mirror of
https://github.com/djhackersdev/bemanitools.git
synced 2024-11-30 17:24:30 +01:00
32 lines
1.4 KiB
Markdown
32 lines
1.4 KiB
Markdown
This library drives a "legacy" ezusb IO board, also known as C02/D01 IO, and implements the iidxio
|
|
API of BT5. Thus, it allows you to use this IO board with *any* version of IIDX that is supported by
|
|
BT5.
|
|
|
|
# Setup
|
|
|
|
- Rename iidxio-ezusb.dll to iidxio.dll.
|
|
- Ensure that your gamestart.bat actually injects the appropriate iidxhook dll, for example:
|
|
|
|
```
|
|
*inject iidxhook3.dll bm2dx.exe ...*
|
|
```
|
|
|
|
or
|
|
|
|
```
|
|
launcher -K iidxhook4.dll bm2dx.dll ...*
|
|
```
|
|
|
|
- Before running the game, you have to flash a set of binaries to your IO board (base firmware and
|
|
FPGA). The iidxio-ezusb.dll does NOT take care of this and only drives the hardware during
|
|
gameplay. The binary images required are not included with BT5.
|
|
- Use the ezusb-tool.exe binary included in the tools sub-package to flash the appropriate ezusb
|
|
base firmware. Once the firmware is flashed successfully, the status LEDs on the side of the board
|
|
should show a blinking pattern.
|
|
- Use the ezusb-iidx-fpga-flash.exe binary to flash the appropriate FPGA binary dump to the FPGA.
|
|
- There is a script called ezusb-boot.bat which combines the two steps above and can be integrated
|
|
into the startup process of a dedicated setup.
|
|
- If you are using a D01 IO board, use the `fpga-d01.bin` file instead of the `fpga.bin` file.
|
|
- If you ignore these steps, you will either run into errors or parts of the IO board won't work
|
|
(e.g. lights).
|