mirror of
https://github.com/djhackersdev/bemanitools.git
synced 2024-12-18 09:15:53 +01:00
30 lines
1.3 KiB
Markdown
30 lines
1.3 KiB
Markdown
This library drives a "legacy" ezusb IO board, also known as C02/D01 IO, and
|
|
implements the iidxio API of BT5. Thus, it allows you to use this IO board with
|
|
*any* version of IIDX that is supported by BT5.
|
|
|
|
# Setup
|
|
* Rename iidxio-ezusb.dll to iidxio.dll.
|
|
* Ensure that your gamestart.bat actually injects the appropriate iidxhook dll,
|
|
for example:
|
|
```
|
|
*inject iidxhook3.dll bm2dx.exe ...*
|
|
```
|
|
or
|
|
```
|
|
launcher -K iidxhook4.dll bm2dx.dll ...*
|
|
```
|
|
* Before running the game, you have to flash a set of binaries to your IO board
|
|
(base firmware and FPGA). The iidxio-ezusb.dll does NOT take care of this and
|
|
only drives the hardware during gameplay. The binary images required are not
|
|
included with BT5.
|
|
* Use the ezusb-tool.exe binary included in the tools sub-package to flash the
|
|
appropriate ezusb base firmware. Once the firmware is flashed successfully,
|
|
the status LEDs on the side of the board should show a blinking pattern.
|
|
* Use the ezusb-iidx-fpga-flash.exe binary to flash the appropriate FPGA binary
|
|
dump to the FPGA.
|
|
* There is a script called ezusb-boot.bat which combines the two steps above
|
|
and can be integrated into the startup process of a dedicated setup.
|
|
* If you are using a D01 IO board, use the `fpga-d01.bin` file instead of the
|
|
`fpga.bin` file.
|
|
* If you ignore these steps, you will either run into errors or parts of the
|
|
IO board won't work (e.g. lights). |