test_fn, fut, enable) \
JTEST_TEST_FN_PROTOTYPE(test_fn); \
JTEST_TEST_INIT(test_fn, fut, enable); \
JTEST_TEST_FN_PROTOTYPE(test_fn) /* Notice the lacking semicolon */
/**
* Declare a #JTEST_TEST_t object and a test function prototype.
*/
#define JTEST_DECLARE_TEST(test_fn) \
JTEST_TEST_FN_PROTOTYPE(test_fn); \
JTEST_TEST_DECLARE_STRUCT(test_fn) /* Note the lacking semicolon */
/*--------------------------------------------------------------------------------*/
/* Macros with optional arguments */
/*--------------------------------------------------------------------------------*/
/* Top-level Interface */
#define JTEST_DEFINE_TEST(...) \
JTEST_DEFINE_TEST_(PP_NARG(__VA_ARGS__), ##__VA_ARGS__)
/* Dispatch Macro*/
#define JTEST_DEFINE_TEST_(N, ...) \
SPLICE(JTEST_DEFINE_TEST_, N)(__VA_ARGS__)
/* Default Arguments */
#define JTEST_DEFINE_TEST_DEFAULT_FUT /* Blank */
#define JTEST_DEFINE_TEST_DEFAULT_ENABLE \
JTEST_TRUE /* Tests enabled by
* default. */
/* Dispatch Cases*/
#define JTEST_DEFINE_TEST_1(_1) \
_JTEST_DEFINE_TEST( \
_1, \
JTEST_DEFINE_TEST_DEFAULT_FUT, \
JTEST_DEFINE_TEST_DEFAULT_ENABLE \
)
#define JTEST_DEFINE_TEST_2(_1, _2) \
_JTEST_DEFINE_TEST( \
_1, \
_2, \
JTEST_DEFINE_TEST_DEFAULT_ENABLE \
)
#define JTEST_DEFINE_TEST_3(_1, _2, _3) \
_JTEST_DEFINE_TEST( \
_1, \
_2, \
_3 \
)
#endif /* _JTEST_TEST_DEFINE_H_ */

View File

@ -0,0 +1,17 @@
#ifndef _JTEST_TEST_RET_H_
#define _JTEST_TEST_RET_H_
/*--------------------------------------------------------------------------------*/
/* Type Definitions */
/*--------------------------------------------------------------------------------*/
/**
* Values a #JTEST_TEST_t can return.
*/
typedef enum JTEST_TEST_RET_enum
{
JTEST_TEST_PASSED,
JTEST_TEST_FAILED
} JTEST_TEST_RET_t;
#endif /* _JTEST_TEST_RET_H_ */

View File

@ -0,0 +1,27 @@
#ifndef _JTEST_UTIL_H_
#define _JTEST_UTIL_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include "util/util.h"
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/* Define boolean values for the framework. */
#define JTEST_TRUE 1 /**< Value used for TRUE in JTEST. */
#define JTEST_FALSE 0 /**< Value used for FALSE in JTEST. */
/**
* Set the value of the attribute in the struct to by struct_ptr to value.
*/
#define JTEST_SET_STRUCT_ATTRIBUTE(struct_ptr, attribute, value) \
do \
{ \
(struct_ptr)->attribute = (value); \
} while (0)
#endif /* _JTEST_UTIL_H_ */

View File

@ -0,0 +1,15 @@
#ifndef _OPT_ARG_H_
#define _OPT_ARG_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include "pp_narg.h"
#include "splice.h"
/* If you are Joseph Jaoudi, you have a snippet which expands into an
example. If you are not Joseph, but possess his code, study the examples. If
you have no examples, turn back contact Joseph. */
#endif /* _OPT_ARG_H_ */

View File

@ -0,0 +1,25 @@
#ifndef _PP_NARG_H_
#define _PP_NARG_H_
#define PP_NARG(...) \
PP_NARG_(__VA_ARGS__,PP_RSEQ_N())
#define PP_NARG_(...) \
PP_ARG_N(__VA_ARGS__)
#define PP_ARG_N( \
_1, _2, _3, _4, _5, _6, _7, _8, _9,_10, \
_11,_12,_13,_14,_15,_16,_17,_18,_19,_20, \
_21,_22,_23,_24,_25,_26,_27,_28,_29,_30, \
_31,_32,_33,_34,_35,_36,_37,_38,_39,_40, \
_41,_42,_43,_44,_45,_46,_47,_48,_49,_50, \
_51,_52,_53,_54,_55,_56,_57,_58,_59,_60, \
_61,_62,_63,N,...) N
#define PP_RSEQ_N() \
63,62,61,60, \
59,58,57,56,55,54,53,52,51,50, \
49,48,47,46,45,44,43,42,41,40, \
39,38,37,36,35,34,33,32,31,30, \
29,28,27,26,25,24,23,22,21,20, \
19,18,17,16,15,14,13,12,11,10, \
9,8,7,6,5,4,3,2,1,0
#endif /* _PP_NARG_H_ */

View File

@ -0,0 +1,8 @@
#ifndef _SPLICE_H_
#define _SPLICE_H_
#define SPLICE(a,b) SPLICE_1(a,b)
#define SPLICE_1(a,b) SPLICE_2(a,b)
#define SPLICE_2(a,b) a##b
#endif /* _SPLICE_H_ */

View File

@ -0,0 +1,52 @@
#ifndef _UTIL_H_
#define _UTIL_H_
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
/**
* Convert a symbol to a string and add a 'NewLine'.
*/
#define STR_NL(x) STR1_NL(x)
#define STR1_NL(x) (STR2_NL(x)"\n")
#define STR2_NL(x) #x
/**
* Convert a symbol to a string.
*/
#define STR(x) STR1(x)
#define STR1(x) STR2(x)
#define STR2(x) #x
/**
* Concatenate two symbols.
*/
#define CONCAT(a, b) CONCAT1(a, b)
#define CONCAT1(a, b) CONCAT2(a, b)
#define CONCAT2(a, b) a##b
/**
* Place curly braces around a varaible number of macro arguments.
*/
#define CURLY(...) {__VA_ARGS__}
/**
* Place parenthesis around a variable number of macro arguments.
*/
#define PAREN(...) (__VA_ARGS__)
/* Standard min/max macros. */
#define MIN(x,y) (((x) < (y)) ? (x) : (y) )
#define MAX(x,y) (((x) > (y)) ? (x) : (y) )
/**
* Bound value using low and high limits.
*
* Evaluate to a number in the range, endpoint inclusive.
*/
#define BOUND(low, high, value) \
MAX(MIN(high, value), low)
#endif /* _UTIL_H_ */

View File

@ -0,0 +1,9 @@
#include "../inc/jtest_cycle.h"
#include <inttypes.h>
/*--------------------------------------------------------------------------------*/
/* Define Module Variables */
/*--------------------------------------------------------------------------------*/
/* const char * JTEST_CYCLE_STRF = "Running: %s\nCycles: %" PRIu32 "\n"; */
const char * JTEST_CYCLE_STRF = "Cycles: %" PRIu32 "\n"; /* function name + parameter string skipped */

View File

@ -0,0 +1,36 @@
#include "jtest_fw.h"
/**
* Dump the JTEST_FW.str_buffer the Keil framework in pieces.
*
* The JTEST_FW.str_buffer contains more characters than the Keil framework can
* dump at once. This function dumps them in blocks.
*/
void jtest_dump_str_segments(void)
{
uint32_t seg_idx = 0;
uint32_t memmove_idx = 0;
uint32_t seg_cnt =
(strlen(JTEST_FW.str_buffer) / JTEST_STR_MAX_OUTPUT_SIZE) + 1;
for( seg_idx = 0; seg_idx < seg_cnt; ++seg_idx)
{
JTEST_TRIGGER_ACTION(dump_str);
if (seg_idx < JTEST_STR_MAX_OUTPUT_SEGMENTS)
{
memmove_idx = 0;
while (memmove_idx < (seg_cnt - seg_idx -1) )
{
memmove(
JTEST_FW.str_buffer+
(memmove_idx* JTEST_STR_MAX_OUTPUT_SIZE),
JTEST_FW.str_buffer+
((memmove_idx+1)*JTEST_STR_MAX_OUTPUT_SIZE),
JTEST_BUF_SIZE);
++memmove_idx;
}
}
}
return;
}

View File

@ -0,0 +1,9 @@
#include "../inc/jtest.h"
/*--------------------------------------------------------------------------------*/
/* Define Global Variables */
/*--------------------------------------------------------------------------------*/
char JTEST_FW_STR_BUFFER[JTEST_BUF_SIZE] = {0};
volatile JTEST_FW_t JTEST_FW = {0};

View File

@ -0,0 +1,37 @@
#include "jtest_fw.h"
void test_start (void) {
// ;
JTEST_FW.test_start++;
}
void test_end (void) {
// ;
JTEST_FW.test_end++;
}
void group_start (void) {
// ;
JTEST_FW.group_start++;
}
void group_end (void) {
// ;
JTEST_FW.group_end++;
}
void dump_str (void) {
// ;
JTEST_FW.dump_str++;
}
void dump_data (void) {
// ;
JTEST_FW.dump_data++;
}
void exit_fw (void) {
// ;
JTEST_FW.exit_fw++;
}

View File

@ -0,0 +1,9 @@
#ifndef _ALL_TESTS_H_
#define _ALL_TESTS_H_
/*--------------------------------------------------------------------------------*/
/* Declare Test Groups */
/*--------------------------------------------------------------------------------*/
JTEST_DECLARE_GROUP(all_tests);
#endif /* _ALL_TESTS_H_ */

View File

@ -0,0 +1,267 @@
#ifndef _BASIC_MATH_TEMPLATES_H_
#define _BASIC_MATH_TEMPLATES_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include "test_templates.h"
/*--------------------------------------------------------------------------------*/
/* Group Specific Templates */
/*--------------------------------------------------------------------------------*/
/**
* Compare the outputs used by basic math tests for the function under test and
* the reference function.
*/
#define BASIC_MATH_COMPARE_INTERFACE(block_size, output_type) \
TEST_ASSERT_BUFFERS_EQUAL( \
basic_math_output_ref.data_ptr, \
basic_math_output_fut.data_ptr, \
block_size * sizeof(output_type))
/*
* Comparison SNR thresholds for the data types used in basic_math_tests.
*/
#define BASIC_MATH_SNR_THRESHOLD_float32_t 120
#define BASIC_MATH_SNR_THRESHOLD_q31_t 100
#define BASIC_MATH_SNR_THRESHOLD_q15_t 75
#define BASIC_MATH_SNR_THRESHOLD_q7_t 25
/**
* Compare reference and fut outputs using SNR.
*
* @note The outputs are converted to float32_t before comparison.
*/
#define BASIC_MATH_SNR_COMPARE_INTERFACE(block_size, output_type) \
do \
{ \
TEST_CONVERT_AND_ASSERT_SNR( \
basic_math_output_f32_ref, \
basic_math_output_ref.data_ptr, \
basic_math_output_f32_fut, \
basic_math_output_fut.data_ptr, \
block_size, \
output_type, \
BASIC_MATH_SNR_THRESHOLD_##output_type \
); \
} while (0)
/**
* Compare reference and fut outputs using SNR.
*
* @note The outputs are converted to float32_t before comparison.
*/
#define BASIC_MATH_SNR_ELT1_COMPARE_INTERFACE(block_size, output_type) \
do \
{ \
TEST_CONVERT_AND_ASSERT_SNR( \
basic_math_output_f32_ref, \
basic_math_output_ref.data_ptr, \
basic_math_output_f32_fut, \
basic_math_output_fut.data_ptr, \
1, \
output_type, \
BASIC_MATH_SNR_THRESHOLD_##output_type \
); \
} while (0)
/*--------------------------------------------------------------------------------*/
/* Input Interfaces */
/*--------------------------------------------------------------------------------*/
/*
* General:
* Input interfaces provide inputs to functions inside test templates. They
* ONLY provide the inputs. The output variables should be hard coded.
*
* The input interfaces must have the following format:
*
* ARM_xxx_INPUT_INTERFACE() or
* REF_xxx_INPUT_INTERFACE()
*
* The xxx must be lowercase, and is intended to be the indentifying substring
* in the function's name. Acceptable values are 'sub' or 'add' from the
* functions arm_add_q31.
*/
#define ARM_abs_INPUT_INTERFACE(input, block_size) \
PAREN(input, basic_math_output_fut.data_ptr, block_size)
#define REF_abs_INPUT_INTERFACE(input, block_size) \
PAREN(input, basic_math_output_ref.data_ptr, block_size)
#define ARM_add_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, basic_math_output_fut.data_ptr, block_size) \
#define REF_add_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, basic_math_output_ref.data_ptr, block_size) \
#define ARM_dot_prod_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, block_size, basic_math_output_fut.data_ptr) \
#define REF_dot_prod_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, block_size, basic_math_output_ref.data_ptr) \
#define ARM_mult_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, basic_math_output_fut.data_ptr, block_size) \
#define REF_mult_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, basic_math_output_ref.data_ptr, block_size) \
#define ARM_negate_INPUT_INTERFACE(input, block_size) \
PAREN(input, basic_math_output_fut.data_ptr, block_size)
#define REF_negate_INPUT_INTERFACE(input, block_size) \
PAREN(input, basic_math_output_ref.data_ptr, block_size)
#define ARM_offset_INPUT_INTERFACE(input, elt, block_size) \
PAREN(input, elt, basic_math_output_fut.data_ptr, block_size) \
#define REF_offset_INPUT_INTERFACE(input, elt, block_size) \
PAREN(input, elt, basic_math_output_ref.data_ptr, block_size) \
#define ARM_shift_INPUT_INTERFACE(input, elt, block_size) \
PAREN(input, elt, basic_math_output_fut.data_ptr, block_size) \
#define REF_shift_INPUT_INTERFACE(input, elt, block_size) \
PAREN(input, elt, basic_math_output_ref.data_ptr, block_size) \
#define ARM_scale_float_INPUT_INTERFACE(input, elt, block_size) \
PAREN(input, elt, basic_math_output_fut.data_ptr, block_size) \
#define REF_scale_float_INPUT_INTERFACE(input, elt, block_size) \
PAREN(input, elt, basic_math_output_ref.data_ptr, block_size) \
/* These two are for the fixed point functions */
#define ARM_scale_INPUT_INTERFACE(input, elt1, elt2, block_size) \
PAREN(input, elt1, elt2, basic_math_output_fut.data_ptr, block_size) \
#define REF_scale_INPUT_INTERFACE(input, elt1, elt2, block_size) \
PAREN(input, elt1, elt2, basic_math_output_ref.data_ptr, block_size) \
#define ARM_sub_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, basic_math_output_fut.data_ptr, block_size) \
#define REF_sub_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, basic_math_output_ref.data_ptr, block_size) \
/*--------------------------------------------------------------------------------*/
/* Test Templates */
/*--------------------------------------------------------------------------------*/
/**
* Specialization of #TEST_TEMPLATE_BUF1_BLK() for basic math tests.
*
* @note This macro relies on the existance of ARM_xxx_INPUT_INTERFACE and
* REF_xxx_INPUT_INTERFACEs.
*/
#define BASIC_MATH_DEFINE_TEST_TEMPLATE_BUF1_BLK(fn_name, \
suffix, \
input_type, \
output_type) \
JTEST_DEFINE_TEST(arm_##fn_name##_##suffix##_test, \
arm_##fn_name##_##suffix) \
{ \
TEST_TEMPLATE_BUF1_BLK( \
basic_math_f_all, \
basic_math_block_sizes, \
input_type, \
output_type, \
arm_##fn_name##_##suffix, \
ARM_##fn_name##_INPUT_INTERFACE, \
ref_##fn_name##_##suffix, \
REF_##fn_name##_INPUT_INTERFACE, \
BASIC_MATH_COMPARE_INTERFACE); \
}
/**
* Specialization of #TEST_TEMPLATE_BUF2_BLK() for basic math tests.
*
* @note This macro relies on the existance of ARM_xxx_INPUT_INTERFACE and
* REF_xxx_INPUT_INTERFACEs.
*/
#define BASIC_MATH_DEFINE_TEST_TEMPLATE_BUF2_BLK(fn_name, \
suffix, \
input_type, \
output_type, \
comparison_interface) \
JTEST_DEFINE_TEST(arm_##fn_name##_##suffix##_test, \
arm_##fn_name##_##suffix) \
{ \
TEST_TEMPLATE_BUF2_BLK( \
basic_math_f_all, \
basic_math_f_all, \
basic_math_block_sizes, \
input_type, \
output_type, \
arm_##fn_name##_##suffix, \
ARM_##fn_name##_INPUT_INTERFACE, \
ref_##fn_name##_##suffix, \
REF_##fn_name##_INPUT_INTERFACE, \
comparison_interface); \
}
/**
* Specialization of #TEST_TEMPLATE_BUF1_ELT1_BLK() for basic math tests.
*
* @note This macro relies on the existance of ARM_xxx_INPUT_INTERFACE and
* REF_xxx_INPUT_INTERFACEs.
*/
#define BASIC_MATH_DEFINE_TEST_TEMPLATE_BUF1_ELT1_BLK(fn_name, \
suffix, \
input_type, \
elt_type, \
output_type) \
JTEST_DEFINE_TEST(arm_##fn_name##_##suffix##_test, \
arm_##fn_name##_##suffix) \
{ \
TEST_TEMPLATE_BUF1_ELT1_BLK( \
basic_math_f_all, \
basic_math_elts, \
basic_math_block_sizes, \
input_type, \
elt_type, \
output_type, \
arm_##fn_name##_##suffix, \
ARM_##fn_name##_INPUT_INTERFACE, \
ref_##fn_name##_##suffix, \
REF_##fn_name##_INPUT_INTERFACE, \
BASIC_MATH_COMPARE_INTERFACE); \
}
/**
* Specialization of #TEST_TEMPLATE_BUF1_ELT2_BLK() for basic math tests.
*
* @note This macro relies on the existance of ARM_xxx_INPUT_INTERFACE and
* REF_xxx_INPUT_INTERFACEs.
*/
#define BASIC_MATH_DEFINE_TEST_TEMPLATE_BUF1_ELT2_BLK(fn_name, \
suffix, \
input_type, \
elt1_type, \
elt2_type, \
output_type) \
JTEST_DEFINE_TEST(arm_##fn_name##_##suffix##_test, \
arm_##fn_name##_##suffix) \
{ \
TEST_TEMPLATE_BUF1_ELT2_BLK( \
basic_math_f_all, \
basic_math_elts, \
basic_math_elts2, \
basic_math_block_sizes, \
input_type, \
elt1_type, \
elt2_type, \
output_type, \
arm_##fn_name##_##suffix, \
ARM_##fn_name##_INPUT_INTERFACE, \
ref_##fn_name##_##suffix, \
REF_##fn_name##_INPUT_INTERFACE, \
BASIC_MATH_COMPARE_INTERFACE); \
}
#endif /* _BASIC_MATH_TEMPLATES_H_ */

View File

@ -0,0 +1,46 @@
#ifndef ARM_BASIC_MATH_TEST_DATA_H
#define ARM_BASIC_MATH_TEST_DATA_H
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include "arr_desc.h"
#include "arm_math.h"
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
#define BASIC_MATH_MAX_INPUT_ELEMENTS 32
#define BASIC_MATH_BIGGEST_INPUT_TYPE float32_t
/*--------------------------------------------------------------------------------*/
/* Declare Variables */
/*--------------------------------------------------------------------------------*/
/* Input/Output Buffers */
ARR_DESC_DECLARE(basic_math_output_fut);
ARR_DESC_DECLARE(basic_math_output_ref);
extern BASIC_MATH_BIGGEST_INPUT_TYPE
basic_math_output_f32_ref[BASIC_MATH_MAX_INPUT_ELEMENTS];
extern BASIC_MATH_BIGGEST_INPUT_TYPE
basic_math_output_f32_fut[BASIC_MATH_MAX_INPUT_ELEMENTS];
/* Block Sizes*/
ARR_DESC_DECLARE(basic_math_block_sizes);
/* Numbers */
ARR_DESC_DECLARE(basic_math_elts);
ARR_DESC_DECLARE(basic_math_elts2);
ARR_DESC_DECLARE(basic_math_eltsf);
/* Float Inputs */
ARR_DESC_DECLARE(basic_math_zeros);
ARR_DESC_DECLARE(basic_math_f_2);
ARR_DESC_DECLARE(basic_math_f_15);
ARR_DESC_DECLARE(basic_math_f_32);
ARR_DESC_DECLARE(basic_math_f_all);
#endif

View File

@ -0,0 +1,9 @@
#ifndef _BASIC_MATH_TEST_GROUP_H_
#define _BASIC_MATH_TEST_GROUP_H_
/*--------------------------------------------------------------------------------*/
/* Declare Test Groups */
/*--------------------------------------------------------------------------------*/
JTEST_DECLARE_GROUP(basic_math_tests);
#endif /* _BASIC_MATH_TEST_GROUP_H_ */

View File

@ -0,0 +1,17 @@
#ifndef _BASIC_MATH_TESTS_H_
#define _BASIC_MATH_TESTS_H_
/*--------------------------------------------------------------------------------*/
/* Test/Group Declarations */
/*--------------------------------------------------------------------------------*/
JTEST_DECLARE_GROUP(abs_tests);
JTEST_DECLARE_GROUP(add_tests);
JTEST_DECLARE_GROUP(dot_prod_tests);
JTEST_DECLARE_GROUP(mult_tests);
JTEST_DECLARE_GROUP(negate_tests);
JTEST_DECLARE_GROUP(offset_tests);
JTEST_DECLARE_GROUP(scale_tests);
JTEST_DECLARE_GROUP(shift_tests);
JTEST_DECLARE_GROUP(sub_tests);
#endif /* _BASIC_MATH_TESTS_H_ */

View File

@ -0,0 +1,222 @@
#ifndef _COMPLEX_MATH_TEMPLATES_H_
#define _COMPLEX_MATH_TEMPLATES_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include "test_templates.h"
/*--------------------------------------------------------------------------------*/
/* Group Specific Templates */
/*--------------------------------------------------------------------------------*/
/**
* Compare the real outputs from the function under test and the reference
* function.
*/
#define COMPLEX_MATH_COMPARE_RE_INTERFACE(block_size, output_type) \
TEST_ASSERT_BUFFERS_EQUAL( \
complex_math_output_ref_a.data_ptr, \
complex_math_output_fut_a.data_ptr, \
block_size * sizeof(output_type))
/**
* Compare the real and imaginary outputs from the function under test and the
* reference function.
*/
#define COMPLEX_MATH_COMPARE_CMPLX_INTERFACE(block_size, output_type) \
do \
{ \
COMPLEX_MATH_COMPARE_RE_INTERFACE(block_size * 2, output_type); \
} while (0)
/*
* Comparison SNR thresholds for the data types used in complex_math_tests.
*/
#define COMPLEX_MATH_SNR_THRESHOLD_float32_t 120
#define COMPLEX_MATH_SNR_THRESHOLD_q31_t 100
#define COMPLEX_MATH_SNR_THRESHOLD_q15_t 75
/**
* Compare reference and fut outputs using SNR.
*
* The output_suffix specifies which output buffers to use for the
* comparison. An output_suffix of 'a' expands to the following buffers:
*
* - complex_math_output_f32_ref_a
* - complex_math_output_f32_fut_a
* - complex_math_output_ref_a
* - complex_math_output_fut_a
*
* @note The outputs are converted to float32_t before comparison.
*/
#define COMPLEX_MATH_SNR_COMPARE_OUT_INTERFACE(block_size, \
output_type, \
output_suffix) \
do \
{ \
TEST_CONVERT_AND_ASSERT_SNR( \
complex_math_output_f32_ref_##output_suffix, \
complex_math_output_ref_##output_suffix.data_ptr, \
complex_math_output_f32_fut_##output_suffix, \
complex_math_output_fut_##output_suffix.data_ptr, \
block_size, \
output_type, \
COMPLEX_MATH_SNR_THRESHOLD_##output_type \
); \
} while (0)
/**
* Specification of #COMPLEX_MATH_SNR_COMPARE_INTERFACE() for real outputs.
*/
#define COMPLEX_MATH_SNR_COMPARE_RE_INTERFACE(block_size, \
output_type) \
COMPLEX_MATH_SNR_COMPARE_OUT_INTERFACE(block_size, \
output_type, \
a)
/**
* Specification of #COMPLEX_MATH_SNR_COMPARE_INTERFACE() for complex outputs.
*/
#define COMPLEX_MATH_SNR_COMPARE_CMPLX_INTERFACE(block_size, \
output_type) \
COMPLEX_MATH_SNR_COMPARE_OUT_INTERFACE(block_size * 2, \
output_type, \
a)
/**
* Compare reference and fut split outputs using SNR.
*
* 'Split' refers to two separate output buffers; one for real and one for
* complex.
*/
#define COMPLEX_MATH_SNR_COMPARE_SPLIT_INTERFACE(block_size, \
output_type) \
do \
{ \
COMPLEX_MATH_SNR_COMPARE_OUT_INTERFACE(block_size, \
output_type, \
a); \
COMPLEX_MATH_SNR_COMPARE_OUT_INTERFACE(block_size, \
output_type, \
b); \
} while (0)
/*--------------------------------------------------------------------------------*/
/* Input Interfaces */
/*--------------------------------------------------------------------------------*/
/*
* General:
* Input interfaces provide inputs to functions inside test templates. They
* ONLY provide the inputs. The output variables should be hard coded.
*
* The input interfaces must have the following format:
*
* ARM_xxx_INPUT_INTERFACE() or
* REF_xxx_INPUT_INTERFACE()
*
* The xxx must be lowercase, and is intended to be the indentifying substring
* in the function's name. Acceptable values are 'sub' or 'add' from the
* functions arm_add_q31.
*/
#define ARM_cmplx_conj_INPUT_INTERFACE(input, block_size) \
PAREN(input, complex_math_output_fut_a.data_ptr, block_size)
#define REF_cmplx_conj_INPUT_INTERFACE(input, block_size) \
PAREN(input, complex_math_output_ref_a.data_ptr, block_size)
#define ARM_cmplx_dot_prod_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, block_size, \
complex_math_output_fut_a.data_ptr, \
complex_math_output_fut_b.data_ptr)
#define REF_cmplx_dot_prod_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, block_size, \
complex_math_output_ref_a.data_ptr, \
complex_math_output_ref_b.data_ptr)
#define ARM_cmplx_mag_INPUT_INTERFACE(input, block_size) \
PAREN(input, complex_math_output_fut_a.data_ptr, block_size)
#define REF_cmplx_mag_INPUT_INTERFACE(input, block_size) \
PAREN(input, complex_math_output_ref_a.data_ptr, block_size)
#define ARM_cmplx_mag_squared_INPUT_INTERFACE(input, block_size) \
PAREN(input, complex_math_output_fut_a.data_ptr, block_size)
#define REF_cmplx_mag_squared_INPUT_INTERFACE(input, block_size) \
PAREN(input, complex_math_output_ref_a.data_ptr, block_size)
#define ARM_cmplx_mult_cmplx_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, complex_math_output_fut_a.data_ptr, block_size)
#define REF_cmplx_mult_cmplx_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, complex_math_output_ref_a.data_ptr, block_size)
#define ARM_cmplx_mult_real_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, complex_math_output_fut_a.data_ptr, block_size)
#define REF_cmplx_mult_real_INPUT_INTERFACE(input_a, input_b, block_size) \
PAREN(input_a, input_b, complex_math_output_ref_a.data_ptr, block_size)
/*--------------------------------------------------------------------------------*/
/* Test Templates */
/*--------------------------------------------------------------------------------*/
/**
* Specialization of #TEST_TEMPLATE_BUF1_BLK() for complex math tests.
*
* @note This macro relies on the existance of ARM_xxx_INPUT_INTERFACE and
* REF_xxx_INPUT_INTERFACEs.
*/
#define COMPLEX_MATH_DEFINE_TEST_TEMPLATE_BUF1_BLK(fn_name, \
suffix, \
input_type, \
output_type, \
comparison_interface) \
JTEST_DEFINE_TEST(arm_##fn_name##_##suffix##_test, \
arm_##fn_name##_##suffix) \
{ \
TEST_TEMPLATE_BUF1_BLK( \
complex_math_f_all, \
complex_math_block_sizes, \
input_type, \
output_type, \
arm_##fn_name##_##suffix, \
ARM_##fn_name##_INPUT_INTERFACE, \
ref_##fn_name##_##suffix, \
REF_##fn_name##_INPUT_INTERFACE, \
comparison_interface); \
}
/**
* Specialization of #TEST_TEMPLATE_BUF2_BLK1() for complex math tests.
*
* @note This macro relies on the existance of ARM_xxx_INPUT_INTERFACE and
* REF_xxx_INPUT_INTERFACEs.
*/
#define COMPLEX_MATH_DEFINE_TEST_TEMPLATE_BUF2_BLK(fn_name, \
suffix, \
input_type, \
output_type, \
comparison_interface) \
JTEST_DEFINE_TEST(arm_##fn_name##_##suffix##_test, \
arm_##fn_name##_##suffix) \
{ \
TEST_TEMPLATE_BUF2_BLK( \
complex_math_f_all, \
complex_math_f_all, \
complex_math_block_sizes, \
input_type, \
output_type, \
arm_##fn_name##_##suffix, \
ARM_##fn_name##_INPUT_INTERFACE, \
ref_##fn_name##_##suffix, \
REF_##fn_name##_INPUT_INTERFACE, \
comparison_interface); \
}
#endif /* _COMPLEX_MATH_TEMPLATES_H_ */

View File

@ -0,0 +1,50 @@
#ifndef _COMPLEX_MATH_TEST_DATA_H_
#define _COMPLEX_MATH_TEST_DATA_H_
/*--------------------------------------------------------------------------------*/
/* Includes */
/*--------------------------------------------------------------------------------*/
#include "arr_desc.h"
#include "arm_math.h"
/*--------------------------------------------------------------------------------*/
/* Macros and Defines */
/*--------------------------------------------------------------------------------*/
#define COMPLEX_MATH_MAX_INPUT_ELEMENTS 32
#define COMPLEX_MATH_BIGGEST_INPUT_TYPE float32_t
/*--------------------------------------------------------------------------------*/
/* Decalare Variables */
/*--------------------------------------------------------------------------------*/
/* Input/Output Buffers */
ARR_DESC_DECLARE(complex_math_output_fut_a);
ARR_DESC_DECLARE(complex_math_output_fut_b);
ARR_DESC_DECLARE(complex_math_output_ref_a);
ARR_DESC_DECLARE(complex_math_output_ref_b);
extern COMPLEX_MATH_BIGGEST_INPUT_TYPE
complex_math_output_f32_ref_a[COMPLEX_MATH_MAX_INPUT_ELEMENTS * 2];
extern COMPLEX_MATH_BIGGEST_INPUT_TYPE
complex_math_output_f32_ref_b[COMPLEX_MATH_MAX_INPUT_ELEMENTS * 2];
extern COMPLEX_MATH_BIGGEST_INPUT_TYPE
complex_math_output_f32_fut_a[COMPLEX_MATH_MAX_INPUT_ELEMENTS * 2];
extern COMPLEX_MATH_BIGGEST_INPUT_TYPE
complex_math_output_f32_fut_b[COMPLEX_MATH_MAX_INPUT_ELEMENTS * 2];
/* Block Sizes*/
ARR_DESC_DECLARE(complex_math_block_sizes);
/* Float Inputs */
ARR_DESC_DECLARE(complex_math_zeros);
ARR_DESC_DECLARE(complex_math_f_2);
ARR_DESC_DECLARE(complex_math_f_15);
ARR_DESC_DECLARE(complex_math_f_32);
ARR_DESC_DECLARE(complex_math_f_all);
#endif /* _COMPLEX_MATH_TEST_DATA_H_ */

View File

@ -0,0 +1,9 @@
#ifndef _COMPLEX_MATH_TEST_GROUP_H_
#define _COMPLEX_MATH_TEST_GROUP_H_
/*--------------------------------------------------------------------------------*/
/* Declare Test Groups */
/*--------------------------------------------------------------------------------*/
JTEST_DECLARE_GROUP(complex_math_tests);
#endif /* _COMPLEX_MATH_TEST_GROUP_H_ */

View File

@ -0,0 +1,14 @@
#ifndef _COMPLEX_MATH_TESTS_H_
#define _COMPLEX_MATH_TESTS_H_
/*--------------------------------------------------------------------------------*/
/* Test/Group Declarations */
/*--------------------------------------------------------------------------------*/
JTEST_DECLARE_GROUP(cmplx_conj_tests);
JTEST_DECLARE_GROUP(cmplx_dot_prod_tests);
JTEST_DECLARE_GROUP(cmplx_mag_tests);
JTEST_DECLARE_GROUP(cmplx_mag_squared_tests);
JTEST_DECLARE_GROUP(cmplx_mult_cmplx_tests);
JTEST_DECLARE_GROUP(cmplx_mult_real_tests);
#endif /* _COMPLEX_MATH_TESTS_H_ */

Some files were not shown because too many files have changed in this diff Show More