Cons-n-Stuff/iidx_pico
1
0
Fork 0
mirror of https://github.com/whowechina/iidx_pico.git synced 2025-02-21 04:47:15 +01:00
Code Releases Activity

Minor updates.

Browse Source
This commit is contained in:
whowechina 2023-04-01 21:24:26 +08:00
parent 4bfa64a51f
commit 2fecc72b3f
1 changed files with 6 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
README.md
View File

@ -30,9 +30,9 @@ Move forward only if you're REALLY interested.
## HOW TO BUILD
### Turntable Materials
* 1x AS5600 hall angular sensor board (23mm\*23mm)
<img src="doc/as5600.png" width="150px">
* 1x 6mm\*2mm magnet (should be magnetized in radial direction), sometimes comes with the AS5600 board.
* 1x AS5600 hall angular sensor board set (23mm\*23mm)
<img src="doc/as5600.png" width="150px">
* 1x 6mm\*2mm magnet (must be radially magnetized), normally comes with the AS5600 board set.
* 1x 61804-2RS deep groove ball bearing (20x32x7mm), normally < 5US$;
* 3x M4*10mm screws (large flat head is better) and hex nuts.
@ -52,9 +52,10 @@ Move forward only if you're REALLY interested.
* 2x 0603 10ohm resistor.
* 5x 0805 1uF capacitors.
### The Cable
### Detachable Cable
* 1x HDMI cable (ultra slim, diameter < 4mm), at least 50cm in length, we'll cut the HDMI connectors off, so pick a cheap one.
* 2X Magnetic pogopin connector sets, male and female. PCB side should use 90-degree pins, cable side use straight pins.
* 2X Magnetic pogopin connector sets, male and female. PCB side should use ones with 90-degree pins, cable side use ones with straight pins.
<img src="doc/pogopin.jpg" width="300px">
### Step 1 - Buy
### Step 2 - Solder