Fix builds

FixLocaleIssues/Properties/AssemblyInfo.cs

@@ -1,35 +0,0 @@
-using System.Reflection;
-using System.Runtime.InteropServices;
-
-// General Information about an assembly is controlled through the following 
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("FixLocaleIssues")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("FixLocaleIssues")]
-[assembly: AssemblyCopyright("Copyright ©  2024")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-// Setting ComVisible to false makes the types in this assembly not visible 
-// to COM components.  If you need to access a type in this assembly from 
-// COM, set the ComVisible attribute to true on that type.
-[assembly: ComVisible(false)]
-
-// The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("48B5F480-D749-48E9-9D26-E0E5260D95DE")]
-
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version 
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Build and Revision Numbers 
-// by using the '*' as shown below:
-// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]

LooseDBTables/LooseDBTables.csproj

@@ -6,6 +6,7 @@
         <ImplicitUsings>enable</ImplicitUsings>
         <Nullable>enable</Nullable>
         <AssemblyName>Assembly-CSharp.LooseDBTables.mm</AssemblyName>
+        <NoWarn>CS0626,CS0436,CS8618</NoWarn>
     </PropertyGroup>
 
     <ItemGroup>

LooseDBTables/Properties/AssemblyInfo.cs

@@ -1,35 +0,0 @@
-using System.Reflection;
-using System.Runtime.InteropServices;
-
-// General Information about an assembly is controlled through the following 
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("LooseDBTables")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("LooseDBTables")]
-[assembly: AssemblyCopyright("Copyright ©  2024")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-// Setting ComVisible to false makes the types in this assembly not visible 
-// to COM components.  If you need to access a type in this assembly from 
-// COM, set the ComVisible attribute to true on that type.
-[assembly: ComVisible(false)]
-
-// The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("F15988CC-BDF0-4F86-811B-BAE18EEA6519")]
-
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version 
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Build and Revision Numbers 
-// by using the '*' as shown below:
-// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]

MoreChartFormats/MoreChartFormats.csproj

@@ -6,6 +6,7 @@
         <ImplicitUsings>enable</ImplicitUsings>
         <Nullable>enable</Nullable>
         <AssemblyName>Assembly-CSharp.MoreChartFormats.mm</AssemblyName>
+        <NoWarn>CS8618,CS8625</NoWarn>
     </PropertyGroup>
 
     <ItemGroup>

MoreChartFormats/Properties/AssemblyInfo.cs

@@ -1,35 +0,0 @@
-using System.Reflection;
-using System.Runtime.InteropServices;
-
-// General Information about an assembly is controlled through the following 
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("MoreChartFormats")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("MoreChartFormats")]
-[assembly: AssemblyCopyright("Copyright ©  2024")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-// Setting ComVisible to false makes the types in this assembly not visible 
-// to COM components.  If you need to access a type in this assembly from 
-// COM, set the ComVisible attribute to true on that type.
-[assembly: ComVisible(false)]
-
-// The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("A375F626-7238-4227-95C9-2BB1E5E099F6")]
-
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version 
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Build and Revision Numbers 
-// by using the '*' as shown below:
-// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]

UnlockFrameRate/Properties/AssemblyInfo.cs

@@ -1,35 +0,0 @@
-using System.Reflection;
-using System.Runtime.InteropServices;
-
-// General Information about an assembly is controlled through the following 
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("UnlockFrameRate")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("UnlockFrameRate")]
-[assembly: AssemblyCopyright("Copyright ©  2024")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-// Setting ComVisible to false makes the types in this assembly not visible 
-// to COM components.  If you need to access a type in this assembly from 
-// COM, set the ComVisible attribute to true on that type.
-[assembly: ComVisible(false)]
-
-// The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("03F046DF-EE3C-4596-87F3-F5AA131EF401")]
-
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version 
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Build and Revision Numbers 
-// by using the '*' as shown below:
-// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]

UnlockFrameRate/UnlockFrameRate.csproj

@@ -1,7 +1,7 @@
 <Project Sdk="Microsoft.NET.Sdk">
 
   <PropertyGroup>
-    <TargetFramework>net45</TargetFramework>
+    <TargetFramework>net46</TargetFramework>
     <LangVersion>latest</LangVersion>
     <AssemblyName>UnlockFrameRate</AssemblyName>
     <Version>1.0.0</Version>
@@ -13,11 +13,6 @@
     <PackageReference Include="BepInEx.Analyzers" Version="1.*" PrivateAssets="all"/>
     <PackageReference Include="BepInEx.Core" Version="5.*"/>
     <PackageReference Include="BepInEx.PluginInfoProps" Version="1.*"/>
-    <PackageReference Include="UnityEngine.Modules" Version="5.6.0" IncludeAssets="compile"/>
-    <Reference Include="MonoMod">
-      <HintPath>..\External\MonoMod.exe</HintPath>
-      <Private>False</Private>
-    </Reference>
     <Reference Include="Assembly-CSharp">
       <HintPath>..\External\Assembly-CSharp.dll</HintPath>
       <Private>False</Private>
@@ -30,6 +25,10 @@
       <HintPath>..\External\UnityEngine.CoreModule.dll</HintPath>
       <Private>False</Private>
     </Reference>
+    <Reference Include="UnityEngine.IMGUIModule">
+      <HintPath>..\External\UnityEngine.IMGUIModule.dll</HintPath>
+      <Private>False</Private>
+    </Reference>
   </ItemGroup>
 
   <ItemGroup Condition="'$(TargetFramework.TrimEnd(`0123456789`))' == 'net'">