arcade-docs/andamiro/board.md

Andamiro boards

MIDAS

• Developed with focus on 2D games
• Reengineered NeoGeo

SPACE

• Developed with focus on 3D games
• PC platform

The oldest piece of hardware used for Pump It Up we have seen in the wild was a MK3 board so far. But there are several hints that some piece of hardware pre-dating the MK3 existed at some point:

• The first three Pump It Up games, 1st, 2nd and 3rd/OBG,
  are storing their music as actual CD audio, not MP3 files in the data area of the discs
• MP3 hardware decoder chips were likely not cheap/easily available at that time. Furthermore, the total audio length of all songs still fit onto the disc as CD audio tracks
• The first three Pump It Up games did not use a lock-chip as a means for copy-protection. Possible, that this piece of hardware wasn't available from the beginning and therefore not used

Compatible games

• Pump it Up: The 1st Dance Floor
• Pump it Up: The 2nd Dance Floor
• Pump it Up The O.B.G: The 3rd Dance Floor

MK3

• Custom PCB assembly with daughter boards stacked
• DOS OS stored on ROM chip
• Games stored and loaded from CD
• PIUIO interface connected via ISA Bus
• Hardware audio decoder chip for MP3 audio
• CAT702 ZN security "Lock chip" for copy-protection
• EEPROM to store game settings

System Configuration using DOS PC-Doctor

System configuration dump with DOS PC-Doctor. The HDD listed in the information below is part of the system that was used to dump this information. The DVD drive is a replacement of a likely broken CD drive.

SYSTEM CONFIGURATION=====================================================

     Operating System - DOS 7.10 in HMA
             CPU Type - 333 MHz Intel Celeron 333
                CPUID - "GenuineIntel", Family 6, Model 6, Step 5
                      - MMX available
     Coprocessor Type - 686
   Expansion Bus Type - ISA, PCI
        ROM BIOS Date - 04/20/99 
   ROM BIOS Copyright - COPYRIGHT Award Software Inc.
       Additional ROM - C800[8kB] 
          Base Memory - 640 kB
      Expanded Memory - N/A
      Extended Memory - 64512 kB (CMOS Configuration)
           XMS Memory - 62400 kB (XMS 3.00, Driver 3.95) A20=ON 
         Serial Ports - None Installed
       Parallel Ports - None Installed
        Video Adapter - VGA: 3Dfx Interactive, Inc.
                      - Total Memory : 8192 kB
    Fixed Disk Drives - 42 MB  
   Floppy Disk Drives - 1 - 1=3.5"/1.44M  
                Mouse - No Mouse
            Joysticks - None
           Sound Card - N/A
   CAS Fax/Modem Card - N/A
     Disk Compression - N/A
CD-ROM Driver Version - MSCDEX V2.25, Drive: D:
           Disk Cache - Smartdrive 5.02, Hits 76%, Size 2048 kB
   Primary IDE Master - ATAPI: HL-DT-STDVD-ROM GDR8164B
    Primary IDE Slave - IDE: QUANTUM FIREBALL_TM1280A, S/N:692708422782
 Secondary IDE Master - No Drive
  Secondary IDE Slave - No Drive
                 SCSI - N/A
              Network - N/A
     Power Management - APM V1.2, Power On
             USB Port - Installed on IRQ 10
         Chipset Type - Intel 440BX
        L2 Cache Type - 128 kB
           DRAM Row 0 - 64 MB
           DRAM Row 1 - Empty
           DRAM Row 2 - Empty
           DRAM Row 3 - Empty
           DRAM Row 4 - Empty
           DRAM Row 5 - Empty
           DRAM Row 6 - Empty
           DRAM Row 7 - Empty


PC-DOCTOR DOS 3.0 Copyr 2004 PC-Doctor, Inc. 16:15 9/25/2000

On-board chips

• Audio related
  • MAS 3507D MPEG 1/2 Layer 2/3 Audio Decoder
  • DAC 3550A Stereo Audio DAC
  • YMZ280B PCMD8 8-Channel PCM/ADPCM Decoder
  • YAC516 DAC16-L Delta Sigma Modulation D/A Converter with 8 times Over-sampling Filter
• Security
  • CAT702 ZN security

MK3 compatible games

• Pump it Up: The 1st Dance Floor
• Pump it Up: The 2nd Dance Floor
• Pump it Up The O.B.G: The 3rd Dance Floor
• Pump it Up The O.B.G: The Season Evolution Dance Floor
• Pump it Up: The Collection
• Pump it Up: The Perfect Collection
• Pump it Up Extra
• Pump it Up The Premiere: The International Dance Floor
• Pump it Up The PREX: The International Dance Floor
• Pump it Up The Rebirth: The 8th Dance Floor
• Pump it Up The Premiere 2: The International 2nd Dance Floor
• Pump it Up The PREX 2
• Pump it Up The Premiere 3: The International 3rd Dance Floor
• Pump it Up The PREX 3: The International 4th Dance Floor

MK5 / MKV

See MKV.

MK5 compatible games

• Pump it Up The Premiere 3: The International 3rd Dance Floor
• Pump it Up The PREX 3: The International 4th Dance Floor
• Pump it Up Exceed: The International 5th Dance Floor
• Pump it Up Exceed 2: The International 6th Dance Floor
• Pump it Up NX: New Xenesis

MK6

Base specs

• Introduces USBPIUIO interface for cabinet and pad inputs/outputs
• GPU: NVIDIA GeForce 5200 FX, 128 MB, AGP
• RAM: 256 MB, e.g. PC3100 Samsung
• Storage media: 2.5" HDDs of several manufacturers

MK6 Rev1

• Started shipping with Exceed 2
• Motherboard
  • Gigabyte GA-8IPE1000MK (rev. 1.x), Socket 478
  • Gigabyte GA-8IG1000MK Rev 2.X, LGA775
• CPU
  • For socket 478: Intel Celeron D, 2.53 GHZ/256/533
• Sound chip still compatible with Exceed 2 and Zero

MK6 Rev2

• Started shipping later during the lifecycle of NX
  • (Some/most?) FX cabs with NX still came with Revision 1
• Motherboard: GA-8I865GME-775-RH Rev 1.X, LGA775
• Sometimes referred to as "MK 7"
• Sound chip NOT compatible with Exceed 2 and Zero

Compatible games

• Pump it Up Exceed 2: The International 6th Dance Floor (only Revision 1)
• Pump it Up NX: New Xenesis (only Revision 1)
• Pump it Up NX2: Next Xenesis
• Pump It Up PRO
• Pump It Up NX Absolute: International 10th Dance Floor
• Pump It Up PRO 2 (no 3D arrow skin)
• Pump It Up 2010 Fiesta (requires RAM upgrade to at least 512 MB)
• Pump It Up 2011 Fiesta EX (requires RAM upgrade to at least 512 MB)
• Pump It Up 2013 Fiesta 2 (requires RAM upgrade to at least 512 MB)
• Pump It Up 2015 Prime (requires RAM upgrade to at least 512 MB, SD mode only)
• Pump It Up 2017 Prime 2 (supposed to run somewhat with Revision 2 but not 1)

Main PCBs for Pump it Up after MK6

These are usually referred to as "MK9" or "MK10/MKX" depending on when released. However, these were never referred to as specific MK versions nor revisions by Andamiro. Compatbility with different software versions might vary.

945

• Motherboard: Gigabyte GA-945GCM-S2L
• CPU: Intel Celeron "L420" 1.6Ghz
• GPU: GeForce 7200GS Low Profile or Geforce 8400GS 256M Low Profile
• RAM: 1GB DDR2 800Mhz
• IO: USBPIUIO
• Bundled with NX2 1.54 and higher
• Anything before NX2 1.54 doesn't work with this revision
• Shipped with upgrades and when buying a FX cabinet at that time

G31

• Motherboard: Gigabyte G31M
• CPU: Intel Celeron "L430" 1.8Ghz
• GPU: Nvidia GeForce 8400GS 256MB Low Profile
• RAM: 512MB DDR2 800Mhz
• IO: USBPIUIO
• Bundled with Fiesta when buying a TX cabinet at that time
• GPU last compatible card with Fiesta/FiestaEX

G41

Asrock G41

• Motherboard: Asrock G41M-S3
• GPU: Nvidia GeForce GT210 or Geforce 9300GS
• CPU: Intel Celeron "L430" 1.8Ghz
• RAM: 1 GB
• IO: USBPIUIO
• Hardware shipped with Pump it Up Jump cabinets

Gigabyte G41

• Motherboard: Gigabyte G41M
• CPU: Intel Celeron "L430" 1.8Ghz
• RAM: 1 GB
• GPU: Nvidia GeForce GT210 or Geforce 9300GS
• IO: USBPIUIO
• Bundled with Fiesta 2 when buying a CX cabinet at that time
• GPU last compatible card with Fiesta 2 OS

H81

• Official name: MCU: MK-8171
• Motherboard: Asrock H81M-DGS REV2.01
• CPU: Intel Celeron G1840/2.8GHz
• GPU: Nvidia GeForce GT710 1GB 64bit GDDR3
• IO: LXIO and USBPIUIO with breakout cables for LXIO "hanging out"
• RAM: 2 GB
• Bundled with Pump It Up XX upgrade kit

H310

H610

• Official name: MCU: MK-6171
• Motherboard: GIGABYTE H610M-K DDR4
• CPU: Intel Celeron G6900
• GPU: Nvidia GeForce GT710 1GB 64bit GDDR3
• IO: LXIO and USBPIUIO with breakout cables for LXIO "hanging out"
• RAM: 8 GB DDR4-3200
• Bundled with Pump It Up Phoenix upgrade kit