- Only test keys when file is encrypted
- Add clHCA_TestBlock to test a frame with the current key
- Move some key detection code to hca_decoder.c and simplify hca.c
detection
- Decrease number of test frames due to increased accuracy of
clHCA_TestBlock
Decoder has been modified a bit so it's easier to feed an arbitrary
number of discard samples (or at least, easier for me to understand),
since encoder delay can be >1024 (frame size) and would make some calcs
go all wobbly
It was decoding one 28-sample subframes and blocked layout handled
frames, doing some voodoo to skip CD sectors.
Now decodes one 28*8-sample frame and blocked layout handles CD sectors.
Decoding is byte-exact vs before.
- Code now more verbose, but easier to understand (by me, at least)
- Unify normal and badflags code
- Fix hist1 not being properly clamped, though not noticeable
- Fix inFamous (PS3) which seemingly wasn't using the extended table but
hitting some compiler weirdness? (failed in foobar and worked in test)
- Use int math for PSX-cfg, which should be minimally more accurate
Currently same as ms_ima_bytes_to_samples, but this will change; renamed
for consistency with all other IMA variations. Also clean a bit some
metas since I was testing anyway.
This is needed for blocked layout, as it can't do normal interleave.
Probably could be fixed in the future to remove several superfluous
_int/block decoders
The layout was designed to do subframe deinterleave (when
less-than-a-frame bytes of each channel are interleaved) in an array and
pass it to "mem" decoders.
In practice this only happens in a handful of formats, was only used
with DSP, and since making "mem" decoders is required it's simpler to
make normal decoders handling the byte layout directly.
In an effort to simplify vgmstream's layouts, code, and other esoteric
features I changed the old decode_ngc_dsp_mem for decode_ngc_dsp_subint;
results are byte-exact.
EACS was just DVI (high nibble first) with stereo and mono modes, while
old DVI was mono only.
This unifies both decoders, so DVI_IMA (not interleaved) works with mono
and stereo while DVI_IMA_int (interleaved) forces mono.
Some metas needed to explicitly set DVI_IMA_int but others work with no
change.
