Taiko no Tatsujin Nijiiro Controller Setup

I/O Settings

!!! tip "" Enter the I/O setup screen by pressing F1 on the attract screen then using arrow keys and ENTER navigate to I/O TEST -> TAIKO TEST. For the best settings copy the image below. If you wish you can adjust these settings to your liking.

!!! note "Controllers:" Below is a quick introduction and setup guide for the commonly used input methods.

Keyboard

!!! tip "" Keyboard is the default input method.
The default layout uses DF JK for the drum input, P to insert card, and ENTER to add coins.
If you wish to view or change all the default keybinds, you can do so in keyconfig.toml.

!!! danger "Warning:" If you use a jp layout keyboard you may need to enable jp_layout =, auto_ime = in config.toml.

Controller

!!! tip "" The setup for both drum and normal controllers is the same.
In config.toml set wait_period = to 0.

If you are using a controller that does not use keyboard inputs then you need to
set SDL keybinds in `keyconfig.toml`, a list of valid SDL inputs can be found at the bottom of `keyconfig.toml`

!!! danger "Warning:" If you use an analog input for the drums you may need to enable analog_input = in config.toml.

!!! danger "Warning:" If you using 2 controllers use JoyToKey and remove SDL inputs from keyconfig.toml.

Card Reader

!!! tip "" The setup for aic pico and acr122u are different.
In config.toml set [card_reader] to true.

If you are using an aic pico update to the latest [firmware](https://github.com/whowechina/aic_pico).                                           
Inside `AMFWConfig.ini` change com4 to the port of your aic pico                  

If you are using an acr122u or similar.                                                                    
Use AkaiiKitsune's [tal-cardreader plugin](https://gitea.farewell.dev/AkaiiKitsune/tal-cardreader)

Arcade Drums and other Controllers

!!! tip "" If you're interested in connecting a real cabinet Drum, or possibly even DIYing your own controller, the Cons&Stuff website and Discord community is a great place to start!

2.5 KiB Raw Blame History