mirror of
https://github.com/exA-Arcadia/exa-io.git
synced 2024-11-24 06:30:11 +01:00
24 lines
1015 B
Markdown
24 lines
1015 B
Markdown
# Programming
|
|
|
|
Plug the micro-USB port on the edge of td-io into a computer. It will appear as a USB flash drive. Drag and drop the firmware U2F file onto the flash drive. When programming is complete, the drive will disconnect automatically.
|
|
|
|
Once programmed, the white button must be held when plugging in the USB cable to re-enter programming mode.
|
|
|
|
# Basic test
|
|
|
|
1. Power the board via a JAMMA supergun.
|
|
|
|
2. Measure the pins on the JVS power connector and make sure the +3.3V line measures between 3.27V and 3.39V.
|
|
|
|
3. Ensure the volume pot turns smoothly and is not loose.
|
|
|
|
4. Set the switch default positions to 2 coin chutes and mono sound.
|
|
|
|
# Functionality test
|
|
|
|
5. Attach a JVS host to the JVS connectors. Ensure that the green LED illuminates once the host initializes JVS.
|
|
|
|
6. Attach a sound source to the RCA connectors. Ensure that the sound is audible via either the JAMMA connector or via the stereo header.
|
|
|
|
7. Attach a video source to the VGA connector. Ensure that video appears via the supergun.
|