Tomasz Moń 804a40830e Fix race conditions and misconfiguration in sdmmc ... Properly configure pull up and pull down offsets for autocal. Run autocal prior to every transfer. Prevent race conditions in sdmmc_wait_for_event() - make sure the fault handler has highest priority, then the target irq, state conditions and finally the error mask. Do not clear all bits (|=) when acknowledging fault conditions, only acknowledge the fault conditions itself. Enable interrupts before preparing command registers - if sdmmc is fast enough it can actually finish transfer before we enabled the interrupts. Enabling interrupts clears the COMMAND COMPLETE status bit. Temporarily print all the sdmmc messages in stage2 - for yet unknown reason respecting the log level results in some failures. This results in working microsd card in stage2 on my switch with Samsung EVO+ 256GB microsd card.		2018-06-09 17:37:53 +02:00
..
src	Fix race conditions and misconfiguration in sdmmc	2018-06-09 17:37:53 +02:00
linker.ld	Refactor fusee's makefile	2018-05-27 00:59:02 +02:00
linker.specs	Revamp all the Makefiles (thanks @fincs @WinterMute)	2018-05-19 01:07:27 +02:00
Makefile	package2 verification and ini1 merging fixes (#125)	2018-06-04 14:04:44 -07:00