bemanitools/doc/iidxhook/iidxhook3.md

Game list

The following games are compatible with this version of iidxhook:

• GOLD
• DJ Troopers
• EMPRESS
• SIRIUS

The games must be bootstrapped using inject.

Data setup and running the game

Ensure your folder with your unpacked data looks like this:

• yyyymmddrr (y = year digit, m = month digit, d = day digit, r = revision digit) revision folder containing game binary and libraries
• data
• sidcode.txt

Any further files are optional and not required to just run the game.

Unpack the package containing iidxhook3 into the revision folder of your choice. Most likely, you want to target the latest revision you have to run the latest binary of the game with any bugfixes by developers.

Run the gamestart-XX.bat file as admin where XX is the version of your choice that's supported by this hook.

Configuring iidxhook

The hook library can be configured via cmd arguments or a configuration file. The latter is generated (iidxhook.conf in the same directory) on the first start of the game using the gamestart-XX.bat file. It contains default values for all available parameters and comments explaining each parameter. Please follow the comments when configuring your setup.

Add the argument -h when running gamestart-XX.bat (e.g. gamestart-XX.bat -h) to print help/usage information with a list of all available parameters. Every parameter can be either set as command line argument or using a configuration file.

To set a parameter from the command line, just add it as an argument after the bat file like this

gamestart-09.bat -p gfx.windowed=true -p gfx.framed=true

The syntax for the "key=value" is the same as in the config file. Make sure to have a pre-ceeding "-p" for every parameter added.

However, if a parameter is specifed in the configuration file and as a command line argument, the command line argument overrides the config file's value.

Eamuse network setup

If you want to run the games online, you have to set a valid PCBID and EAMID (use the PCBID as the EAMID) in the configuration file or as a command line argument. You also have to set the url of the eamuse server you want to connect to.

Additional note regarding EAMID: This is new compared to the prior games and is provided as the identifier of the "eamuse license" to the server. Depending on the implementation of the server, this can lead to authentication failure resulting in a network error on boot or warning during gameplay.

Run the game with the gamestart-XX.bat file and enable network on the operator menu. When enabled, the game seems to hang and expects you to power cycle the machine (i.e. quit the game and restart it).

Real hardware support

USB IO (ezusb)

Use the specific iidxio API implementations, e.g. iidxio-ezusb2.dll to use the IO2 EZUSB board, to run the game on real hardware. Thanks to a common abstraction layer, you can also use custom IO boards or whatever Konami hardware is going to be available in the future. Obviously, someone has to write a driver, first.

Slotted/Wave pass card readers

Replace the default eamio.dll with the eamio-icca.dll and have either your slotted (IIDX, DDR Supernova or GF/DM type) or new wave pass card readers conencted and and assigned to COM1.

ICCA device settings (device manager)

• Port: COM1
• BAUD rate: 57600
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None

If you encounter issues after the game opened the device, e.g. application stuck, try a USB <-> COM dongle instead of using one of the COM ports of the mainboard.

Known bugs

USBIO (FM-DL TIMEOUT)

IIDX occasionally fails to boot with a "USBIO (FM-DL TIMEOUT)" error. If this happens, run the game again.

Troubleshooting and FAQ

The game does not start at all

If you try to run iidx16 or iidx17 and you see one of the following outputs when running the gamestart-XX.bat script:

Failed to launch hook EXE: 00000002

or

Injecting: iidxhook3.dll
Debug active process
Resuming remote process...

Make sure to check if you are using non htpac'd executables on iidx16 and iidx17 and also non htpac'd libraries/dll files on iidx17. These won't work with BT and injecting the hook libraries.

The game does not run "well" (frame drops, drifting offsync etc)

This can be related to various issues:

• Make sure to run the game as (true) Administrator especially on Windows 7 and newer. This will also get rid of various other errors (see below) that are related to permission issues.
• Run the game's process with a higher priority:

start "" /relatime "gamestart.bat"

• Enforce v-sync enabled in your GPU settings.
• Ensure that you have a constant refresh rate around the 60 hz (59.9xx or 60.0xx) that is not jumping around. Use the timebase feature of one of the newer games to check that or enable iidxhook's timebase and check the log output for the determined value. Run this a few times and check if the results differ.
• Use iidxhook's frame rate limiter feature (see further below) to software lock the refresh rate. This might be necessary on Windows 7 and newer for D3D8 games, e.g. iidx 9 to 12, which seem to ignore GPU side v-sync.
• Use iidxhook's auto timebase feature (see further below) or set a pre-determined value to cut down start-up times.

"NETWORK WARNING" instead of "NETWORK OK"

This can be caused by:

• Invalid PCBID/EAMID: Ensure both are set to the same ID
• Firewall blocking connections
• Invalid eamuse url or port specified
• Game is not run using the Administrator account Make sure to check these things first

My songs are offsync

The built-in monitor check just determines if the game should sync to either 59.94 hz (S-Video setting) or 60.04 hz (VGA setting). If you don't have a setup that runs on (as close as possible) these values:

• Make sure your machine's refresh rate is stable, e.g. 60.00x hz.
• If you don't get a close to 59.94hz (S-Video setting) or 60.04 hz (VGA setting) refresh rate, go an set the output mode in the operator menu to "VGA" to enforce the game to run chart syncing on 60.04 hz refresh rate (even if your setup does not have that value). Next, use the software monitor check/auto timebase that's built into iidxhook (refer to cmd help/configfile).

My game runs too fast

iidxhook can limit the frame rate for you (refer to help/config file)

My game crashes when I try fullscreen

Use dxwnd and set settings like "Acquire admin caps" and "Fullscreen only"

Background videos aren't working. When starting a song, windows is playing the error sound and a message box appears

You are missing a codec to decode and play the videos. There are different methods available to get background videos working. Probably, the easiest solution: grab the CLVSD.ax file and go to Start -> Run -> regsvr32 clvsd.ax Make sure to run cmd.exe as Administrator, otherwise you will get errors caused by invalid permissions.

All background videos are looking streched (starting with HAPPY SKY)

The game requires on a hardware feature that is not present on newer GPUs. Refer to the help/config file and turn on the UV fix.

I installed the CLVSD.ax codec but the game crashes or displays a message box that tells me to disable my debugger

If songs keep crashing upon start and you get an error message that says

DirectShow Texture3D Sample
Could not create source filter to graph! hr=0x80040266

despite having the codec (CLVSD.ax) installed, remove the debug flag (-D) from gamestart or use a CLVSD.ax codec which has the debugger checks removed.

I used the auto timebase option and/or limited my refresh rate but the songs are still going offsync

There aren't many options left. The old games were developed for specific hardware and are not guaranteed to work well on (especially) newer hardware. Multiple monitor setups can also have a bad impact on a stable refresh rate. Try a setup with just a single monitor you want to use for gameplay physically connected. Furthermore, dedicated and tested/verified hardware by other users is recommended if you want to save yourself a lot of fiddling.

I am getting a message box with a japanese error message and a black window immediately after starting the game

The game checks the vendor and product ID of your GPU installed. If it doesn't match a hardcoded whitelist, the game won't boot. Use the option gfx.pci_id either in the config file or as a cmd argument to spoof these IDs. See the help message for instructions and possible IDs.

Over-/underscan, bad image quality or latency caused by my monitor's/TV's upscaler

Many modern monitors/TVs cannot upscale 640x480 output properly. This can lead to over-/underscan, bad image quality or even latency caused by the upscaler of the device you are using. If one or multiple of these issues apply, use the built in scaling options by setting gfx.scale_back_buffer_width and gfx.scale_back_buffer_height to a target resolution to scale to. Usually, you want to set this to the monitor's native resolution, e.g. 1920x1080 for full HD. You can play around with a few different filters using gfx.scale_back_buffer_filter which impacts image quality/blurriness on upscaling.