Cons-n-Stuff/geki_pico
1
0
Fork 0
mirror of https://github.com/whowechina/geki_pico.git synced 2025-01-31 19:55:21 +01:00
Code Issues Actions Packages Projects Releases Wiki Activity

Improve lever combo

Browse Source
This commit is contained in:
whowechina 2024-10-14 19:45:45 +08:00
parent e370fcc4a2
commit 471bda929a
8 changed files with 6 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
Production/3DPrint/geki_pico_lever_fixer.stl
View File

Binary file not shown.

BIN
Production/3DPrint/geki_pico_lever_rotator_5mm.stl Normal file
View File

Binary file not shown.

BIN
Production/3DPrint/geki_pico_lever_rotator_6mm .stl Normal file
View File

Binary file not shown.

BIN
Production/3DPrint/geki_pico_lever_shaft_5mm.stl
View File

Binary file not shown.

BIN
Production/3DPrint/geki_pico_lever_shaft_6mm.stl
View File

Binary file not shown.

BIN
Production/3DPrint/geki_pico_top.3mf
View File

Binary file not shown.

6
README.md
View File

@ -140,13 +140,13 @@ You need to rotate 135 degrees on Z axis to fit the bed.
https://www.amazon.com/METALLIXITY-Double-Screws-Stainless-Threaded/dp/B0B7BX3CYH
* 1x round magnet with **5mm** or **6mm** diameter, **2mm** to **3.5mm** tall, MUST be radially/diametrically magnetized (N-S poles on the curved side).
https://wargameportal.com/products/special-diametrically-magnetized-50pcs-5mm-x-2mm-3-16-x-1-16-disc-magnets?variant=49014932209942
* 6x **M2*5mm regular screws** for resistance adjustment.
* 6x **M2*6mm regular screws** for resistance adjustment.
* 4x **M2*16mm regular screws** for fixing the bearings.
* Optional: Some keyboard switch lubricant.
* Optional: Some damping grease.
* Assemble Steps
1. Print out the parts.
<img src="doc/lever_print_1.jpg" width="40%"> <img src="doc/lever_print_2.jpg" width="40%">
2. Stick PTFE/UHMW tape to the sliding surfaces of the fixer and the shaft. Then trim the tape to match the surface shape. If you have some keyboard switch lubricant, apply a tiny bit on the sliding surfaces. Turn the M2*5mm screws into the bearing fixers halfway, don’t and never tighten them.
2. Stick PTFE/UHMW tape to the sliding surfaces of the fixer and the shaft. Then trim the tape to match the surface shape. If you have some damping grease (medium or medium-high stickiness), apply a tiny bit on the sliding surfaces. Turn the M2*6mm screws into the bearing fixers halfway, don’t and never tighten them.
<img src="doc/sliding_surface_1.jpg" width="30%"> <img src="doc/sliding_surface_2.jpg" width="30%"> <img src="doc/sliding_surface_3.jpg" width="15%">
3. Install the 2 bearings on both sides of the shaft and put it in the base, then use M2*16mm screws to fix the two bearing fixers on the base.
<img src="doc/install_shaft_1.jpg" width="25%"> <img src="doc/install_shaft_2.jpg" width="25%">

6
README_CN.md
View File

@ -140,14 +140,14 @@
https://www.amazon.com/METALLIXITY-Double-Screws-Stainless-Threaded/dp/B0B7BX3CYH
* 1x 圆形小磁铁，直径 **5mm** 或者 **6mm**，厚度 **2mm** 到 **3.5mm**，必须是径向充磁的，也就是磁铁两极是在圆弧面上。
https://wargameportal.com/products/special-diametrically-magnetized-50pcs-5mm-x-2mm-3-16-x-1-16-disc-magnets?variant=49014932209942
* 6x **M2*5mm 螺丝** 用于阻尼调整。
* 6x **M2*6mm 螺丝** 用于阻尼调整。
* 4x **M2*16mm 螺丝** 用于固定轴承。
* 可选: 键轴润滑剂。
* 可选: 阻尼脂。
* 组装过程
1. 打印相关的零件
<img src="doc/lever_print_1.jpg" width="40%"> <img src="doc/lever_print_2.jpg" width="40%">
2. 把 PTFE/UHMW 胶带贴在摇杆和轴的滑动表面上，然后大致修剪成相应的形状。如果你有键盘轴润滑剂，可以在滑动表面涂一丁点。然后把 M2*5mm 螺丝半拧入轴承固定器，注意不要拧紧。
2. 把 PTFE/UHMW 胶带贴在摇杆和轴的滑动表面上，然后大致修剪成相应的形状。如果你有中或中高粘度的阻尼脂，可以在滑动表面涂一丁点。然后把 M2*6mm 螺丝半拧入轴承固定器，注意不要拧紧。
<img src="doc/sliding_surface_1.jpg" width="30%"> <img src="doc/sliding_surface_2.jpg" width="30%"> <img src="doc/sliding_surface_3.jpg" width="15%">
3. 把 2 个轴承固定器固定在底座上，然后用 M2*16mm 螺丝固定轴承。
<img src="doc/install_shaft_1.jpg" width="25%"> <img src="doc/install_shaft_2.jpg" width="25%">