1
0
mirror of https://gitea.tendokyu.moe/Dniel97/segatools.git synced 2024-12-12 20:41:05 +01:00
segatools-dniel97/doc/config/chunithm.md
2021-12-27 20:55:10 -05:00

60 lines
1.3 KiB
Markdown

# Chunithm configuration settings
This file describes configuration settings specific to Chunithm.
Keyboard binding settings use
[Virtual-Key Codes](https://docs.microsoft.com/en-us/windows/win32/inputdev/virtual-key-codes).
## `[chuniio]`
Controls the input driver.
### `path`
Specify a path for a third-party Chunithm input driver DLL. Default is empty
(use built-in keyboard IO emulation).
In previous versions of Segatools this was accomplished by replacing the
CHUNIIO.DLL file that came with Segatools. Segatools no longer ships with a
separate CHUNIIO.DLL file (its functionality is now built into CHUNIHOOK.DLL).
## `[io3]`
Cabinet specific inputs.
### `test`
Default `0x31` (`1 Key`)
Key-binding for cabinet test button.
### `service`
Default `0x32` (`2 Key`)
Key-binding for cabinet service button.
### `coin`
Default `0x33` (`3 Key`)
Key-binding for cabinet coin switch.
## `[slider]`
Key bindings for each of the 32 touch cells.
### `cellX`
Defaults to key mappings in left-to-right-order as follows:
```text
SSSSDDDDFFFFGGGGHHHHJJJJKKKKLLLL
```
Key binding for a single touch cell. Replace the `X` with a value from `1` to `32` to bind keys to
each cell, e.g. `cell32=0x53`, `cell1=0x53` etc.
Touch cells are numbered FROM RIGHT TO LEFT! starting from 1. This is in order to match the
numbering used in the operator menu and service manual.