idac: 837-15070 board implementation

board/led15070-cmd.h

@@ -0,0 +1,81 @@
+#pragma once
+
+#include "board/led15070-frame.h"
+
+/* Command IDs */
+
+enum {
+    LED_15070_CMD_RESET                     = 0x10,
+    LED_15070_CMD_SET_INPUT                 = 0x28, // No known use case
+    LED_15070_CMD_SET_NORMAL_12BIT          = 0x30, // TODO
+    LED_15070_CMD_SET_NORMAL_8BIT           = 0x31,
+    LED_15070_CMD_SET_MULTI_FLASH_8BIT      = 0x32,
+    LED_15070_CMD_SET_MULTI_FADE_8BIT       = 0x33,
+    LED_15070_CMD_SET_PALETTE_7_NORMAL_LED  = 0x34, // No known use case
+    LED_15070_CMD_SET_PALETTE_6_FLASH_LED   = 0x35, // No known use case
+    LED_15070_CMD_SET_15DC_OUT              = 0x36, // No known use case
+    LED_15070_CMD_SET_15GS_OUT              = 0x37, // No known use case
+    LED_15070_CMD_SET_PSC_MAX               = 0x38, // No known use case
+    LED_15070_CMD_SET_FET_OUTPUT            = 0x39,
+    LED_15070_CMD_SET_GS_PALETTE            = 0x3A,
+    LED_15070_CMD_DC_UPDATE                 = 0x3B,
+    LED_15070_CMD_GS_UPDATE                 = 0x3C,
+    LED_15070_CMD_ROTATE                    = 0x3E, // No known use case, wtf is this?
+    LED_15070_CMD_SET_DC_DATA               = 0x3F,
+    LED_15070_CMD_EEPROM_WRITE              = 0x7B,
+    LED_15070_CMD_EEPROM_READ               = 0x7C,
+    LED_15070_CMD_ACK_ON                    = 0x7D,
+    LED_15070_CMD_ACK_OFF                   = 0x7E,
+    LED_15070_CMD_BOARD_INFO                = 0xF0,
+    LED_15070_CMD_BOARD_STATUS              = 0xF1,
+    LED_15070_CMD_FW_SUM                    = 0xF2,
+    LED_15070_CMD_PROTOCOL_VER              = 0xF3,
+    LED_15070_CMD_TO_BOOT_MODE              = 0xFD,
+    LED_15070_CMD_FW_UPDATE                 = 0xFE,
+};
+
+/* Response codes */
+
+enum {
+    LED_15070_STATUS_OK                     = 0x01,
+    LED_15070_STATUS_SUM_ERR                = 0x02,
+    LED_15070_STATUS_PARITY_ERR             = 0x03,
+    LED_15070_STATUS_FRAMING_ERR            = 0x04,
+    LED_15070_STATUS_OVERRUN_ERR            = 0x05,
+    LED_15070_STATUS_BUFFER_OVERFLOW        = 0x06,
+};
+
+enum {
+    LED_15070_REPORT_OK                     = 0x01,
+    LED_15070_REPORT_WAIT                   = 0x02,
+    LED_15070_REPORT_ERR1                   = 0x03,
+    LED_15070_REPORT_ERR2                   = 0x04,
+};
+
+/* Request data structures */
+
+struct led15070_req_any {
+    struct led15070_hdr hdr;
+    uint8_t cmd;
+    uint8_t payload[256];
+};
+
+/* Response data structures */
+
+struct led15070_resp_any {
+    struct led15070_hdr hdr;
+    uint8_t status;
+    uint8_t cmd;
+    uint8_t report;
+    uint8_t data[32];
+};
+
+struct led15070_resp_board_info {
+    struct led15070_hdr hdr;
+    uint8_t status;
+    uint8_t cmd;
+    uint8_t report;
+    char board_num[8];
+    uint8_t endcode; // Always 0xFF
+    uint8_t fw_ver;
+};

board/led15070-frame.c

@@ -0,0 +1,194 @@
+#include <windows.h>
+
+#include <assert.h>
+#include <stdbool.h>
+#include <stddef.h>
+#include <stdint.h>
+
+#include "board/led15070-frame.h"
+
+#include "hook/iobuf.h"
+
+static void led15070_frame_sync(struct iobuf *src);
+static HRESULT led15070_frame_accept(const struct iobuf *dest);
+static HRESULT led15070_frame_encode_byte(struct iobuf *dest, uint8_t byte);
+
+/* Frame structure:
+
+   [0] Sync byte (0xE0)
+   [1] Destination address
+   [2] Source Address
+   [3] Length of data/payload
+   [4] Data/payload
+        For requests (host to board):
+            [0] Command
+            ... Payload
+        For responses (board to host):
+            [0] Status
+            [1] Command
+            [2] Report
+            ... Payload
+   [n] Checksum: Sum of all prior bytes (excluding sync byte)
+
+   Byte stuffing:
+
+   0xD0 is an escape byte. Un-escape the subsequent byte by adding 1. */
+
+static void led15070_frame_sync(struct iobuf *src)
+{
+    size_t i;
+
+    for (i = 0 ; i < src->pos && src->bytes[i] != 0xE0 ; i++);
+
+    src->pos -= i;
+    memmove(&src->bytes[0], &src->bytes[i], i);
+}
+
+static HRESULT led15070_frame_accept(const struct iobuf *dest)
+{
+    uint8_t checksum;
+    size_t i;
+
+    if (dest->pos < 3 || dest->pos != dest->bytes[3] + 5) {
+        return S_FALSE;
+    }
+
+    checksum = 0;
+
+    for (i = 1 ; i < dest->pos - 1 ; i++) {
+        checksum += dest->bytes[i];
+    }
+    
+    //dprintf("LED checksum %02x, expected %02x\n", checksum, dest->bytes[dest->pos - 1]);
+    
+    if (checksum != dest->bytes[dest->pos - 1]) {
+        return HRESULT_FROM_WIN32(ERROR_CRC);
+    }
+
+    return S_OK;
+}
+
+HRESULT led15070_frame_decode(struct iobuf *dest, struct iobuf *src)
+{
+    uint8_t byte;
+    bool escape;
+    size_t i;
+    HRESULT hr;
+
+    assert(dest != NULL);
+    assert(dest->bytes != NULL || dest->nbytes == 0);
+    assert(dest->pos <= dest->nbytes);
+    assert(src != NULL);
+    assert(src->bytes != NULL || src->nbytes == 0);
+    assert(src->pos <= src->nbytes);
+
+    led15070_frame_sync(src);
+
+    dest->pos = 0;
+    escape = false;
+
+    for (i = 0, hr = S_FALSE ; i < src->pos && hr == S_FALSE ; i++) {
+        /* Step the FSM to unstuff another byte */
+
+        byte = src->bytes[i];
+
+        if (dest->pos >= dest->nbytes) {
+            hr = HRESULT_FROM_WIN32(ERROR_INSUFFICIENT_BUFFER);
+        } else if (i == 0) {
+            dest->bytes[dest->pos++] = byte;
+        } else if (byte == 0xE0) {
+            hr = E_FAIL;
+        } else if (byte == 0xD0) {
+            if (escape) {
+                hr = E_FAIL;
+            }
+
+            escape = true;
+        } else if (escape) {
+            dest->bytes[dest->pos++] = byte + 1;
+            escape = false;
+        } else {
+            dest->bytes[dest->pos++] = byte;
+        }
+
+        /* Try to accept the packet we've built up so far */
+
+        if (SUCCEEDED(hr)) {
+            hr = led15070_frame_accept(dest);
+        }
+    }
+
+    /* Handle FSM terminal state */
+
+    if (hr != S_FALSE) {
+        /* Frame was either accepted or rejected, remove it from src */
+        memmove(&src->bytes[0], &src->bytes[i], src->pos - i);
+        src->pos -= i;
+    }
+
+    return hr;
+}
+
+HRESULT led15070_frame_encode(
+        struct iobuf *dest,
+        const void *ptr,
+        size_t nbytes)
+{
+    const uint8_t *src;
+    uint8_t checksum;
+    uint8_t byte;
+    size_t i;
+    HRESULT hr;
+
+    assert(dest != NULL);
+    assert(dest->bytes != NULL || dest->nbytes == 0);
+    assert(dest->pos <= dest->nbytes);
+    assert(ptr != NULL);
+
+    src = ptr;
+
+    assert(nbytes >= 3 && src[0] == 0xE0 && src[3] + 4 == nbytes);
+
+    if (dest->pos >= dest->nbytes) {
+        return HRESULT_FROM_WIN32(ERROR_INSUFFICIENT_BUFFER);
+    }
+
+    dest->bytes[dest->pos++] = 0xE0;
+    checksum = 0;
+    // dprintf("%02x ", 0xe0);
+
+    for (i = 1 ; i < nbytes ; i++) {
+        byte = src[i];
+        checksum += byte;
+        // dprintf("%02x ", byte);
+
+        hr = led15070_frame_encode_byte(dest, byte);
+
+        if (FAILED(hr)) {
+            return hr;
+        }
+    }
+    // dprintf("%02x \n", checksum);
+
+    return led15070_frame_encode_byte(dest, checksum);
+}
+
+static HRESULT led15070_frame_encode_byte(struct iobuf *dest, uint8_t byte)
+{
+    if (byte == 0xE0 || byte == 0xD0) {
+        if (dest->pos + 2 > dest->nbytes) {
+            return HRESULT_FROM_WIN32(ERROR_INSUFFICIENT_BUFFER);
+        }
+
+        dest->bytes[dest->pos++] = 0xD0;
+        dest->bytes[dest->pos++] = byte - 1;
+    } else {
+        if (dest->pos + 1 > dest->nbytes) {
+            return HRESULT_FROM_WIN32(ERROR_INSUFFICIENT_BUFFER);
+        }
+
+        dest->bytes[dest->pos++] = byte;
+    }
+
+    return S_OK;
+}

board/led15070-frame.h

@@ -0,0 +1,26 @@
+#pragma once
+
+#include <windows.h>
+
+#include <stddef.h>
+#include <stdint.h>
+
+#include "hook/iobuf.h"
+
+enum {
+    LED_15070_FRAME_SYNC = 0xE0,
+};
+
+struct led15070_hdr {
+    uint8_t sync;
+    uint8_t dest_adr;
+    uint8_t src_adr;
+    uint8_t nbytes;
+};
+
+HRESULT led15070_frame_decode(struct iobuf *dest, struct iobuf *src);
+
+HRESULT led15070_frame_encode(
+        struct iobuf *dest,
+        const void *ptr,
+        size_t nbytes);

board/led15070.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#include <windows.h>
+
+#include <stdbool.h>
+#include <stdint.h>
+
+struct led15070_config {
+    bool enable;
+    unsigned int port_no;
+    char board_number[8];
+    uint8_t fw_ver;
+    uint16_t fw_sum;
+    wchar_t eeprom_path[MAX_PATH];
+};
+
+typedef HRESULT (*io_led_init_t)(void);
+typedef void (*io_led_set_fet_output_t)(const uint8_t *rgb);
+typedef void (*io_led_dc_update_t)(const uint8_t *rgb);
+typedef void (*io_led_gs_update_t)(const uint8_t *rgb);
+
+HRESULT led15070_hook_init(
+        const struct led15070_config *cfg,
+        io_led_init_t _led_init,
+        io_led_set_fet_output_t _led_set_fet_output,
+        io_led_dc_update_t _led_dc_update,
+        io_led_gs_update_t _led_gs_update,
+        unsigned int first_port,
+        unsigned int num_boards);

board/meson.build

@@ -25,6 +25,11 @@ board_lib = static_library(
         'led15093-frame.h',
         'led15093.c',
         'led15093.h',
+        'led15070-cmd.h',
+        'led15070-frame.c',
+        'led15070-frame.h',
+        'led15070.c',
+        'led15070.h',
         'sg-cmd.c',
         'sg-cmd.h',
         'sg-frame.c',

dist/idac/segatools.ini

@@ -75,6 +75,15 @@ dipsw3=0
 dipsw4=0
 dipsw5=0
 
+; -----------------------------------------------------------------------------
+; LED settings
+; -----------------------------------------------------------------------------
+
+[led15070]
+; Enable emulation of the 15070-02 controlled lights, which handle the cabinet
+; and seat LEDs.
+enable=1
+
 ; -----------------------------------------------------------------------------
 ; Custom IO settings
 ; -----------------------------------------------------------------------------

idachook/config.c

@@ -13,6 +13,43 @@
 #include "platform/config.h"
 #include "platform/platform.h"
 
+
+void led15070_config_load(struct led15070_config *cfg, const wchar_t *filename)
+{
+    assert(cfg != NULL);
+    assert(filename != NULL);
+
+    wchar_t tmpstr[16];
+
+    cfg->enable = GetPrivateProfileIntW(L"led15070", L"enable", 1, filename);
+    cfg->port_no = GetPrivateProfileIntW(L"led15070", L"portNo", 0, filename);
+    cfg->fw_ver = GetPrivateProfileIntW(L"led15070", L"fwVer", 0x90, filename);
+    /* TODO: Unknown, no firmware file available */
+    cfg->fw_sum = GetPrivateProfileIntW(L"led15070", L"fwSum", 0x0000, filename);
+
+    GetPrivateProfileStringW(
+            L"led15070",
+            L"boardNumber",
+            L"15070-02",
+            tmpstr,
+            _countof(tmpstr),
+            filename);
+
+    size_t n = wcstombs(cfg->board_number, tmpstr, sizeof(cfg->board_number));
+    for (int i = n; i < sizeof(cfg->board_number); i++)
+    {
+        cfg->board_number[i] = ' ';
+    }
+
+    GetPrivateProfileStringW(
+            L"led15070",
+            L"eepromPath",
+            L"DEVICE",
+            cfg->eeprom_path,
+            _countof(cfg->eeprom_path),
+            filename);
+}
+
 void idac_dll_config_load(
         struct idac_dll_config *cfg,
         const wchar_t *filename)
@@ -42,6 +79,7 @@ void idac_hook_config_load(
     zinput_config_load(&cfg->zinput, filename);
     dvd_config_load(&cfg->dvd, filename);
     io4_config_load(&cfg->io4, filename);
+    led15070_config_load(&cfg->led15070, filename);
 }
 
 void zinput_config_load(struct zinput_config *cfg, const wchar_t *filename)

idachook/config.h

@@ -4,6 +4,7 @@
 #include <stddef.h>
 
 #include "board/config.h"
+#include "board/led15070.h"
 
 #include "hooklib/dvd.h"
 
@@ -19,6 +20,7 @@ struct idac_hook_config {
     struct io4_config io4;
     struct idac_dll_config dll;
     struct zinput_config zinput;
+    struct led15070_config led15070;
 };
 
 void idac_dll_config_load(

idachook/dllmain.c

@@ -67,24 +67,31 @@ static DWORD CALLBACK idac_pre_startup(void)
         goto fail;
     }
 
-    hr = sg_reader_hook_init(&idac_hook_cfg.aime, 3, 3, idac_hook_mod);
-
-    if (FAILED(hr)) {
-        goto fail;
-    }
-
     hr = idac_dll_init(&idac_hook_cfg.dll, idac_hook_mod);
 
     if (FAILED(hr)) {
         goto fail;
     }
 
+    hr = sg_reader_hook_init(&idac_hook_cfg.aime, 3, 3, idac_hook_mod);
+
+    if (FAILED(hr)) {
+        goto fail;
+    }
+
     hr = idac_io4_hook_init(&idac_hook_cfg.io4);
 
     if (FAILED(hr)) {
         goto fail;
     }
 
+    hr = led15070_hook_init(&idac_hook_cfg.led15070, idac_dll.led_init, 
+        idac_dll.led_set_fet_output, NULL, idac_dll.led_gs_update, 2, 1);
+
+    if (FAILED(hr)) {
+        goto fail;
+    }
+
     /* Initialize debug helpers */
 
     spike_hook_init(L".\\segatools.ini");

idachook/idac-dll.c

@@ -24,6 +24,18 @@ const struct dll_bind_sym idac_dll_syms[] = {
     }, {
         .sym = "idac_io_get_analogs",
         .off = offsetof(struct idac_dll, get_analogs),
+    }, {
+        .sym = "idac_io_led_init",
+        .off = offsetof(struct idac_dll, led_init),
+    }, {
+        .sym = "idac_io_led_set_fet_output",
+        .off = offsetof(struct idac_dll, led_set_fet_output),
+    }, {
+        .sym = "idac_io_led_gs_update",
+        .off = offsetof(struct idac_dll, led_gs_update),
+    }, {
+        .sym = "idac_io_led_set_leds",
+        .off = offsetof(struct idac_dll, led_set_leds),
     }
 };
 

idachook/idac-dll.h

@@ -11,6 +11,10 @@ struct idac_dll {
     void (*get_gamebtns)(uint8_t *gamebtn);
     void (*get_shifter)(uint8_t *gear);
     void (*get_analogs)(struct idac_io_analog_state *out);
+    HRESULT (*led_init)(void);
+    void (*led_set_fet_output)(const uint8_t *rgb);
+    void (*led_gs_update)(const uint8_t *rgb);
+    void (*led_set_leds)(const uint8_t *rgb);
 };
 
 struct idac_dll_config {

idachook/idachook.def

@@ -17,3 +17,7 @@ EXPORTS
     idac_io_get_gamebtns
     idac_io_get_shifter
     idac_io_get_analogs
+    idac_io_led_init
+    idac_io_led_set_fet_output
+    idac_io_led_gs_update
+    idac_io_led_set_leds

idachook/io4.c

@@ -11,10 +11,12 @@
 #include "util/dprintf.h"
 
 static HRESULT idac_io4_poll(void *ctx, struct io4_state *state);
+static HRESULT idac_io4_write_gpio(uint8_t* payload, size_t len);
 static uint16_t coins;
 
 static const struct io4_ops idac_io4_ops = {
     .poll = idac_io4_poll,
+    .write_gpio = idac_io4_write_gpio
 };
 
 static const uint16_t idac_gear_signals[] = {
@@ -128,3 +130,34 @@ static HRESULT idac_io4_poll(void *ctx, struct io4_state *state)
 
     return S_OK;
 }
+
+static HRESULT idac_io4_write_gpio(uint8_t* payload, size_t len) 
+{
+    // Just fast fail if there aren't enough bytes in the payload
+    if (len < 3) 
+        return S_OK;
+    
+    // This command is used for lights in IDAC, but it only contains button lights,
+    // and only in the first 3 bytes of the payload; everything else is padding to
+    // make the payload 62 bytes. The rest of the cabinet lights and the side button
+    // lights are handled separately, by the 15070 lights controller.
+    uint32_t lights_data = (uint32_t) ((uint8_t)(payload[0]) << 24 |
+        (uint8_t)(payload[1]) << 16 |
+        (uint8_t)(payload[2]) << 8);
+
+    // Since Sega uses an odd ordering for the first part of the bitfield,
+    // let's normalize the data and just send over bytes for the receiver
+    // to interpret as ON/OFF values.
+    uint8_t rgb_out[6] = {
+        lights_data & IDAC_IO_LED_START ? 0xFF : 0x00,
+        lights_data & IDAC_IO_LED_VIEW_CHANGE ? 0xFF : 0x00,
+        lights_data & IDAC_IO_LED_UP ? 0xFF : 0x00,
+        lights_data & IDAC_IO_LED_DOWN ? 0xFF : 0x00,
+        lights_data & IDAC_IO_LED_RIGHT ? 0xFF : 0x00,
+        lights_data & IDAC_IO_LED_LEFT ? 0xFF : 0x00,
+    };
+
+    idac_dll.led_set_leds(rgb_out);
+
+    return S_OK;
+}

idacio/dllmain.c

@@ -19,7 +19,7 @@ static bool idac_io_coin;
 
 uint16_t idac_io_get_api_version(void)
 {
-    return 0x0100;
+    return 0x0101;
 }
 
 HRESULT idac_io_init(void)
@@ -118,3 +118,44 @@ void idac_io_get_analogs(struct idac_io_analog_state *out)
     out->accel = tmp.accel;
     out->brake = tmp.brake;
 }
+
+HRESULT idac_io_led_init(void)
+{
+    return S_OK;
+}
+
+void idac_io_led_set_fet_output(const uint8_t *rgb)
+{
+#if 0
+    dprintf("IDAC LED: LEFT SEAT LED: %02X\n", rgb[0]);
+    dprintf("IDAC LED: RIGHT SEAT LED: %02X\n", rgb[1]);
+#endif
+
+    return;
+}
+
+void idac_io_led_gs_update(const uint8_t *rgb)
+{
+#if 0
+    for (int i = 0; i < 9; i++) {
+        dprintf("IDAC LED: LED %d: %02X %02X %02X Speed: %02X\n",
+                i, rgb[i * 4], rgb[i * 4 + 1], rgb[i * 4 + 2], rgb[i * 4 + 3]);
+    }
+#endif
+
+    return;
+}
+
+void idac_io_led_set_leds(const uint8_t *rgb)
+{
+#if 0
+    dprintf("IDAC LED: START: %02X\n", rgb[0]);
+    dprintf("IDAC LED: VIEW CHANGE: %02X\n", rgb[1]);
+    dprintf("IDAC LED: UP: %02X\n", rgb[2]);
+    dprintf("IDAC LED: DOWN: %02X\n", rgb[3]);
+    dprintf("IDAC LED: RIGHT: %02X\n", rgb[4]);
+    dprintf("IDAC LED: LEFT: %02X\n", rgb[5]);
+#endif
+
+    return;
+}

idacio/idacio.def

@@ -6,3 +6,7 @@ EXPORTS
     idac_io_get_gamebtns
     idac_io_get_shifter
     idac_io_get_analogs
+    idac_io_led_init
+    idac_io_led_set_fet_output
+    idac_io_led_gs_update
+    idac_io_led_set_leds

idacio/idacio.h

@@ -19,6 +19,17 @@ enum {
     IDAC_IO_GAMEBTN_VIEW_CHANGE = 0x20,
 };
 
+enum {
+    /* These are the bitmasks to use when checking which
+       lights are triggered on incoming IO4 GPIO writes. */
+    IDAC_IO_LED_START = 1 << 31,
+    IDAC_IO_LED_VIEW_CHANGE = 1 << 30,
+    IDAC_IO_LED_UP = 1 << 25,
+    IDAC_IO_LED_DOWN = 1 << 24,
+    IDAC_IO_LED_LEFT = 1 << 23,
+    IDAC_IO_LED_RIGHT = 1 << 22,
+};
+
 struct idac_io_analog_state {
     /* Current steering wheel position, where zero is the centered position.
 
@@ -93,3 +104,59 @@ void idac_io_get_analogs(struct idac_io_analog_state *out);
    Minimum API version: 0x0100 */
 
 void idac_io_get_shifter(uint8_t *gear);
+
+/* Initialize LED emulation. This function will be called before any
+   other idac_io_led_*() function calls.
+
+   All subsequent calls may originate from arbitrary threads and some may
+   overlap with each other. Ensuring synchronization inside your IO DLL is
+   your responsibility. 
+   
+   Minimum API version: 0x0101 */
+
+HRESULT idac_io_led_init(void);
+
+/* Update the FET outputs. rgb is a pointer to an array up to 3 bytes.
+
+   The following bits are used to control the FET outputs:
+   [0]: LEFT SEAT LED
+   [1]: RIGHT SEAT LED
+
+   The LED is truned on when the byte is 255 and turned off when the byte is 0.
+
+   Minimum API version: 0x0101 */
+
+void idac_io_led_set_fet_output(const uint8_t *rgb);
+
+/* Update the RGB LEDs. rgb is a pointer to an array up to 32 * 4 = 128 bytes. 
+
+   The LEDs are laid out as follows:
+   [0]: LEFT UP LED
+   [1-2]: LEFT CENTER LED
+   [3]: LEFT DOWN LED
+   [5]: RIGHT UP LED
+   [6-7]: RIGHT CENTER LED
+   [8]: RIGHT DOWN LED
+
+   Each rgb value is comprised for 4 bytes in the order of R, G, B, Speed.
+   Speed is a value from 0 to 255, where 0 is the fastest speed and 255 is the slowest.
+
+   Minimum API version: 0x0101 */
+
+void idac_io_led_gs_update(const uint8_t *rgb);
+
+/* Update the cabinet button LEDs. rgb is a pointer to an array up to 6 bytes.
+
+   The LEDs are laid out as follows:
+   [0]: START LED
+   [1]: VIEW CHANGE LED
+   [2]: UP LED
+   [3]: DOWN LED
+   [4]: RIGHT LED
+   [5]: LEFT LED
+
+   The LED is turned on when the byte is 255 and turned off when the byte is 0.
+
+   Minimum API version: 0x0101 */
+
+void idac_io_led_set_leds(const uint8_t *rgb);

idzhook/dllmain.c

@@ -1,3 +1,14 @@
+/*
+    "Initial D ARCADE STAGE Zero" (idz) hook
+
+    Devices
+
+      JVS:  837-15257 "Type 4" I/O Board
+     COM1:  838-15069 MOTOR DRIVE BD RS232/422 Board
+    COM10:  837-15286 "Gen 2" Aime Reader
+    COM11:  837-15070-02 IC BD LED Controller Board
+*/
+
 #include <windows.h>
 #include <shlwapi.h>