Cool_Tools/bemanitools
1
0
Fork 0
mirror of https://github.com/djhackersdev/bemanitools.git synced 2024-11-24 06:40:11 +01:00
Code Releases Activity
master
bemanitools/doc/vigem/vigem-iidxio.md

2.7 KiB
Raw Permalink Blame History

ViGEm IIDXIO

This application allows you to use any iidxio backend, e.g. iidxio-ezusb.dll, iidxio-ezusb2.dll or iidxio-bio2.dll, to be exposed as three XBOX 360 game controller on Windows.

Thus, it allows you to use a real cabinet with all its IO with any game that supports xinput.

Note: This will not work with games that require Direct Input (dinput), e.g. IIDX Infinitas.

Setup

  • Install ViGEmBus
  • Place the following in the same folder as vigem-iidxio.exe:
    • Get a copy of ViGEmClient.dll (or from bemanitools-supplements)
    • Rename your corresponding iidxio-XXX.dll, e.g. iidxio-bio2.dll, to iidxio.dll.
  • Run vigem-iidxio.exe so that the config file gets created (on first start)
  • Edit vigem-iidxio.conf if needed. Available options are explained in the file

Usage

  • Depending on the iidxio implementation used, you might have to do some setup, e.g. flashing your IO board for ezusb or ezusb2
  • Run vigem-iidxio.exe and keep it open/running
  • To quit the program, hit the TEST and SERVICE buttons at the same time

Input mappings

| Cabinet | XBOX Gamepad 1 | XBOX Gamepad 2 | XBOX Gamepad 3 | |------------|--------------------|--------------------|--------------------| | P1 Key 1 | A | | | | P1 Key 2 | B | | | | P1 Key 3 | X | | | | P1 Key 4 | Y | | | | P1 Key 5 | Left shoulder | | | | P1 Key 6 | Rights houlder | | | | P1 Key 7 | Start | | | | P2 Key 1 | | A | | | P2 Key 2 | | B | | | P2 Key 3 | | X | | | P2 Key 4 | | Y | | | P2 Key 5 | | Left shoulder | | | P2 Key 6 | | Rights houlder | | | P2 Key 7 | | Start | | | Start P1 | Back | | | | Start P2 | | Back | | | VEFX | | | B | | Effect | | | A | | Test | | | X | | Service | | | Y | | Coin | | | Start | | TT P1 Up | Thumbstick X axis+ | | | | TT P1 Down | Thumbstick X axis- | | | | TT P2 Up | | Thumbstick X axis+ | | | TT P2 Down | | Thumbstick X axis- | |

Turntables are either in absolute or relative mode depending on how it's defined in the vigem-iidxio.conf.

Additional Notes For Cabinets (Running on embedded Windows 7):

  • Make sure that you follow the instructions exactly from the release page (Prerequisites for Windows 7)
  • If you get an error while trying to install KB3033929, re-enable windows update
  • If you can't find some of these files, see bemanitools-supplements
  • Make sure to ewfmgr C: -commit and reboot after installing the drivers (this only needs to be done once)