mirror of
https://github.com/djhackersdev/bemanitools.git
synced 2024-11-28 00:10:51 +01:00
53 lines
2.7 KiB
Markdown
53 lines
2.7 KiB
Markdown
# ViGEm IIDXIO
|
|
|
|
This application allows you to use any iidxio backend, e.g. `iidxio-ezusb.dll`, `iidxio-ezusb2.dll`
|
|
or `iidxio-bio2.dll`, to be exposed as three XBOX 360 game controller on Windows.
|
|
|
|
Thus, it allows you to use a real cabinet with all its IO with *any* game that supports xinput.
|
|
|
|
Note: This will not work with games that require Direct Input (dinput), e.g. IIDX Infinitas.
|
|
|
|
## Setup
|
|
|
|
- Install [ViGEmBus](https://github.com/ViGEm/ViGEmBus/releases)
|
|
- Source for compiled binaries:
|
|
[bemanitools-supplement](https://dev.s-ul.eu/djhackers/bemanitools-supplement)
|
|
- Place the following in the same folder as `vigem-iidxio.exe`:
|
|
- Get a copy of [ViGEmClient.dll](https://bin.jvnv.net/file/ZgMJK/ViGEmClient.zip) (or from
|
|
bemanitools-supplements)
|
|
- Rename your corresponding `iidxio-XXX.dll`, e.g. `iidxio-bio2.dll`, to `iidxio.dll`.
|
|
- Run `vigem-iidxio.exe` so that the config file gets created (on first start)
|
|
- Edit `vigem-iidxio.conf` if needed. Available options are explained in the file
|
|
|
|
## Usage
|
|
|
|
- Depending on the iidxio implementation used, you might have to do some setup, e.g. flashing your
|
|
IO board for [ezusb](../iidxhook/iidxio-ezusb.md#setup) or
|
|
[ezusb2](../iidxhook/iidxio-ezusb2.md#setup)
|
|
- Run `vigem-iidxio.exe` and keep it open/running
|
|
- To quit the program, hit the `TEST` and `SERVICE` buttons at the same time
|
|
|
|
## Input mappings
|
|
|
|
| Cabinet | XBOX Gamepad 1 | XBOX Gamepad 2 | XBOX Gamepad 3 |
|
|
|------------|--------------------|--------------------|--------------------| | P1 Key 1 | A | | | |
|
|
P1 Key 2 | B | | | | P1 Key 3 | X | | | | P1 Key 4 | Y | | | | P1 Key 5 | Left shoulder | | | | P1
|
|
Key 6 | Rights houlder | | | | P1 Key 7 | Start | | | | P2 Key 1 | | A | | | P2 Key 2 | | B | | | P2
|
|
Key 3 | | X | | | P2 Key 4 | | Y | | | P2 Key 5 | | Left shoulder | | | P2 Key 6 | | Rights houlder
|
|
| | | P2 Key 7 | | Start | | | Start P1 | Back | | | | Start P2 | | Back | | | VEFX | | | B | |
|
|
Effect | | | A | | Test | | | X | | Service | | | Y | | Coin | | | Start | | TT P1 Up | Thumbstick X
|
|
axis+ | | | | TT P1 Down | Thumbstick X axis- | | | | TT P2 Up | | Thumbstick X axis+ | | | TT P2
|
|
Down | | Thumbstick X axis- | |
|
|
|
|
Turntables are either in absolute or relative mode depending on how it's defined in the
|
|
`vigem-iidxio.conf`.
|
|
|
|
## Additional Notes For Cabinets (Running on embedded Windows 7):
|
|
|
|
- Make sure that you follow the instructions exactly from the release page
|
|
([Prerequisites for Windows 7](https://github.com/ViGEm/ViGEmBus/wiki/Prerequisites-for-Windows-7))
|
|
- If you get an error while trying to install KB3033929, re-enable windows update
|
|
- If you can't find some of these files, see bemanitools-supplements
|
|
- Make sure to ewfmgr C: -commit and reboot after installing the drivers (this only needs to be done
|
|
once)
|